Ladder frame

Ladder frame

Named for its resemblance to a ladder, the ladder frame is one of the oldest, simplest, and most frequently used under-body, separate chassis/frame designs. It consists of two symmetrical beams, rails, or channels, running the length of the vehicle, connected by several transverse cross-members. Initially seen on almost all vehicles, the ladder frame was gradually phased out on cars in favor of perimeter frames and unitized body construction. It is now seen mainly on large trucks. This design offers good side impact resistance because of its continuous rails from front to rear, but poor resistance to torsion or warping if simple, perpendicular cross-members are used. The vehicle's overall height will be greater due to the floor pan sitting above the frame instead of inside it.