RAPIEnet on:
[Wikipedia]
[Google]
[Amazon]
RAPIEnet (Real-time Automation Protocols for Industrial Ethernet) is Korea's first Ethernet international standard for real-time data transmission.
*An Ethernet-based industrial networking protocol developed in-house by LSIS guarantees real-time transmission and is registered as an international standard. (IEC 61158-3-21: 2010, IEC 61158-4-21: 2010, IEC 61158-5-21: 2010, IEC 61158-6-21: 2010, IEC 61784-2: 2010, IEC 62439-7)
*An embedded Ethernet switch with two ports enables the network expansion in a daisy chain without the need for an additional external switch, easy installation and wiring reduction.
*With 100Mbit/s/1Gbit/s transmission speed, electrical and optical media can be used together.
*Supports transmission modes such as Unicast, Multicast and
/ref> *IEC 61158-5-21: 2010, Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements. *IEC 61158-6-21: 2010, Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 elements. *IEC 61784-2: 2010, Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3. *IEC 62439-7, Industrial communication networks - High availability automation networks - Part 7: Ring-based Redundancy Protocol (RRP)
*An embedded hardware-based switch is adopted for real-time data transmission.
*With the full-duplex communication support, each node has dual link routes in a ring topology.
*RAPIEnet Ether type: 0x88FE
#Transmits signal from Device 1 to Device 3.
#A fault occurs between Device 2 and Device 3.
#Notify the fault from Device 2 to Device 1.
#Transmits signal back from Device 1 to Device 3.
*Fiber Optics/Copper Media
: - Copper: Low installation costs with relatively big noise.
: - Optics: High installation costs with low noise and relatively long wiring.
*Simple and efficient wiring is available by combining the features of two wires that have advantages and disadvantages.
IEC 61784-5-17
/ref>
Broadcast
Broadcasting is the distribution of audio or video content to a dispersed audience via any electronic mass communications medium, but typically one using the electromagnetic spectrum ( radio waves), in a one-to-many model. Broadcasting began ...
.
*Supports "Store & Forward”and “Cut Through” switching.
Acquired Standards
International Standards
*IEC 61158-3-21: 2010, Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements. *IEC 61158-4-21: 2010, Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements.IEC 61158-4-21: 2010/ref> *IEC 61158-5-21: 2010, Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements. *IEC 61158-6-21: 2010, Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 elements. *IEC 61784-2: 2010, Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3. *IEC 62439-7, Industrial communication networks - High availability automation networks - Part 7: Ring-based Redundancy Protocol (RRP)
RAPIEnet Technology
Protocol Stack Structure
Embedded dual port switch motion
*An embedded hardware-based switch is adopted for real-time data transmission.
*With the full-duplex communication support, each node has dual link routes in a ring topology.
Frame Format
*RAPIEnet Ether type: 0x88FE
Topology
Recovery System
*With an embedded switch and full-duplex, it has dual link routes and communication fault tolerance, enabling fast recovery capabilities. : - Recovery time < 10 ms
#Transmits signal from Device 1 to Device 3.
#A fault occurs between Device 2 and Device 3.
#Notify the fault from Device 2 to Device 1.
#Transmits signal back from Device 1 to Device 3.
Flexible Hybrid Structure
*Fiber Optics/Copper Media
: - Copper: Low installation costs with relatively big noise.
: - Optics: High installation costs with low noise and relatively long wiring.
*Simple and efficient wiring is available by combining the features of two wires that have advantages and disadvantages.
System Diagram Using RAPIEnet
Others
Other international standards in process
*IEC 61784-5-17, Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 (to be registered as an IEC international standard in 2012)/ref>
References