A network segment is a portion of a

computer network A computer network is a collection of communicating computers and other devices, such as printers and smart phones. In order to communicate, the computers and devices must be connected by wired media like copper cables, optical fibers, or b ...

. The nature and extent of a segment depends on the nature of the network and the device or devices used to interconnect end stations.

Ethernet

According to the defining IEEE 802.3 standards for

Ethernet Ethernet ( ) is a family of wired computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). It was commercially introduced in 1980 and first standardized in 198 ...

, a network segment is an ''electrical connection'' between networked devices using a

shared medium In telecommunication, a shared medium is a medium or channel of information transfer that serves more than one user at the same time. In order for most channels to function correctly, no more than one user can be transmitting at a time, so a c ...

. In the original 10BASE5 and 10BASE2 Ethernet varieties, a segment would therefore correspond to a single coax cable and all devices tapped into it. At this point in the evolution of Ethernet, multiple network segments could be connected with

repeater In telecommunications, a repeater is an electronic device that receives a signal and retransmits it. Repeaters are used to extend transmissions so that the signal can cover longer distances or be received on the other side of an obstruction. Some ...

s (in accordance with the 5-4-3 rule for 10 Mbit Ethernet) to form a larger collision domain. With twisted-pair Ethernet, electrical segments can be joined using repeaters or repeater hubs as can other varieties of Ethernet. This corresponds to the extent of an OSI layer 1 network and is equivalent to the collision domain. The 5-4-3 rule applies to this collision domain. Using switches or

bridges A bridge is a structure built to span a physical obstacle (such as a body of water, valley, road, or railway) without blocking the path underneath. It is constructed for the purpose of providing passage over the obstacle, which is usually somet ...

, multiple layer-1 segments can be combined to a common

layer-2 The data link layer, or layer 2, is the second layer of the seven-layer OSI model of computer networking. This layer is the protocol layer that transfers data between nodes on a network segment across the physical layer. The data link layer p ...

segment, i.e. all nodes can communicate with each other through

MAC address A MAC address (short for medium access control address or media access control address) is a unique identifier assigned to a network interface controller (NIC) for use as a network address in communications within a network segment. This use i ...

ing or broadcasts. A layer-2 segment is equivalent to a

broadcast domain A broadcast domain is a logical division of a computer network, in which all nodes can reach each other by broadcast at the data link layer. A broadcast domain can be within the same LAN segment or it can be bridged to other LAN segments. In te ...

. Traffic within a layer-2 segment can be separated into virtually distinct partitions by using

VLAN A virtual local area network (VLAN) is any broadcast domain that is partitioned and isolated in a computer network at the data link layer ( OSI layer 2).IEEE 802.1Q-2011, ''1.4 VLAN aims and benefits'' In this context, virtual refers to a ...

s. Each VLAN forms its own logical layer-2 segment.

IP

layer-3 In the seven-layer OSI model of computer networking, the network layer is layer 3. The network layer is responsible for packet forwarding including routing through intermediate routers. Functions The network layer provides the means of transf ...

segment in an

IP network The Internet protocol suite, commonly known as TCP/IP, is a framework for organizing the communication protocols used in the Internet and similar computer networks according to functional criteria. The foundational protocols in the suite are ...

is called a

subnetwork A subnet, or subnetwork, is a logical subdivision of an IP network. Updated by RFC 6918. The practice of dividing a network into two or more networks is called subnetting. Computers that belong to the same subnet are addressed with an identic ...

, formed by all nodes sharing the same network prefix as defined by their IP addresses and the network mask. Communication between layer-3 subnets requires a router. Hosts on a subnet communicate directly using the layer-2 segment that connects them. Most often a subnetwork corresponds exactly with the underlying layer-2 segment but it is also possible to run multiple subnets on a single layer-2 segment.

References

{{DEFAULTSORT:Network Segment Ethernet Network architecture