A square wave is a
non-sinusoidal periodic waveform in which the amplitude alternates at a steady
frequency
Frequency is the number of occurrences of a repeating event per unit of time. It is also occasionally referred to as ''temporal frequency'' for clarity, and is distinct from '' angular frequency''. Frequency is measured in hertz (Hz) which is ...
between fixed minimum and maximum values, with the same duration at minimum and maximum. In an ideal square wave, the transitions between minimum and maximum are instantaneous.
The square wave is a special case of a
pulse wave which allows arbitrary durations at minimum and maximum amplitudes. The ratio of the high period to the total period of a pulse wave is called the
duty cycle. A true square wave has a 50% duty cycle (equal high and low periods).
Square waves are often encountered in
electronics
The field of electronics is a branch of physics and electrical engineering that deals with the emission, behaviour and effects of electrons using electronic devices. Electronics uses active devices to control electron flow by amplification ...
and
signal processing
Signal processing is an electrical engineering subfield that focuses on analyzing, modifying and synthesizing '' signals'', such as sound, images, and scientific measurements. Signal processing techniques are used to optimize transmissions, ...
, particularly
digital electronics
Digital electronics is a field of electronics involving the study of digital signals and the engineering of devices that use or produce them. This is in contrast to analog electronics and analog signals.
Digital electronic circuits are usual ...
and
digital signal processing
Digital signal processing (DSP) is the use of digital processing, such as by computers or more specialized digital signal processors, to perform a wide variety of signal processing operations. The digital signals processed in this manner ar ...
. Its
stochastic counterpart is a
two-state trajectory.
Origin and uses
Square waves are universally encountered in
digital switching circuits and are naturally generated by binary (two-level) logic devices. Square waves are typically generated by
metal–oxide–semiconductor field-effect transistor (MOSFET) devices due to their rapid on–off
electronic switching behavior, in contrast to
bipolar junction transistor
A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers. In contrast, a unipolar transistor, such as a field-effect transistor, uses only one kind of charge carrier. A bipola ...
s (BJTs) which slowly generate signals more closely resembling
sine waves rather than square waves.
Square waves are used as timing references or "
clock signal
In electronics and especially synchronous digital circuits, a clock signal (historically also known as ''logic beat'') oscillates between a high and a low state and is used like a metronome to coordinate actions of digital circuits.
A clock s ...
s", because their fast transitions are suitable for triggering
synchronous logic
In digital electronics, a synchronous circuit is a digital circuit in which the changes in the state of memory elements are synchronized by a clock signal. In a sequential digital logic circuit, data are stored in memory devices called flip-fl ...
circuits at precisely determined intervals. However, as the frequency-domain graph shows, square waves contain a wide range of harmonics; these can generate
electromagnetic radiation
In physics, electromagnetic radiation (EMR) consists of waves of the electromagnetic (EM) field, which propagate through space and carry momentum and electromagnetic radiant energy. It includes radio waves, microwaves, infrared, (visible ...
or pulses of current that interfere with other nearby circuits, causing
noise
Noise is unwanted sound considered unpleasant, loud or disruptive to hearing. From a physics standpoint, there is no distinction between noise and desired sound, as both are vibrations through a medium, such as air or water. The difference aris ...
or errors. To avoid this problem in very sensitive circuits such as precision
analog-to-digital converters,
sine waves are used instead of square waves as timing references.
In musical terms, they are often described as sounding hollow, and are therefore used as the basis for
wind instrument
A wind instrument is a musical instrument that contains some type of resonator (usually a tube) in which a column of air is set into vibration by the player blowing into (or over) a mouthpiece set at or near the end of the resonator. The pitc ...
sounds created using
subtractive synthesis. Additionally, the distortion effect used on
electric guitar
An electric guitar is a guitar that requires external amplification in order to be heard at typical performance volumes, unlike a standard acoustic guitar (however combinations of the two - a semi-acoustic guitar and an electric acoustic gu ...
s clips the outermost regions of the waveform, causing it to increasingly resemble a square wave as more distortion is applied.
Simple two-level
Rademacher functions are square waves.
