TheInfoListRev V5.1.84
Xfr/
SummaryRelatedTreeNews

Related topics

Mid-range speaker

A mid-range speaker is a loudspeaker driver that reproduces sound in the frequency range from 200 to 2,000 Hz. Mid-range drivers are usually cone types or, less commonly, dome types, or compression horn drivers. The radiating diaphragm of a cone mid-range unit is a truncated cone, with a voice coil attached at the neck, along with the spider portion of the suspension, and with the cone surround at the wide end. Cone mid-range drivers typically resemble small woofers.

WooferWooferA woofer or bass speaker is a technical term for a loudspeakerdriver designed to produce low frequency and mid-frequency sounds, typically from 50 up to 2000 Hz. The name is from the onomatopoeic English word for a dog's deep bark, "woof" (in contrast to a tweeter, the name used for loudspeakers designed to reproduce high-frequency sounds, deriving from the shrill calls of birds, "tweets").LoudspeakerLoudspeakerA loudspeaker (commonly referred to as a speaker or, more fully, a speaker system) is a combination of one or more speaker drivers, an enclosure, and electrical connections (possibly including a crossover network). The speaker driver is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound. The driver is a linear motor connected to a diaphragm, which transmits the motor's movement to produce sound by moving air.Compression driverCompression driverA compression driver is a small specialized diaphragm loudspeaker which generates the sound in a horn loudspeaker. It is attached to an acoustic horn, a widening duct which serves to radiate the sound efficiently into the air. It works in a "compression" mode; the area of the loudspeaker diaphragm is significantly larger than the throat aperture of the horn so that it provides high sound pressures.AlloyAlloyAn alloy is a mixture of chemical elements of which in most cases at least one is a metallic element, although the word is also sometimes used for mixtures of elements; herein only metallic alloys are described. Metallic alloys often have properties that differ from those of the pure elements from which they are made.PolymerPolymerIUPAC definitionA polymer is a substance composed of macromolecules. A macromolecule is a molecule of high relative molecular mass, the structure of which essentially comprises the multiple repetition of units derived, actually or conceptually, from molecules of low relative molecular mass.PolypropylenePolypropylenePolypropylene (PP), also known as polypropene, is a thermoplasticpolymer used in a wide variety of applications. It is produced via chain-growth polymerization from the monomerpropylene. Polypropylene belongs to the group of polyolefins and is partially crystalline and non-polar. Its properties are similar to polyethylene, but it is slightly harder and more heat-resistant. It is a white, mechanically rugged material and has a high chemical resistance.TitaniumTitaniumTitanium is a chemical element; it has symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength that is resistant to corrosion in sea water, aqua regia, and chlorine. Titanium was discovered in Cornwall, Great Britain, by William Gregor in 1791 and was named by Martin Heinrich Klaproth after the Titans of Greek mythology.KevlarKevlarKevlar (para-aramid) is a strong, heat-resistant synthetic fiber, related to other aramids such as Nomex and Technora. Developed by Stephanie Kwolek at DuPont in 1965, the high-strength material was first used commercially in the early 1970s as a replacement for steel in racing tires. It is typically spun into ropes or fabric sheets that can be used as such, or as an ingredient in composite material components.PaperPaperPaper is a thin sheet of matted cellulosefibers. Largely derived from lignocellulose, paper is created from a pulp dissolved into a slurry that is drained and dried into sheets. Different types of paper are defined by constituent fiber, paper pulp, sizing, coating, paper size, paper density and grammage.ResinResinA resin is a highly viscous liquid or solid that can be converted into a polymer. Resins may be biological or synthetic in origin but are typically harvested from plants. Resins are mixtures of organic compounds insoluble in water, predominantly terpenes. Technically, resins should not be confused with gums, which consist predominantly of water-soluble polysaccharides, although the two terms are often interchangeable in the less formal context.AluminiumAluminiumB↑Al↓Gamagnesium ← aluminium → siliconMagnesiumMagnesiumBe↑Mg↓Casodium ← magnesium → aluminiumHertzHertzThe hertz (symbol: Hz) is the unit of frequency in the International System of Units (SI), often described as being equivalent to one event (or cycle) per second. The hertz is an SI derived unit whose formal expression in terms of SI base units is 1/s or s−1, meaning that one hertz is one per second or the reciprocal of one second. It is used only in the case of periodic events.

*As an Amazon Associate I earn from qualifying purchases.

AboutPrivacyContact

TheInfoList organizes topic information and links to original sources.

Loading topic…