Redundancy (engineering)In engineering and systems theory, redundancy is the intentional duplication of critical components or functions of a system with the goal of increasing reliability of the system, usually in the form of a backup or fail-safe, or to improve actual system performance, such as in the case of GNSS receivers, or multi-threaded computer processing.
Triple modular redundancyIn computing, triple modular redundancy, sometimes called triple-mode redundancy, (TMR) is a fault-tolerant form of N-modular redundancy, in which three systems perform a process and that result is processed by a majority-voting system to produce a single output. If any one of the three systems fails, the other two systems can correct and mask the fault.
Lockstep (computing)Lockstep systems are fault-tolerant computer systems that run the same set of operations at the same time in parallel.
Fault toleranceFault tolerance is the ability of a system to contain the propagation of faults (e.g. failed transistor, shorted connector, intermittent data bus). Faults may manifest as errors (e.g. bad data value, missing message) causing incorrect system state. Failure tolerant systems mask errors and maintain failure-free operation in the presence of one or more faulty components. This capability is essential for high-availability, mission-critical, or even life-critical systems.
Reliability engineeringSub-discipline of systems engineering that emphasizes dependabilityReliability engineering is a sub-discipline of systems engineering that emphasizes the ability of equipment to function without failure. Reliability is defined as the probability that a product, system, or service will perform its intended function adequately for a specified period of time; or will operate in a defined environment without failure.
Marine chronometerA marine chronometer is a precision timepiece that is carried on a ship and employed in the determination of the ship's position by celestial navigation. It is used to determine longitude by comparing Greenwich Mean Time (GMT) and the time at the current location found from observations of celestial bodies.
Error detection and correctionIn information theory and coding theory with applications in computer science and telecommunications, error detection and correction (EDAC) or error control are techniques that enable reliable delivery of digital data over unreliable communication channels. Many communication channels are subject to channel noise, and thus errors may be introduced during transmission from the source to a receiver.*As an Amazon Associate I earn from qualifying purchases.