Yield (engineering)In materials science and engineering, the yield point is the point on a stress–strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Below the yield point, a material will deform elastically and will return to its original shape when the applied stress is removed. Once the yield point is passed, some fraction of the deformation will be permanent and non-reversible and is known as plastic deformation.
Ultimate tensile strengthUltimate tensile strength (also called UTS, tensile strength, TS, ultimate strength or Ftu{\displaystyle F_{\text{tu}}} in notation) is the maximum stress that a material can withstand while being stretched or pulled before breaking. In brittle materials, the ultimate tensile strength is close to the yield point, whereas in ductile materials, the ultimate tensile strength can be higher.
DuctilityDuctility is the ability of a material to sustain significant plastic deformation before fracture when undergoing tension, i.e. when the relevant elastic modulus is Young's; the equivalent for deforming under bulk compression, i.e. when using the bulk modulus, is malleability. Historically, materials were considered malleable if they were amenable to forming by hammering or rolling. Lead is an example of a material which is substantially more malleable than ductile.
FractureFracture is the cracking or breaking into pieces of an object or material under the action of stress. The science of fracture is a field of study in physics, metallurgy and engineering. The fracture of a solid usually occurs due to the development of certain displacement discontinuity surfaces within the solid.
BucklingIn structural engineering, buckling is the sudden change in shape (deformation) of a structural component under load, such as the bowing of a column under compression or the wrinkling of a plate under shear. If a structure is subjected to a gradually increasing load, when the load reaches a critical level, a member may suddenly change shape and the structure and component is said to have buckled.
Mechanical engineeringMechanical engineering is the study of physical machines and mechanisms that may involve force and movement. It is an engineering branch that combines engineering physics and mathematics principles with materials science, to design, analyze, manufacture, and maintain mechanical systems. It is one of the oldest and broadest of the engineering branches.*As an Amazon Associate I earn from qualifying purchases.