Taxonomy
There are five major components within XidML – parameters, instruments, packages, links and algorithms – each with their own subset of metadata.Parameters
Parameters describe all there is to know about a value being measured. Examples of the type of metadata associated with a parameter include *Name: uniquely identifies the parameter *DataFormat: format used to encode the sampled data - examples include Offset Binary and Binary Coded Decimal *Unit: unit of measurement of the parameter (expressed relative to SI units) *LongDescription: detailed description of a parameter *ShortDescription: brief description of the parameter *SizeInBits: number of bits used to encode the sampled data It is also possible to decompose a parameter into sub-parameters and to describe the meaning of each sub-parameter. For example, a 48-bit IRIG time parameter is typically broken up into High, Low and Micro time components.Instruments
Instruments are the physical hardware used in data acquisition and describe how FTI devices are configured. All instruments share the following common metadata: *Name: uniquely identifies the parameter *Manufacturer: identifies the device manufacturer *PartReference: uniquely identifies the type of device *SerialNumber: uniquely identifies a specific deviceDevice configuration
Device configuration is described using zero or more settings. Settings are those values that affect the behavior of a device in an acquisition network. Settings consist of *Name: This is the name of the setting. Device vendors publish the allowed values for settings using XdefML. Examples of settings include Filter Cutoff and Excitation Amplitude *Value: This is the value associated with setting. Device vendors publish the allowed values and other value constraints using XdefML.Packages
Packages describe how data is transmitted or stored. All packages must have globally unique names. Examples of transmission packages include IRIG-106 Chapter 4 PCM frame definitions,External links
Links describe the physical connections between instruments. Examples of Links include an Ethernet connection between two networked devices and an RF link between an aircraft and a ground-station card in a PC. All links have a globally unique name. *Name: uniquely identifies a link *Type: defines the type of link e.g. Ethernet (an Ethernet connection) and ARINC-429 (a connection to an ARINC-429 bus) *Packages: describes what packages are being transmitted on a link in addition to the sequencing of this data on a link (optional)Algorithms
Algorithms describe how data is processed. Examples include polynomials used to linearize data and an algorithm used to extract a sub-set of bits from a parameter before transmission. All algorithms have a globally unique name. *Name: uniquely identifies an algorithm *Inputs: input parameters to an algorithm *Outputs: parameters output by an algorithm The semantics of how an algorithm processes and generates data is described in the body of the algorithm.Origins
The use of XML has become increasingly common in the flight test industry as a means of automating translation tasks and facilitating interoperability between systems.Guenter Meuller, “Handling of Data and Meta-data in Flight Test”, ETTC Proceedings, 2006 XidML was created with the aim of addressing the specific requirements encountered in aerospace applications. A XidML committee ensure vendor independence and ensures XidML remains relevant into the future.Revisions
XidML has undergone a number of revisions in response to community feedback and requirements. It is currently at version 3.0.0 which introduced several major changes since version 2.4. These include fewer schemas for simplification, to make it easier to process by software and reduce the likelihood of future changes to the schema. Additionally, an optional complementary schema called XdefML has been added that facilitates instrument set-up and validation.References
{{ReflistExternal links