TheInfoListRev V5.1.84
Xfr/
SummaryRelatedTreeNews

Related topics

Exposure (photography)

In photography, exposure is the amount of light per unit area reaching a frame of photographic film or the surface of an electronic image sensor. It is determined by exposure time, lens f-number, and scene luminance. Exposure is measured in units of lux-seconds (symbol lx⋅s), and can be computed from exposure value (EV) and scene luminance in a specified region. An "exposure" is a single shutter cycle.

Shutter speedShutter speedIn photography, shutter speed or exposure time is the length of time that the film or digital sensor inside the camera is exposed to light (that is, when the camera's shutter is open) when taking a photograph. The amount of light that reaches the film or image sensor is proportional to the exposure time. 1⁄500 of a second will let half as much light in as 1⁄250.Image sensorImage sensorAn image sensor or imager is a sensor used for imaging. It detects and conveys information used to form an image. It does so by converting the variable attenuation of light waves (as they pass through or reflect off objects) into signals, small bursts of current that convey the information. The waves can be light or other electromagnetic radiation.LuminanceLuminanceLuminance is a photometric measure of the luminous intensity per unit area of light travelling in a given direction. It describes the amount of light that passes through, is emitted from, or is reflected from a particular area, and falls within a given solid angle. The procedure for conversion from spectral radiance to luminance is standardized by the CIE and ISO.PhotographyPhotographyPhotography of Sierra NevadaPhotography is the art, application, and practice of creating images by recording light, either electronically by means of an image sensor, or chemically by means of a light-sensitive material such as photographic film. It is employed in many fields of science, manufacturing (e.g., photolithography), and business, as well as its more direct uses for art, film and video production, recreational purposes, hobby, and mass communication.F-numberF-numberDiagram of decreasing apertures, that is, increasing f-numbers, in one-stop increments; each aperture has half the light-gathering area of the previous one.An f-number is a measure of the light-gathering ability of an optical system such as a camera lens. It is defined as the ratio of the system's focal length to the diameter of the entrance pupil ("clear aperture").LightLightLight, visible light, or visible radiation is electromagnetic radiation that can be perceived by the human eye. Visible light spans the visible spectrum and is usually defined as having wavelengths in the range of 400–700 nanometers (nm), corresponding to frequencies of 750–420 terahertz.Photographic filmPhotographic filmPhotographic film is a strip or sheet of transparent film base coated on one side with a gelatinemulsion containing microscopically small light-sensitive silver halide crystals, for the purpose of taking photographs. The sizes and other characteristics of the crystals determine the sensitivity, contrast, and resolution of the film. Film is typically segmented in frames, which give rise to separate photographs.SecondSecondThe second (symbol: s) is a unit of time derived from the division of the day, first into 24 hours, then into 60 minutes, and lastly into 60 seconds, for a total of 24 × 60 × 60 = 86400 seconds per day. That definition, based on 1⁄86400 of a rotation of the Earth, is still used by the Universal Time 1 (UT1) system. The current and formal definition in the International System of Units (SI) is more precise:The second [...]LuxLuxThe lux (symbol: lx) is the unit of illuminance, or luminous flux per unit area, in the International System of Units (SI). It is equal to one lumen per square metre. In photometry, this is used as a measure of the irradiance, as perceived by the spectrally unequally responding human eye, of light that hits or passes through a surface.AreaAreaArea is the measure of a region's size on a surface. The area of a plane region or plane area refers to the area of a shape or planar lamina, while surface area refers to the area of an open surface or the boundary of a three-dimensional object. Area can be understood as the amount of material with a given thickness that would be necessary to fashion a model of the shape, or the amount of paint necessary to cover the surface with a single coat.Unit of measurementUnit of measurementA unit of measurement, or unit of measure, is a definite magnitude of a quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same kind of quantity. Any other quantity of that kind can be expressed as a multiple of the unit of measurement, For example, a length is a physical quantity. The metre (symbol: m) is a unit of length that represents a definite predetermined length.

*As an Amazon Associate I earn from qualifying purchases.

AboutPrivacyContact

TheInfoList organizes topic information and links to original sources.

Loading topic…