MOSFETType of field-effect transistorTwo power MOSFETs in D2PAKsurface-mount packages.
JFETThe junction field-effect transistor (JFET) is one of the simplest types of field-effect transistor. JFETs are three-terminal semiconductor devices that can be used as electronically controlled switches or resistors, or to build amplifiers. Unlike bipolar junction transistors, JFETs are exclusively voltage-controlled in that they do not need a biasing current. Electric charge flows through a semiconducting channel between source and drainterminals.
SemiconductorA semiconductor is a material with electrical conductivity between that of a conductor and an insulator. Its conductivity can be modified by adding impurities ("doping") to its crystal structure. When two regions with different doping levels are present in the same crystal, they form a semiconductor junction.Charge carrierIn solid state physics, a charge carrier is a particle or quasiparticle that is free to move, carrying an electric charge, especially the particles that carry electric charges in electrical conductors. Examples are electrons, ions and holes. In a conducting medium, an electric field can exert force on these free particles, causing a net motion of the particles through the medium; this is what constitutes an electric current.
TransistorA transistor is a semiconductor device used to amplify or switch electrical signals and power. It is one of the basic building blocks of modern electronics. It is composed of semiconductor material, usually with at least three terminals for connection to an electronic circuit. A voltage or current applied to one pair of the transistor's terminals controls the current through another pair of terminals.
Electron holeIn physics, chemistry, and electronic engineering, an electron hole (often simply called a hole) is a quasiparticle denoting the lack of an electron at a position where one could exist in an atom or atomic lattice. Since in a normal atom or crystal lattice the negative charge of the electrons is balanced by the positive charge of the atomic nuclei, the absence of an electron leaves a net positive charge at the hole's location.
Electric currentAn electric current is a flow of charged particles, such as electrons or ions, through an electrical conductor or space. It is defined as the net rate at which electric charge flows through a surface. The moving particles are called charge carriers, which may be of several types, depending on the conductor. In electric circuits, the charge carriers are often electrons moving through a wire. In semiconductors, the charge carriers can be electrons or holes.
ElectronThe electron (e, or β in nuclear reactions) is a subatomic particle whose electric charge is negative one elementary charge. It is an elementary particle contained in the matter that makes up the universe. All atoms are composed of electrons, as well as varying numbers protons and neutrons, but the electrons have almost 2,000 times less mass than the other two constituents.
VoltageVoltage, also known as (electrical) potential difference, electric pressure, or electric tension, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to move a positive test charge from the first point to the second point. In the International System of Units (SI), the derived unit for voltage is the volt (V).
Electric fieldPhysical field surrounding an electric chargeAn electric field (sometimes called E-field) is a physical field that surrounds electrically charged particles such as electrons. In classical electromagnetism, the electric field of a single charge (or group of charges) describes their capacity to exert attractive or repulsive forces on another charged object.High impedanceIn electronics, high impedance means that an electrical contact point in a circuit (a node) allows a relatively small amount of current through, per unit of voltage applied to that point. High impedance circuits show low current for (possibly) high voltage, whereas low impedance circuits are the opposite: they show low voltage for (possibly) high current. Values for electrical impedance are measured in units of Ohms (Ω), similar to resistance.
Electrical resistivity and conductivityElectrical resistivity (also called volume resistivity or specific electrical resistance) is a fundamental specific property of a material that measures its electrical resistance or how strongly it resists electric current. A low resistivity indicates a material that readily allows electric current. Resistivity is commonly represented by the Greek letterρ (rho). The SI unit of electrical resistivity is the ohm-metre (Ω⋅m).*As an Amazon Associate I earn from qualifying purchases.