Open Circuit Potential
   HOME

TheInfoList



OR:

Open-circuit voltage (abbreviated as OCV or VOC) is the difference of electrical potential between two terminals of an
electronic device The field of electronics is a branch of physics and electrical engineering that deals with the emission, behaviour and effects of electrons using electronic devices. Electronics uses active devices to control electron flow by amplification ...
when disconnected from any circuit. There is no external load connected. No external electric current flows between the terminals. Alternatively, the open-circuit voltage may be thought of as the voltage that must be applied to a
solar cell A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical and chemical phenomenon.
or a
battery Battery most often refers to: * Electric battery, a device that provides electrical power * Battery (crime), a crime involving unlawful physical contact Battery may also refer to: Energy source *Automotive battery, a device to provide power t ...
to stop the current. It is sometimes given the symbol Voc. In
network analysis Network analysis can refer to: * Network theory, the analysis of relations through mathematical graphs ** Social network analysis, network theory applied to social relations * Network analysis (electrical circuits) See also *Network planning and ...
this
voltage Voltage, also known as electric pressure, electric tension, or (electric) potential difference, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to ...
is also known as the Thévenin voltage. The open-circuit voltages of batteries and solar cells are often quoted under particular conditions (state-of-charge, illumination, temperature, etc.). The potential difference mentioned for batteries and cells is usually the open-circuit voltage. The value of the open-circuit voltage of a
transducer A transducer is a device that converts energy from one form to another. Usually a transducer converts a signal in one form of energy to a signal in another. Transducers are often employed at the boundaries of automation, measurement, and cont ...
equals its electromotive force (emf), which is the maximum potential difference it can produce when not providing current.


Example

Consider the circuit: If we want to find the open-circuit voltage across the 5Ω resistor, first disconnect it from the circuit: Find the equivalent resistance in loop 1 to find the current in loop 1. Use Ohm’s law with that current to find the potential drop across the resistance C. Note that since no current is flowing through resistor B, there is no potential drop across it, so it does not affect the open-circuit voltage. The open-circuit voltage is the potential drop across the resistance C, which is: \frac\ 100\ V_\sim\ . This is just an example. Many other ways can be used.


See also

* Electromotive force *
Short circuit A short circuit (sometimes abbreviated to short or s/c) is an electrical circuit that allows a current to travel along an unintended path with no or very low electrical impedance. This results in an excessive current flowing through the circui ...
* Thevenin's Theorem


References

Electrical parameters {{Energy-stub