Sensor Drive

The hw.sensors framework is a kernel-level hardware sensors framework originating from OpenBSD, which uses the sysctl kernel interface as the transport layer between the kernel and the userland. , the framework is used by over a hundred device drivers in OpenBSD to export various environmental sensors, with temperature sensors being the most common type. Consumption and monitoring of sensors is done in the userland with the help of sysctl, systat, sensorsd, ntpd, snmpd, ports/sysutils/symon and GKrellM.

Drivers

In OpenBSD, the framework is integrated with Dell's ESM, IPMI and I²C, in addition to a number of popular Super I/O chips through .

A major difference compared to other solutions like lm_sensors is simplicity and a works-by-default approach in the drivers, which don't require nor support any configurability; no installation or configuration actions are required by the system administrator in order to get the sensors going. This is coupled with a fine-tuned ad-hoc read-only scan procedure on the I²C bus, written by Theo de Raadt in a centralised way with a cache, making it possible to leave it enabled by default at all times, unlike the competing solutions.

RAID drive sensors

Support for automatic monitoring of RAID drives is also provided through the sensors framework, this concept of sensors of drive type has been backported by NetBSD back into envsys in 2007.

OpenNTPD timedelta sensors

OpenNTPD uses sensors of type timedelta in order to synchronise time. These are provided by NMEA and other drivers.

History

The framework was originally devised in 2003 by Alexander Yurchenko, when he was porting several envsys-based drivers from NetBSD. Instead of porting NetBSD's envsys, a simpler sysctl-based mechanism was developed.

The framework received a major uptick in usage by the device drivers with the release of OpenBSD 3.9, where in a period of merely 6 months, the number of individual drivers using the framework went from 9 in OpenBSD 3.8 (released ) to 33 in OpenBSD 3.9 (released ).

, the framework was used by 44 devices drivers; it is at this time that a patchset has been committed converting a simple one-level addressing scheme into a more stable multi-layer addressing.

In 2007, the framework was ported to FreeBSD as part of a Google Summer of Code grant; it has been adopted by DragonFly BSD later that year. The usability of the , the sensors monitoring daemon, has been vastly improved in 2007, partly due to same GSoC grant.

, the total number of drivers stood at 68 in OpenBSD 4.4; growing by 7 drivers in a 6-month release cycle. This level of growth, of one new driver per month on average, has been common throughout the history of the framework since OpenBSD 3.9.

The values exported by the drivers through the framework are read-only; however, an external patch exists that implements the fan control functionality in both the framework as well as one of the drivers for the most popular family of Super I/O chips; this patchset was provided for both OpenBSD and DragonFly BSD.

See also

* lm_sensors
* SpeedFan

References

External links

*
*
*

{{DragonFly

BSD software
OpenBSD
FreeBSD
DragonFly BSD
Software using the ISC license
System administration