TheInfoListRev V5.1.84
Xfr/
SummaryRelatedTreeNews

Related topics

In-ear monitor

An in-ear monitor (IEMs), in-ear, or colloquially earpiece is a listening device placed into the ear. More narrowly, the term in-ear monitor is defined as such a device used by musicians, audio engineers and audiophiles to listen to music or to hear a personal mix of vocals and stage instrumentation for live performance or recording studio mixing, often specifically in order to hear themselves through a sound system in real time.

Stage monitor systemStage monitor systemA stage monitor system is a set of performer-facing loudspeakers called monitor speakers, stage monitors, floor monitors, wedges, or foldbacks on stage during live music performances in which a sound reinforcement system is used to amplify a performance for the audience. The monitor system allows musicians to hear themselves and fellow band members clearly.Noise reductionNoise reductionNoise reduction is the process of removing noise from a signal. Noise reduction techniques exist for audio and images. Noise reduction algorithms may distort the signal to some degree. Noise rejection is the ability of a circuit to isolate an undesired signal component from the desired signal component, as with common-mode rejection ratio. All signal processing devices, both analog and digital, have traits that make them susceptible to noise.AudiophileAudiophileAn audiophile (from Latin: audīre, lit.'to hear' + Greek: φίλος, romanized: philos, lit.'loving') is a person who is enthusiastic about high-fidelitysound reproduction. An audiophile seeks to achieve high sound quality in the audio reproduction of recorded music, typically in a quiet listening space in a room with good acoustics.Audio engineerAudio engineerAn audio engineer (also known as a sound engineer or recording engineer) helps to produce a recording or a live performance, balancing and adjusting sound sources using equalization, dynamics processing and audio effects, mixing, reproduction, and reinforcement of sound. Audio engineers work on the "technical aspect of recording—the placing of microphones, pre-amp knobs, the setting of levels.Panning (audio)Panning is the distribution of an audio signal (either monaural or stereophonic pairs) into a new stereo or multi-channel sound field determined by a pan control setting. A typical recording console has a pan control for each incoming source channel. A pan control or pan pot (shorthand for panoramic potentiometer), is a control with a position indicator that can range continuously from the 7 o'clock when fully left to the 5 o'clock position fully right.Multitrack recordingMultitrack recordingMultitrack recording (MTR), also known as multitracking, is a method of sound recording developed in 1955 that allows for the separate recording of multiple sound sources or of sound sources recorded at different times to create a cohesive whole. Multitracking became possible in the mid-1950s when the idea of simultaneously recording different audio channels to separate discrete tracks on the same reel-to-reel tape was developed.Spill (audio)Spill (audio)Spill (also known as bleed and leakage) is the occurrence in sound recording (particularly in close miking) and live sound mixing whereby sound is picked up by a microphone from a source other than that which is intended. Spill is usually seen as a problem, and various steps are taken to avoid it or reduce it. In some styles of music, such as orchestral music, jazz, and blues, it is more likely to be accepted or even seen as desirable.Production truckProduction truckA television production truck or OB van is a small mobile production control room to allow filming of events and video production at locations outside a regular television studio. They are used for remote broadcasts, outside broadcasting (OB), and electronic field production (EFP).Recording studioRecording studioA recording studio is a specialized facility for recording and mixing of instrumental or vocal musical performances, spoken words, and other sounds. They range in size from a small in-home project studio large enough to record a single singer-guitarist, to a large building with space for a full orchestra of 100 or more musicians.MusicianMusicianA musician is someone who composes, conducts, or performsmusic, especially instrumental music. According to the United States Employment Service, "musician" is a general term used to designate a person who follows music as a profession. Musicians include songwriters, who write both music and lyrics for songs; conductors, who direct a musical performance; and performers, who perform for an audience.Stereophonic soundStereophonic soundStereophonic sound, commonly shortened to stereo, is a method of sound reproduction that recreates a multi-directional, three-dimensional audible perspective. This is usually achieved by using two independent audio channels through a configuration of two loudspeakers (or stereo headphones) in such a way as to create the impression of sound heard from various directions, as in natural hearing.ConcertConcertA concert, known informally as a gig or show, is a live performance of music in front of an audience. The performance may be carried by a single musician, in which case it is sometimes called a recital, or by a musical ensemble such as an orchestra, choir, or band.

*As an Amazon Associate I earn from qualifying purchases.

AboutPrivacyContact

TheInfoList organizes topic information and links to original sources.

Loading topic…