FiltrationFiltration is a physical separation process that separates solid matter and fluid from a mixture using a filter medium that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter medium are described as oversize and the fluid that passes through is called the filtrate.
Activated carbonActivated carbon, also called activated charcoal, is a form of carbon commonly used to filter contaminants from water and air, among many other uses. It is processed (activated) to have small, low-volume pores that greatly increase the surface area available for adsorption or chemical reactions. (Adsorption, not to be confused with absorption, is a process where atoms or molecules adhere to a surface). The pores can be thought of as a microscopic "sponge" structure.
Diatomaceous earthDiatomaceous earth ( ), also known as diatomite ( ), celite, or kieselgur, is a naturally occurring, soft, siliceoussedimentary rock that can be crumbled into a fine white to off-white powder. It has a particle size ranging from more than 3 mm to less than 1 μm, but typically 10 to 200 μm. Depending on the granularity, this powder can have an abrasive feel, like that of pumice powder, and has a low density as a result of its high porosity.
Cross-flow filtrationIn chemical engineering, biochemical engineering and protein purification, cross-flow filtration (also known as tangential flow filtration) is a type of filtration (a particular unit operation). Cross-flow filtration is different from dead-end filtration in which the feed is passed through a membrane or bed, the solids being trapped in the filter and the filtrate being released at the other end.
Drag (physics)In fluid dynamics, drag, sometimes referred to as fluid resistance, and also known as viscous force, is a force acting opposite to the direction of motion of any object moving with respect to a surrounding fluid. This can exist between two fluid layers, or between a fluid and a solid surface. Drag forces tend to decrease fluid velocity relative to the solid object in the fluid's path. Unlike other resistive forces, drag force depends on velocity.
Particulate matterMicroscopic solid or liquid matter suspended in the Earth's atmospherePM2.5 and PM10 compared with a human hair in a graphic from the Environmental Protection Agency
Filter pressAn industrial filter press is a tool used in separation processes, specifically to separate solids and liquids. The machine stacks many filter elements and allows the filter to be easily opened to remove the filtered solids, and allows easy cleaning or replacement of the filter media. Filter presses cannot be operated in a continuous process but can offer very high performance, particularly when low residual liquid in the solid is desired.
Rotary vacuum-drum filterA Rotary Vacuum Filter Drum consists of a cylindrical filter membrane that is partly sub-merged in a slurry to be filtered. The inside of the drum is held lower than the ambient pressure. As the drum rotates through the slurry, the liquid is sucked through the membrane, leaving solids to cake on the membrane surface while the drum is submerged. A knife or blade is positioned to scrape the product from the surface.
Substance (chemistry)In chemistry, a substance is a unique form of matter with constant chemical composition and characteristic properties. Chemical substances may take the form of a single element or chemical compounds. If two or more chemical substances can be combined without reacting, they may form a chemical mixture. If a mixture is separated to isolate one chemical substance to a desired degree, the resulting substance is said to be chemically pure.ElectrofiltrationElectrofiltration is a method that combines membrane filtration and electrophoresis in a dead-end process. Electrofiltration is regarded as an appropriate technique for concentration and fractionation of biopolymers. The film formation on the filter membrane which hinders filtration can be minimized or completely avoided by the application of electric field, improving filtration’s performance and increasing selectivity in case of fractionation.
MicrofiltrationMicrofiltration is a type of physical filtration process where a contaminated fluid is passed through a special pore-sizedmembrane filter to separate microorganisms and suspended particles from process liquid. It is commonly used in conjunction with various other separation processes such as ultrafiltration and reverse osmosis to provide a product stream which is free of undesired contaminants.*As an Amazon Associate I earn from qualifying purchases.