Electric power distributionElectric power distribution is the final stage in the delivery of electricity. Electricity is carried from the transmission system to individual consumers. Distribution substations connect to the transmission system and lower the transmission voltage to medium voltage ranging between 600 V and 35 kV with the use of transformers. Primary distribution lines carry this medium voltage power to distribution transformers located near the customer's premises.
Direct currentDirect current (DC) is one-directional flow of electric charge. An electrochemical cell is a prime example of DC power. Direct current may flow through a conductor such as a wire, but can also flow through semiconductors, insulators, or even through a vacuum as in electron or ion beams. The electric current flows in a constant direction, distinguishing it from alternating current (AC). A term formerly used for this type of current was galvanic current.
VoltageVoltage, also known as (electrical) potential difference, electric pressure, or electric tension, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to move a positive test charge from the first point to the second point. In the International System of Units (SI), the derived unit for voltage is the volt (V).
SubstationA substation is a part of an electrical generation, transmission, and distribution system. Substations transform voltage from high to low, or the reverse, or perform any of several other important functions. Between the generating station and the consumer, electric power may flow through several substations at different voltage levels.
Alternating currentAlternating current (AC) is an electric current that periodically reverses direction and changes its magnitude continuously with time, in contrast to direct current (DC), which flows only in one direction. Alternating current is the form in which electric power is delivered to businesses and residences, and it is the form of electrical energy that consumers typically use when they plug kitchen appliances, televisions, fans and electric lamps into a wall socket.
TransformerDevice to couple energy between circuitsIn electrical engineering, a transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any coil of the transformer produces a varying magnetic flux in the transformer's core, which induces a varying electromotive force (EMF) across any other coils wound around the same core.
Electric currentAn electric current is a flow of charged particles, such as electrons or ions, through an electrical conductor or space. It is defined as the net rate at which electric charge flows through a surface. The moving particles are called charge carriers, which may be of several types, depending on the conductor. In electric circuits, the charge carriers are often electrons moving through a wire. In semiconductors, the charge carriers can be electrons or holes.
Electrical gridAn electrical grid (or electricity network) is an interconnected network for electricity delivery from producers to consumers. Electrical grids consist of power stations, electrical substations to step voltage up or down, electric power transmission to carry power over long distances, and finally electric power distribution to customers. In that last step, voltage is stepped down again to the required service voltage.
Electricity deliveryElectricity delivery is the process that starts after generation of electricity in the power station, up to the use by the consumer.Electrical energyElectrical energy is the energy transferred as electric charges move between points with different electric potential, that is, as they move across a potential difference. As electric potential is lost or gained, work is done changing the energy of some system. The amount of work in joules is given by the product of the charge that has moved, in coulombs, and the potential difference that has been crossed, in volts.
Power stationA power station, also referred to as a power plant and sometimes generating station or generating plant, is an industrial facility for the generation of electric power. Power stations are generally connected to an electrical grid. Many power stations contain one or more generators, rotating machines that convert mechanical power into three-phase electric power. The relative motion between a magnetic field and a conductor creates an electric current.
Electricity generationElectricity generation is the process of generating electric power from sources of primary energy. For utilities in the electric power industry, it is the stage prior to its delivery (transmission, distribution, etc.) to end users or its storage, using for example, the pumped-storage method. Consumable electricity is not freely available in nature, so it must be "produced", transforming other forms of energy to electricity.
grid electricityRelated word or term.*As an Amazon Associate I earn from qualifying purchases.