In
photometry, luminous intensity is a measure of the
wavelength-weighted
power emitted by a
light source in a particular direction per unit
solid angle, based on the
luminosity function, a standardized model of the sensitivity of the
human eye. The
SI unit of luminous intensity is the
candela (cd), an
SI base unit
The SI base units are the standard units of measurement defined by the International System of Units (SI) for the seven base quantities of what is now known as the International System of Quantities: they are notably a basic set from which al ...
.
Measurement
Photometry deals with the measurement of visible light as perceived by human eyes. The human eye can only see light in the
visible spectrum
The visible spectrum is the spectral band, band of the electromagnetic spectrum that is visual perception, visible to the human eye. Electromagnetic radiation in this range of wavelengths is called ''visible light'' (or simply light).
The optica ...
and has different sensitivities to
light
Light, visible light, or visible radiation is electromagnetic radiation that can be visual perception, perceived by the human eye. Visible light spans the visible spectrum and is usually defined as having wavelengths in the range of 400– ...
of different wavelengths within the spectrum. When adapted for bright conditions (
photopic vision), the eye is most sensitive to yellow-green light at 555 nm. Light with the same
radiant intensity at other wavelengths has a lower luminous intensity. The curve which represents the response of the human eye to light is a defined standard function or established by the
International Commission on Illumination (CIE, for ''Commission Internationale de l'Éclairage'') and standardized in collaboration with the
ISO
The International Organization for Standardization (ISO ; ; ) is an independent, non-governmental, international standard development organization composed of representatives from the national standards organizations of member countries.
Me ...
.
Luminous intensity of artificial light sources is typically measured using and a
goniophotometer outfitted with a
photometer or a spectroradiometer.
Relationship to other measures
Luminous intensity should not be confused with another photometric unit,
luminous flux, which is the total perceived power emitted in all directions. Luminous intensity is the perceived power ''per unit solid angle''. If a lamp has a 1 lumen bulb and the optics of the lamp are set up to focus the light evenly into a 1
steradian
The steradian (symbol: sr) or square radian is the unit of solid angle in the International System of Units (SI). It is used in three-dimensional geometry, and is analogous to the radian, which quantifies planar angles. A solid angle in the fo ...
beam, then the beam would have a luminous intensity of 1 candela. If the optics were changed to concentrate the beam into 1/2 steradian then the source would have a luminous intensity of 2 candela. The resulting beam is narrower and brighter, though its luminous flux remains unchanged.
Luminous intensity is also not the same as the
radiant intensity, the corresponding objective
physical quantity
A physical quantity (or simply quantity) is a property of a material or system that can be Quantification (science), quantified by measurement. A physical quantity can be expressed as a ''value'', which is the algebraic multiplication of a ''nu ...
used in the measurement science of
radiometry.
Units
Like other SI base units, the candela has an
operational definition—it is defined by the description of a physical process that will produce one candela of luminous intensity. By definition, if one constructs a light source that emits monochromatic green light with a frequency of 540 THz, and that has a radiant intensity of 1/683
watt
The watt (symbol: W) is the unit of Power (physics), power or radiant flux in the International System of Units (SI), equal to 1 joule per second or 1 kg⋅m2⋅s−3. It is used to quantification (science), quantify the rate of Work ...
s per
steradian
The steradian (symbol: sr) or square radian is the unit of solid angle in the International System of Units (SI). It is used in three-dimensional geometry, and is analogous to the radian, which quantifies planar angles. A solid angle in the fo ...
in a given direction, that light source will emit one candela in the specified direction.
The frequency of light used in the definition corresponds to a wavelength in a vacuum of , which is near the peak of the eye's response to light. If the source emitted uniformly in all directions, the total
radiant flux would be about , since there are 4 steradians in a sphere. A typical modern
candle produces very roughly one candela while releasing heat at roughly .
Prior to the definition of the candela, a variety of units for luminous intensity were used in various countries. These were typically based on the brightness of the flame from a "standard candle" of defined composition, or the brightness of an incandescent filament of specific design. One of the best-known of these standards was the
English standard:
candlepower. One candlepower was the light produced by a pure
spermaceti candle weighing one sixth of a pound and burning at a rate of 120
grains per hour. Germany, Austria, and Scandinavia used the
Hefnerkerze, a unit based on the output of a
Hefner lamp.
In 1881,
Jules Violle proposed the ''
Violle'' as a unit of luminous intensity, and it was notable as the first unit of light intensity that did not depend on the properties of a particular lamp. All of these units were superseded by the definition of the candela.
Usage
thumb , Photopic (black) and scotopic vision, scotopic (green) luminosity functions.
[ The photopic includes the CIE 1931 standard][ (solid), the Judd–Vos 1978 modified data][ (dashed), and the Sharpe, Stockman, Jagla & Jägle 2005 data][ (dotted). The horizontal axis is wavelength in Nanometre, nm.
The luminous intensity for monochromatic light of a particular wavelength is given by
where
* is the luminous intensity in candelas (cd),
* is the radiant intensity in watts per steradian (W/sr),
* is the standard luminosity function.
If more than one wavelength is present (as is usually the case), one must sum or integrate over the spectrum of wavelengths present to get the luminous intensity:
]
See also
* Brightness
* International System of Quantities
* Radiance
References
Curve data
{{DEFAULTSORT:Luminous Intensity
Scalar physical quantities
SI base quantities
Photometry
Electromagnetic quantities