TheInfoListRev V5.1.84
Xfr/
SummaryRelatedTreeNews

Related topics

Tracker action

Sponsored
Shop Amazon for electric kettles
Browse products on Amazon.
Search Amazon →
As an Amazon Associate I earn from qualifying purchases.

Mechanical linkage between keys and pipes in an organ Tracker action in Jørlunde church. Organ by Frobenius (2009) Tracker action is a term used in reference to pipe organs and steam calliopes to indicate a mechanical linkage between keys or pedals pressed by the organist and the valve that allows air to flow into pipe(s) of the corresponding note.

Tubular-pneumatic actionTubular-pneumatic action"Tubular-pneumatic action" refers to an apparatus used in many pipe organs built during the late 19th and early 20th centuries. The term "tubular" refers to the extensive use of lead tubing to connect the organ's console to the valves that control the delivery of "wind" (air under pressure) to the pipes. Many such organs are extant 100 or more years after their construction.Electro-pneumatic actionElectro-pneumatic actionThe electro-pneumatic action is a control system by the mean of air pressure for pipe organs, whereby air pressure, controlled by an electric current and operated by the keys of an organ console, opens and closes valves within wind chests, allowing the pipes to speak. This system also allows the console to be physically detached from the organ itself.Pipe organPipe organThe pipe organ is a musical instrument that produces sound by driving pressurised air (called wind) through the organ pipes selected from a keyboard. Because each pipe produces a single tone and pitch, the pipes are provided in sets called ranks, each of which has a common timbre, loudness (volume), and construction throughout the keyboard compass. In other words, a rank is a set of pipes all having the same tonal quality, but having a range of different pitches.Barker leverThe Barker lever is a pneumatic system which multiplies the force of a finger on the key of a tracker pipe organ. It employs the wind pressure of the organ to inflate small bellows called "pneumatics" to overcome the resistance of the pallets (valves) in the organ's wind-chest. This lever allowed for the development of larger, more powerful organs still responsive to the human hand.Direct electric actionDirect electric action is a system used in pipe organs to control the flow of air (wind) into the organ's pipes when the corresponding keys or pedals are depressed. In direct electric action, the valves beneath the pipes are opened directly by electro-magnet solenoids, while with electro-pneumatic action, the electro-magnet's action admits air into a pneumatic or small bellows which in turn operates the pipe's valve.Hydraulic actionHydraulic actionHydraulic action, most generally, is the ability of moving water (flowing or waves) to dislodge and transport rock particles. This includes a number of specific erosional processes, including abrasion, at facilitated erosion, such as static erosion where water leaches salts and floats off organic material from unconsolidated sediments, and from chemical erosion more often called chemical weathering.Organ stopOrgan stopAn organ stop is a component of a pipe organ that admits pressurized air (known as wind) to a set of organ pipes. Its name comes from the fact that stops can be used selectively by the organist; each can be "on" (admitting the passage of air to certain pipes), or "off" (stopping the passage of air to certain pipes). The term can also refer to the control that operates this mechanism, commonly called a stop tab, stop knob, or drawknob.HydraulophoneHydraulophoneA hydraulophone is a tonal acoustic musical instrument played by direct physical contact with water (sometimes other fluids) where sound is generated or affected hydraulically. The hydraulophone was described and named by Steve Mann in 2005, and patented in 2011. Typically, sound is produced by the same hydraulic fluid in contact with the player's fingers. It has been used as a sensory exploration device for low-vision individuals.Organ pipeOrgan pipeAn organ pipe is a sound-producing element of the pipe organ that resonates at a specific pitch when pressurized air (commonly referred to as wind) is driven through it. Each pipe is tuned to a note of the musical scale. A set of organ pipes of similar timbre comprising the complete scale is known as a rank; one or more ranks constitutes a stop.Water organWater organThe water organ or hydraulic organ (Greek: ὕδραυλις = ὕδωρ + αυλός / αυλη) (early types are sometimes called hydraulos, hydraulus or hydraula) is a type of pipe organ blown by air, where the power source pushing the air is derived by water from a natural source (e.g. by a waterfall) or by a manual pump. Consequently, the water organ lacks a bellows, blower, or compressor. The hydraulic organ is often confused with the hydraulis.Calliope (instrument)Calliope (instrument)A calliope (not to be confused with mechanical organs) (see below for pronunciation) is an American musical instrument that produces sound by sending a gas, originally steam or, more recently, compressed air, through large whistles—originally locomotive whistles. A calliope is typically very loud. Even some small calliopes are audible for miles. There is no way to vary tone or volume. Musically, the only expression possible is the pitch, rhythm, and duration of the notes.Classical period (music)Classical period (music)Common practice periodNew musicThe Classical period was an era of classical music between roughly 1750 and 1820. The classical period falls between the Baroque and Romantic periods. It is mainly homophonic, using a clear melody line over a subordinate chordal accompaniment, but counterpoint was by no means forgotten, especially in liturgical vocal music and, later in the period, secular instrumental music.

*As an Amazon Associate I earn from qualifying purchases.

AboutPrivacyContact

TheInfoList organizes topic information and links to original sources.

Loading topic…