Definitions
The square wave in mathematics has many definitions, which are equivalent except at the discontinuities:
It can be defined as simply the
sign function of a sinusoid:
which will be 1 when the sinusoid is positive, −1 when the sinusoid is negative, and 0 at the discontinuities. Here, ''T'' is the
period of the square wave and ''f'' is its frequency, which are related by the equation ''f'' = 1/''T''.
A square wave can also be defined with respect to the
Heaviside step function ''u''(''t'') or the
rectangular function Π(''t''):
A square wave can also be generated using the
floor function directly:
and indirectly:
Fourier analysis

Using
Fourier expansion with cycle frequency over time , an ideal square wave with an amplitude of 1 can be represented as an infinite sum of sinusoidal waves:
The ideal square wave contains only components of odd-integer
harmonic frequencies (of the form ).
Sawtooth waves and real-world signals contain all integer harmonics.
A curiosity of the convergence of the
Fourier series
A Fourier series () is a summation of harmonically related sinusoidal functions, also known as components or harmonics. The result of the summation is a periodic function whose functional form is determined by the choices of cycle length (or '' ...
representation of the square wave is the
Gibbs phenomenon.
Ringing artifacts in non-ideal square waves can be shown to be related to this phenomenon. The Gibbs phenomenon can be prevented by the use of
σ-approximation, which uses the
Lanczos sigma factors to help the sequence converge more smoothly.
An ideal mathematical square wave changes between the high and the low state instantaneously, and without under- or over-shooting. This is impossible to achieve in physical systems, as it would require infinite
bandwidth.

Square waves in physical systems have only finite bandwidth and often exhibit
ringing effects similar to those of the Gibbs phenomenon or ripple effects similar to those of the σ-approximation.
For a reasonable approximation to the square-wave shape, at least the fundamental and third harmonic need to be present, with the fifth harmonic being desirable. These bandwidth requirements are important in digital electronics, where finite-bandwidth analog approximations to square-wave-like waveforms are used. (The ringing transients are an important electronic consideration here, as they may go beyond the electrical rating limits of a circuit or cause a badly positioned threshold to be crossed multiple times.)
Characteristics of imperfect square waves
As already mentioned, an ideal square wave has instantaneous transitions between the high and low levels. In practice, this is never achieved because of physical limitations of the system that generates the waveform. The times taken for the signal to rise from the low level to the high level and back again are called the ''
rise time'' and the ''
fall time'' respectively.
If the system is
overdamped, then the waveform may never actually reach the theoretical high and low levels, and if the system is underdamped, it will oscillate about the high and low levels before settling down. In these cases, the rise and fall times are measured between specified intermediate levels, such as 5% and 95%, or 10% and 90%. The
bandwidth of a system is related to the transition times of the waveform; there are formulas allowing one to be determined approximately from the other.
See also
*
List of periodic functions
*
Rectangular function
*
Pulse wave
*
Sine wave
*
Triangle wave
*
Sawtooth wave
*
Waveform
In electronics, acoustics, and related fields, the waveform of a signal is the shape of its graph as a function of time, independent of its time and magnitude scales and of any displacement in time.David Crecraft, David Gorham, ''Electron ...
*
Sound
In physics, sound is a vibration that propagates as an acoustic wave, through a transmission medium such as a gas, liquid or solid.
In human physiology and psychology, sound is the ''reception'' of such waves and their ''perception'' by ...
*
Multivibrator
A multivibrator is an electronic circuit used to implement a variety of simple two-state devices such as relaxation oscillators, timers, and flip-flops. The first multivibrator circuit, the astable multivibrator oscillator, was invented by Henri A ...
*
Ronchi ruling, a square-wave stripe target used in imaging.
*
Cross sea
*
Clarinet, a musical instrument that produces odd overtones approximating a square wave.
References
External links
Fourier decomposition of a square waveInteractive demo of square wave synthesis using sine waves, from GeoGebra site.
Square Wave Approximated by SinesInteractive demo of square wave synthesis using sine waves.
Square wave.
{{Waveforms
Waveforms
Fourier series