Western Kentucky University Heating PlantThe Western Kentucky University Heating Plant is a historic structure on the campus of Western Kentucky University. Constructed in 1927, it was added to the National Register of Historic Places on December 18, 1979.
District heatingCentralized heat distribution systemThe Spittelau incineration plant is one of several plants that provide district heating in Vienna, Austria.Animated image showing how district heating worksDistrict heating (also known as heat networks) is a system for distributing heat generated in a centralized location through a system of insulated pipes for residential and commercial heating requirements such as space heating and water heating.Heating plant and main controls cabin, FlorenceThe Heating plant and main controls cabin is a technical facilities building in Firenze Santa Maria Novella railway station designed by architect Angiolo Mazzoni in 1929. The complex has been called "the greatest masterpiece of Futurist-Constructivist-Modernist architecture".
Central Heating PlantThe Central Heating Plant is a power station located at 325 13th Street, SW in the Southwest Federal Center neighborhood of Washington, D.C. which serves most of the United States federal government buildings near the National Mall. BackgroundOperated by the General Services Administration, it was designed by architect Paul Philippe Cret in 1933. At the time of its construction it was the largest such heating facility in the United States and served 22 federal buildings.
BoilerA boiler is a closed vessel in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, central heating, boiler-based power generation, cooking, and sanitation. Heat sourcesIn a fossil fuel power plant using a steam cycle for power generation, the primary heat source will be combustion of coal, oil, or natural gas.
Water-tube boilerA high pressure watertube boiler (also spelled water-tube and water tube) is a type of boiler in which water circulates in tubes heated externally by fire. Fuel is burned inside the furnace, creating hot gas which boils water in the steam-generating tubes. In smaller boilers, additional generating tubes are separate in the furnace, while larger utility boilers rely on the water-filled tubes that make up the walls of the furnace to generate steam.
Thermal power stationA thermal power station, also known as a thermal power plant, is a type of power station in which the heat energy generated from various fuel sources (e.g., coal, natural gas, nuclear fuel, etc.) is converted to electrical energy. The heat from the source is converted into mechanical energy using a thermodynamic power cycle (such as a Diesel cycle, Rankine cycle, Brayton cycle, etc.).
Thermal energyThe term "thermal energy" is often used ambiguously in physics and engineering. It can denote several different physical concepts, including: Internal energy: The energy contained within a body of matter or radiation, excluding the potential energy of the whole system. Heat: Energy in transfer between a system and its surroundings by mechanisms other than thermodynamic work and transfer of matter.
Fire-tube boilerA fire-tube boiler is a type of boiler invented in 1828 by Marc Seguin, in which hot gases pass from a fire through one or more tubes running through a sealed container of water. The heat of the gases is transferred through the walls of the tubes by thermal conduction, heating the water and ultimately creating steam.
SteamSteam is water vapor, often mixed with air and/or an aerosol of liquid water droplets. This may occur by evaporation or by boiling, where heat is applied until water reaches the enthalpy of vaporization. Superheated or saturated steam is invisible; however, wet steam, a visible mist or aerosol of water droplets, is often referred to as "steam".
Electricity generationElectricity generation is the process of generating electric power from sources of primary energy. For utilities in the electric power industry, it is the stage prior to its delivery (transmission, distribution, etc.) to end users or its storage, using for example, the pumped-storage method. Consumable electricity is not freely available in nature, so it must be "produced", transforming other forms of energy to electricity.
CogenerationCogeneration or combined heat and power (CHP) is the use of a heat engine or power station to generate electricity and useful heat at the same time. Cogeneration is a more efficient use of fuel or heat, because otherwise-wasted heat from electricity generation is put to some productive use. Combined heat and power (CHP) plants recover otherwise wasted thermal energy for heating. This is also called combined heat and power district heating.*As an Amazon Associate I earn from qualifying purchases.