A luthier ( ; ) is a
craftsperson who builds or repairs
string instrument
In musical instrument classification, string instruments, or chordophones, are musical instruments that produce sound from vibrating strings when a performer strums, plucks, strikes or sounds the strings in varying manners.
Musicians play some ...
s.
Etymology
The word ' is originally
French and comes from ''luth'', the French word for "
lute
A lute ( or ) is any plucked string instrument with a neck (music), neck and a deep round back enclosing a hollow cavity, usually with a sound hole or opening in the body. It may be either fretted or unfretted.
More specifically, the term "lu ...
". The term was originally used for makers of lutes, but it came to be used in French for makers of most
bowed and
plucked stringed instruments such as members of the
violin family (including
viola
The viola ( , () ) is a string instrument of the violin family, and is usually bowed when played. Violas are slightly larger than violins, and have a lower and deeper sound. Since the 18th century, it has been the middle or alto voice of the ...
s,
cello
The violoncello ( , ), commonly abbreviated as cello ( ), is a middle pitched bowed (sometimes pizzicato, plucked and occasionally col legno, hit) string instrument of the violin family. Its four strings are usually intonation (music), tuned i ...
s, and
double bass
The double bass (), also known as the upright bass, the acoustic bass, the bull fiddle, or simply the bass, is the largest and lowest-pitched string instrument, chordophone in the modern orchestra, symphony orchestra (excluding rare additions ...
es) and
guitar
The guitar is a stringed musical instrument that is usually fretted (with Fretless guitar, some exceptions) and typically has six or Twelve-string guitar, twelve strings. It is usually held flat against the player's body and played by strumming ...
s. Luthiers, however, do not make
harp
The harp is a stringed musical instrument that has individual strings running at an angle to its soundboard; the strings are plucked with the fingers. Harps can be made and played in various ways, standing or sitting, and in orchestras or ...
s or pianos; these require different skills and construction methods because their strings are secured to a frame.
Craft
The
craft
A craft or trade is a pastime or an occupation that requires particular skills and knowledge of skilled work. In a historical sense, particularly the Middle Ages and earlier, the term is usually applied to people occupied in small scale pr ...
of luthiers, lutherie (rarely called "luthiery", but this often refers to stringed instruments other than those in the violin family), is commonly divided into the two main categories of makers of stringed instruments that are plucked or strummed and
makers of stringed instruments that are bowed. Since bowed instruments require a bow, the second category includes a subtype known as a
bow maker or archetier. Luthiers may also teach string-instrument making, either through
apprenticeship
Apprenticeship is a system for training a potential new practitioners of a trade or profession with on-the-job training and often some accompanying study. Apprenticeships may also enable practitioners to gain a license to practice in a regulat ...
or formal classroom instruction.
Plucked strings
Lutes
Early producers of
lute
A lute ( or ) is any plucked string instrument with a neck (music), neck and a deep round back enclosing a hollow cavity, usually with a sound hole or opening in the body. It may be either fretted or unfretted.
More specifically, the term "lu ...
s,
archlutes,
theorbos and
vihuela
The vihuela () is a 15th-century fretted plucked Spanish string instrument, shaped like a guitar (figure-of-eight form offering strength and portability) but tuned like a lute. It was used in 15th- and 16th-century Spain as the equivalent of t ...
s include the
Tieffenbrucker family,
Martin Hoffmann and
Matteo Sellas.
Guitars

Two luthiers of the early 19th century connected with the development of the modern classical guitar are
Louis Panormo and
Georg Staufer.
Antonio Torres Jurado is credited with developing the form of
classical guitar
The classical guitar, also known as Spanish guitar, is a member of the guitar family used in classical music and other styles. An acoustic wooden string (music), string instrument with strings made of catgut, gut or nylon, it is a precursor of the ...
still in use.
C.F. Martin of Germany developed a form that evolved into the modern steel-string acoustic guitar.

