Wavelet For Multidimensional Signals Analysis

Wavelets are often used to analyse piece-wise smooth signals. Wavelet coefficients can efficiently represent a signal which has led to data compression algorithms using wavelets. Wavelet analysis is extended for multidimensional signal processing as well. This article introduces a few methods for wavelet synthesis and analysis for multidimensional signals. There also occur challenges such as directivity in multidimensional case.

Multidimensional separable discrete wavelet transform (DWT)

The discrete wavelet transform is extended to the multidimensional case using the tensor product of well known 1-D wavelets.
In 2-D for example, the tensor product space for 2-D is decomposed into four tensor product vector spaces as

This leads to the concept of multidimensional separable DWT similar in principle to the multidimensional DFT.

gives the approximation coefficients and other subbands:

low-high (LH) subband,

high-low (HL) subband,

high-high (HH) subband,

give detail coefficients.

Implementation of multidimensional separable DWT

Wavelet coefficients can be computed by passing the signal to be decomposed though a series of filters. In the case of 1-D, there are two filters at every level-one low pass for approximation and one high pass for the details. In the multidimensional case, the number of filters at each level depends on the number of tensor product vector spaces. For M-D, filters are necessary at every level. Each of these is called a subband. The subband with all low pass (LLL...) gives the approximation coefficients and all the rest give the detail coefficients at that level.
For example, for and a signal of size , a separable DWT can be implemented as follows:

Applying the 1-D DWT analysis filterbank in dimension , it is now split into two chunks of size . Applying 1-D DWT in dimension, each of these chunks is split into two more chunks of . This repeated in 3-D gives a total of 8 chunks of size .

Disadvantages of M-D separable DWT

The wavelets generated by the separable DWT procedure are highly shift variant. A small shift in the input signal changes the wavelet coefficients to a large extent. Also, these wavelets are almost equal in their magnitude in all directions and thus do not reflect the orientation or directivity that could be present in the multidimensional signal. For example, there could be an edge discontinuity in an image or an object moving smoothly along a straight line in the space-time 4D dimension. A separable DWT does not fully capture the same.
In order to overcome these difficulties, a method of wavelet transform called Complex wavelet transform (CWT) was developed.

Multidimensional complex wavelet transform

Similar to the 1-D complex wavelet transform, tensor products of complex wavelets are considered to produce complex wavelets for multidimensional signal analysis. With further analysis it is seen that these complex wavelets are oriented. This sort of orientation helps to resolve the directional ambiguity of the signal.

Implementation of multidimensional (M-D) dual tree CWT

Dual tree CWT in 1-D uses 2 real DWTs, where the first one gives the real part of CWT and the second DWT gives the imaginary part of the CWT. M-D dual tree CWT is analyzed in terms of tensor products. However, it is possible to implement M-D CWTs efficiently using separable M-D DWTs and considering sum and difference of subbands obtained. Additionally, these wavelets tend to be oriented in specific directions.

Two types of oriented M-D CWTs can be implemented. Considering only the real part of the tensor product of wavelets, real coefficients are obtained. All wavelets are oriented in different directions. This is 2^m times as expansive where m is the dimensions.

If both real and imaginary parts of the tensor products of complex wavelets are considered, complex oriented dual tree CWT which is 2 times more expansive than real oriented dual tree CWT is obtained. So there are two wavelets oriented in each of the directions.
Although implementing complex oriented dual tree structure takes more resources, it is used in order to ensure an approximate shift invariance property that a complex analytical wavelet can provide in 1-D. In the 1-D case, it is required that the real part of the wavelet and the imaginary part are Hilbert transform pairs for the wavelet to be analytical and to exhibit shift invariance. Similarly in the M-D case, the real and imaginary parts of tensor products are made to be approximate Hilbert transform pairs in order to be analytic and shift invariant.

Consider an example for 2-D dual tree real oriented CWT:

Let and be complex wavelets:

and .

The support of the Fourier spectrum of the wavelet above resides in the first quadrant. When just the real part is considered, has support on opposite quadrants (see (a) in figure). Both and correspond to the HH subband of two different separable 2-D DWTs. This wavelet is oriented at .

Similarly, by considering , a wavelet oriented at is obtained. To obtain 4 more oriented real wavelets, , , and are considered.

The implementation of complex oriented dual tree structure is done as follows: Two separable 2-D DWTs are implemented in parallel using the filterbank structure as in the previous section. Then, the appropriate sum and difference of different subbands (LL, LH, HL, HH) give oriented wavelets, a total of 6 in all.

Similarly, in 3-D, 4 separable 3-D DWTs in parallel are needed and a total of 28 oriented wavelets are obtained.

Disadvantage of M-D CWT

Although the M-D CWT provides one with oriented wavelets, these orientations are only appropriate to represent the orientation along the (m-1)^th dimension of a signal with dimensions. When singularities in manifold of lower dimensions are considered, such as a bee moving in a straight line in the 4-D space-time, oriented wavelets that are smooth in the direction of the manifold and change rapidly in the direction normal to it are needed. A new transform, Hypercomplex Wavelet transform was developed in order to address this issue.

Hypercomplex wavelet transform

The dual tree hypercomplex wavelet transform (HWT) developed in consists of a standard DWT tensor and wavelets obtained from combining the 1-D Hilbert transform of these wavelets along the n-coordinates. In particular a 2-D HWT consists of the standard 2-D separable DWT tensor and three additional components:

For the 2-D case, this is named dual tree quaternion wavelet transform (QWT).
The total redundancy in M-D is tight frame.

Directional hypercomplex wavelet transform

The hypercomplex transform described above serves as a building block to construct the directional hypercomplex wavelet transform (DHWT). A linear combination of the wavelets obtained using the hypercomplex transform give a wavelet oriented in a particular direction. For the 2-D DHWT, it is seen that these linear combinations correspond to the exact 2-D dual tree CWT case.
For 3-D, the DHWT can be considered in two dimensions, one DHWT for and another for . For , , so, as in the 2-D case, this corresponds to 3-D dual tree CWT. But the case of gives rise to a new DHWT transform. The combination of 3-D HWT wavelets is done in a manner to ensure that the resultant wavelet is lowpass along 1-D and bandpass along 2-D.
In, this was used to detect line singularities in 3-D space.

Challenges ahead

The wavelet transforms for multidimensional signals are often computationally challenging which is the case with most multidimensional signals. Also, the methods of CWT and DHWT are redundant even though they offer directivity and shift invariance.

References

{{Reflist

External links

Tensor products in wavelet settingsA Panorama on Multiscale Geometric Representations, Intertwining Spatial, Directional and Frequency Selectivity
a review on 2D (two-dimensional) wavelet representations

Multidimensional signal processing
Wavelets