Reversed-phase chromatography

Reversed-phase liquid chromatography (RP-LC) is a mode of liquid chromatography in which non-polar stationary phase and polar mobile phases are used for the separation of organic compounds. In the reversed phase mode, the more hydrophobic sample components are retained in the system for longer. The vast majority of separations and analyses using high-performance liquid chromatography (HPLC) in recent years are done using the reversed phase mode. First developed for separating biomolecules, it is now a general technique with many stationary phases available for use in RP-LC, allowing great flexibility in the development of the separation methods.

Some factors affect how the components are retained and separated in RP-LC:

• The chemical nature of the stationary phase. The stationary phase can be coated with some ligands at different bonding densities (how many ligands are bonded per surface area).
• The composition of the mobile phase. The mobile phase may be made of one solvent, or a mixture of several solvents. The solvents can be mixed at different ratios. Different mobile phases have different properties, such as polarity. When a mobile phase consists of mostly one solvent, with some other solvents added in small amounts, those other solvents are called "mobile phase modifiers".
• The pH of the mobile phase, which affect the ionization state of the solutes and their polarity. This can be changed with additives such as buffers.

Usually, the stationary phase is made of a layer of hydrophobic substrate bonded to the surface of porous silica gel particles. The particles come in various shapes (spheric, irregular), at different diameters (sub-2, 3, 5, 7, 10 μm), with varying pore diameters (60, 100, 150, 300 Å). The particle diameters are often given as mesh numbers. For example, 2500-mesh corresponds to a particle diameter of 5 μm. The hydrophobic substrates are generally alkyl chains, such as C3, C4, C8, C18, or more. The longer the chain, the longer the sample components will be retained. It would make the resolution power higher, but also make the chromatography take longer to run. Most current methods of separation of biomedical materials use C18 columns, sometimes called by trade names, such as ODS () or RP-18 (reverse phase 18).

Ordinary silica-based reversed-phase columns work best in a moderate pH range. At very low pH or very high pH, the silica surface and the bonded hydrophobic layer can degrade. For RP-LC at very acidic or alkaline conditions, one can use hydrophobic polymeric particles, or hybridized silica-organic groups particles.

Hydrophobic polymeric particles are made from an organic polymer instead of silica. A common example is polystyrene-divinylbenzene (PS-DVB). The particle itself is hydrophobic, so organic compounds can adsorb to it directly.

Pure silica dissolves in alkaline conditions. Hybrid silica-organic particles are particles whose framework contains both silica units and organic groups. A typical structure is something like: Si–O–Si mixed with Si–R–Si, where R is an organic linker, such as an ethylene group. This makes the particle more resistant to alkaline conditions.

The mobile phases are mixtures of water and polar organic solvents, usually methanol and acetonitrile.  These mixtures usually contain various additives such as buffers (acetate, phosphate, citrate), surfactants (alkyl amines or alkyl sulfonates) and special additives (EDTA). The goal of using supplements of one kind or another is to increase efficiency, selectivity, and control solute retention.