The American luthier
Orville Gibson
Orville H. Gibson (May 8, 1856 – August 19, 1918) was an American luthier who founded the Gibson (guitar company), Gibson Guitar Company in Kalamazoo, Michigan in 1902, makers of guitars, mandolins and other instruments.
His earliest known ins ...
specialized in mandolins, and is credited with creating the
archtop guitar
An archtop guitar is a hollow acoustic guitar, acoustic or semi-acoustic guitar, semi-acoustic guitar with a full body and a distinctive arched top, whose sound is particularly popular with jazz guitar, jazz, blues, and rockabilly players.
Typic ...
. The 20th-century American luthiers
John D'Angelico and
Jimmy D'Aquisto made archtop guitars.
Lloyd Loar worked briefly for the
Gibson Guitar Corporation
Gibson, Inc. (formerly Gibson Guitar Corporation and Gibson Brands Inc.) is an American manufacturer of Guitar manufacturing, guitars, other musical instruments, and professional audio equipment from Kalamazoo, Michigan, and now based in Nashvi ...
making mandolins and guitars. His designs for a family of arch top instruments (mandolin, mandola, guitar, et cetera) are held in high esteem by today's luthiers, who seek to reproduce their sound. C. F. Martin apprenticed to Johann Georg Stauffer, a guitar maker in Vienna, Austria and
Martin & Co. was born, with the X bracing being developed in the 1850s. Martin & Co still produce acoustic guitars.
Paul Bigsby's innovation of the
tremolo arm
A vibrato system on a guitar is a mechanical device used to temporarily change the pitch (music), pitch of the strings. It adds vibrato to the sound by changing the Tension (physics), tension of the strings, typically at the Bridge (instrument), ...
for archtop and
electric guitar
An electric guitar is a guitar that requires external electric Guitar amplifier, sound amplification in order to be heard at typical performance volumes, unlike a standard acoustic guitar. It uses one or more pickup (music technology), pickups ...
s is still in use and may have influenced
Leo Fender's design for the
Stratocaster solid-body electric guitar, as well as the
Jaguar and
Jazzmaster. Concurrent with Fender's work, guitarist
Les Paul
Lester William Polsfuss (June 9, 1915 – August 12, 2009), known as Les Paul, was an American jazz guitarist, jazz, country guitarist, country, and blues guitarist, songwriter, luthier, and inventor. He was one of the pioneers of the solid body ...
independently developed a solid-body electric guitar. These were the first fretted, solid-body electric guitars—though they were preceded by the cast
aluminum
Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...
"
frying pan", a solid-body electric
lap steel guitar developed and eventually patented by
George Beauchamp, and built by
Adolph Rickenbacher.
A company founded by luthier Friedrich
Gretsch and continued by his son and grandson, Fred and Fred, Jr., originally made banjos, but now mainly produce electric guitars.
Bowed strings

Bowed instruments include:
cello
The violoncello ( , ), commonly abbreviated as cello ( ), is a middle pitched bowed (sometimes pizzicato, plucked and occasionally col legno, hit) string instrument of the violin family. Its four strings are usually intonation (music), tuned i ...
,
crwth,
double bass
The double bass (), also known as the upright bass, the acoustic bass, the bull fiddle, or simply the bass, is the largest and lowest-pitched string instrument, chordophone in the modern orchestra, symphony orchestra (excluding rare additions ...
,
erhu,
fiddle
A fiddle is a Bow (music), bowed String instrument, string musical instrument, most often a violin or a bass. It is a colloquial term for the violin, used by players in all genres, including European classical music, classical music. Althou ...
,
hudok,
morin khuur,
nyckelharpa,
hurdy-gurdy
The hurdy-gurdy is a string instrument that produces sound by a hand-turned crank, rosined wheel rubbing against the strings. The wheel functions much like a violin (or nyckelharpa) bow, and single notes played on the instrument sound similar ...
