Stress–strain curveIn engineering and materials science, a stress–strain curve for a material gives the relationship between the applied pressure, known as stress, and amount of deformation, known as strain. It is obtained by gradually applying load to a test object and measuring the deformation, from which the stress and strain can be determined (see tensile testing).
SteelSteel is an alloy of iron and carbon that demonstrates improved mechanical properties compared to the pure form of iron. Due to its high elastic modulus, yield strength, fracture strength and low raw material cost, steel is one of the most commonly manufactured materials in the world.
Stress (mechanics)Physical quantity that expresses internal forces in a continuous material StressResidual stresses inside a plastic protractor are revealed by polarized light.Common symbolsσSI unitpascalOther unitspsi, barIn SI base unitsPa = kg⋅m−1⋅s−2Dimension L − 1 M T − 2 {\displaystyle {\mathsf {L}}^{-1}{\mathsf {M}}{\mathsf {T}}^{-2}} In continuum mechanics, stress is a physical quantity that describes forces present during deformation.List of materials propertiesA material property is an intensive property of a material, i.e., a physical property or chemical property that does not depend on the amount of the material. These quantitative properties may be used as a metric by which the benefits of one material versus another can be compared, thereby aiding in materials selection. A property having a fixed value for a given material or substance is called material constant or constant of matter.Elasticity (physics)Physical property when materials or objects return to original shape after deformation In continuum mechanics and materials science, elasticity is the ability of a body to resist a distorting influence and to return to its original size and shape when that influence or force is removed. Solid objects will deform when adequate loads are applied to them; if the material is elastic, the object will return to its initial shape and size after removal.
Deformation (engineering)In engineering, deformation is the change in size or shape of an object when subjected to force, and may be elastic or plastic depending on whether the deformation is reversible when the actuating force is removed. An object's intrinsic resistance to deformation is known as its stiffness or rigidity. If the deformation is negligible under stress, the object is said to be rigid; conversely, it is said to be flexible or pliable.
Plasticity (physics)In physics and materials science, plasticity (also known as plastic deformation) is the ability of a solid material to undergo permanent deformation, a non-reversible change of shape in response to applied forces. For example, a solid piece of metal being bent or pounded into a new shape displays plasticity as permanent changes occur within the material itself. In engineering, the transition from elastic behavior to plastic behavior is known as yielding.Work hardeningWork hardening, also known as strain hardening, is the process by which a material's load-bearing capacity (strength) increases during plastic (permanent) deformation. This characteristic is what sets ductile materials apart from brittle materials. Work hardening may be desirable, undesirable, or inconsequential, depending on the application. This strengthening occurs because of dislocation movements and dislocation generation within the crystal structure of the material.
Materials scienceMaterials science is an interdisciplinary field concerned with understanding the relationships between the structure of materials and their properties and using this knowledge to design materials for specific applications. The internal structure of a material—from atomic arrangements to microscopic features—strongly influences its mechanical, electrical, thermal, and optical behavior.
EngineeringEngineering is the practice of systematically applying natural science and mathematics to design and improve systems, devices, or processes that solve problems under constraints. It is typically motivated by satisfying human needs, resulting in creations such as bridges, engines, smartphones, pacemakers, the internet, spacecraft, and washing machines.
AluminiumB↑Al↓Gamagnesium ← aluminium → siliconStructural loadA structural load or structural action is a mechanical load (more generally a force) applied to structural elements. A load causes stress, deformation, displacement or acceleration in a structure. Structural analysis, a discipline in engineering, analyzes the effects of loads on structures and structural elements. Excess load may cause structural failure, so this should be considered and controlled during the design of a structure.*As an Amazon Associate I earn from qualifying purchases.