Newcomen engine

Development and application

By 1725 the Newcomen engine was in common use in mining, particularly collieries. It held its place with little material change for the rest of the century. Use of the Newcomen engine was extended in some places to pump municipal water supply; for instance the first Newcomen engine in France was built at Passy in 1726 to pump water from the Seine to the city of Paris. It was also used to power machinery indirectly, by returning water from below a water wheel to a reservoir above it, so that the same water could again turn the wheel. Among the earliest examples of this was at Coalbrookdale. A horse-powered pump had been installed in 1735 to return water to the pool above the Old Blast Furnace. This was replaced by a Newcomen engine in 1742–3. Several new furnaces built in Shropshire in the 1750s were powered in a similar way, including Horsehay and Ketley Furnaces and Madeley Wood or Bedlam Furnaces. The latter does not seem to have had a pool above the furnace, merely a tank into which the water was pumped. In other industries, engine-pumping was less common, but Richard Arkwright used an engine to provide additional power for his cotton mill.