,
rabab,
rebec,
sarangi
The sārangī is a bowed, short-necked three-stringed instrument played in traditional music from South Asia – Punjabi folk music, Rajasthani folk music, Sindhi folk music, Haryanvi folk music, Braj folk music, and Boro folk music (the ...
,
viol
The viola da gamba (), or viol, or informally gamba, is a bowed and fretted string instrument that is played (i.e. "on the leg"). It is distinct from the later violin family, violin, or ; and it is any one of the earlier viol family of bow (m ...
(
viola da gamba
The viola da gamba (), or viol, or informally gamba, is a bowed and fretted string instrument that is played (i.e. "on the leg"). It is distinct from the later violin family, violin, or ; and it is any one of the earlier viol family of bow (m ...
),
viola
The viola ( , () ) is a string instrument of the violin family, and is usually bowed when played. Violas are slightly larger than violins, and have a lower and deeper sound. Since the 18th century, it has been the middle or alto voice of the ...
,
viola da braccio,
viola d'amore, and
violin
The violin, sometimes referred to as a fiddle, is a wooden chordophone, and is the smallest, and thus highest-pitched instrument (soprano) in regular use in the violin family. Smaller violin-type instruments exist, including the violino picc ...
.
The purported inventor of the violin is
Andrea Amati. Amati was originally a lute maker, but turned to the new instrument form of violin in the mid-16th century. He was the progenitor of the Amati family of luthiers active in Cremona, Italy until the 18th century. Andrea Amati had two sons. His eldest was
Antonio Amati (''circa'' 1537–1607), and the younger,
Girolamo Amati (''circa'' 1561–1630). Girolamo is better known as Hieronymus, and together with his brother, produced many violins with labels inside the instrument reading "A&H". Antonio died having no known offspring, but Hieronymus became a father. His son Nicolò (1596–1684) was himself a master luthier who had several apprentices of note, including
Antonio Stradivari (probably), Andrea
Guarneri, Bartolomeo Pasta, Jacob Railich, Giovanni Battista Rogeri, Matthias
Klotz, and possibly
Jacob Stainer and
Francesco Rugeri. It is even possible
Bartolomeo Cristofori, later inventor of the piano, apprenticed under him (although census data does not support this, which paints this as a possible myth).
Gasparo Duiffopruggar of
Füssen, Germany, was once incorrectly credited as the inventor of the violin. He was likely a maker, but no documentation survives, and no instruments survive that experts unequivocally know are his.
Gasparo da Salò of
Brescia
Brescia (, ; ; or ; ) is a city and (municipality) in the region of Lombardy, in Italy. It is situated at the foot of the Alps, a few kilometers from the lakes Lake Garda, Garda and Lake Iseo, Iseo. With a population of 199,949, it is the se ...
(Italy) was another early luthier of the violin family. About 80 of his instruments survive, and around 100 documents that relate to his work. He was also a double bass player and son and nephew of two violin players: Francesco and Agosti, respectively.
Da Salò made many instruments and exported to France and Spain, and probably to England. He had at least five apprentices: his son Francesco, a helper named Battista, Alexander of Marsiglia, Giacomo Lafranchini and
Giovanni Paolo Maggini. Maggini inherited da Salò's business in Brescia.
Valentino Siani worked with Maggini. In 1620, Maggini moved to Florence.
By century
17th
Luthiers born in the mid-17th century include
Giovanni Grancino,
Vincenzo Rugeri,
Carlo Giuseppe Testore, and his sons
Carlo Antonio Testore
Carlo Antonio Testore (1687–1765) was a Milanese luthier.
Life and career
Carlo Antonio Testore was born in Milan
Milan ( , , ; ) is a city in northern Italy, regional capital of Lombardy, the largest city in Italy by urban area a ...
and
Paolo Antonio Testore, all from
Milan
Milan ( , , ; ) is a city in northern Italy, regional capital of Lombardy, the largest city in Italy by urban area and the List of cities in Italy, second-most-populous city proper in Italy after Rome. The city proper has a population of nea ...
. From
Venice
Venice ( ; ; , formerly ) is a city in northeastern Italy and the capital of the Veneto Regions of Italy, region. It is built on a group of 118 islands that are separated by expanses of open water and by canals; portions of the city are li ...
the luthiers
Matteo Goffriller,
Domenico Montagnana,
Sanctus Seraphin, and
Carlo Annibale Tononi were principals in the Venetian school of violin making (although the latter began his career in
Bologna
Bologna ( , , ; ; ) is the capital and largest city of the Emilia-Romagna region in northern Italy. It is the List of cities in Italy, seventh most populous city in Italy, with about 400,000 inhabitants and 150 different nationalities. Its M ...
).
Carlo Bergonzi (luthier) purchased Antonio Stradivari's shop a few years after the master's death.
David Tecchler, who was born in Austria, later worked in both Venice and
Rome
Rome (Italian language, Italian and , ) is the capital city and most populated (municipality) of Italy. It is also the administrative centre of the Lazio Regions of Italy, region and of the Metropolitan City of Rome. A special named with 2, ...
.
18th
Luthiers from the early 18th century include
Nicolò Gagliano of
Naples
Naples ( ; ; ) is the Regions of Italy, regional capital of Campania and the third-largest city of Italy, after Rome and Milan, with a population of 908,082 within the city's administrative limits as of 2025, while its Metropolitan City of N ...
, Italy,
Carlo Ferdinando Landolfi of Milan, and
Giovanni Battista Guadagnini, who roamed throughout Italy during his lifetime. From Austria originally,
Leopold Widhalm later established himself in
Nürnberg
Nuremberg (, ; ; in the local East Franconian dialect: ''Nämberch'' ) is the largest city in Franconia, the second-largest city in the German state of Bavaria, and its 544,414 (2023) inhabitants make it the 14th-largest city in Germany. ...
, Germany.
The Jérôme-Thibouville-Lamy firm started making wind instruments around 1730 at
La Couture-Boussey, then moved to Mirecourt around 1760 and started making violins, guitars, mandolins, and musical accessories.
19th
The early 19th-century luthiers of the
Mirecourt school of violin making in France were the
Vuillaume family,
Charles Jean Baptiste Collin-Mezin, and Collin-Mezin's son,
Charles Collin-Mezin, Jr., Honore Derazey, Nicolas Lupot, Charles Macoutel,
Charles Mennégand, and Pierre Silvestre.
Nicola Utili (also known as Nicola da Castel Bolognese) (Ravenna, Italy, 1888–1962), beside traditional lute works, experimented the making of "pear-shaped" violins.
See also
*
List of luthiers
*
Tonewood
*
Experimental luthier
*
:Lutherie reference books
*
Paracho de Verduzco
References
Further reading
* ''Historical Lute Construction'' by Robert Lundberg, Guild of American Luthiers (2002)
* ''The Complete Luthier's Library. A Useful International Critical Bibliography for the Maker and the Connoisseur of Stringed and Plucked Instruments''. Bologna, Florenus Edizioni 1990.
* ''Mottola's Cyclopedic Dictionary of Lutherie Terms''. R.M. Mottola 2020.
Guild of American LuthiersGuitar MuseumClassical Guitar Museum, (UK)
Luthier Interviews Guitarbench.com archive of Luthier Interviews.
The Consortium of Violinmakers "Antonio Stradivari" CREMONALuthiers ForumA large online lutherie community. Educational.
Contemporary violin makers from China and Taiwan* '' Il Liutaio – Origine e costruzione del violino e degli strumenti ad arco moderni'', by Angeloni Domenico, legatura tela edit. fig., pp. XXVI-558 con 176 figure e 33 tavole, Milano, HOEPLI, 1923
* ''The secrets of Stradivari'' by Simone F. Sacconi, Libreria del Convegno in Cremona, Cremona, 1972
Simone Fernando Sacconi
{{Authority control
Lutherie
Woodworking
Violins