Installed capacity

Nameplate capacity, also known as the rated capacity, nominal capacity, installed capacity, maximum effect or gross capacity,Glossary of Terms in PRIS Reports.
IAEA-PRIS is the intended full-load sustained output of a facility such as a power station,Energy glossary
'' Energy Information Administration''. Retrieved: 23 September 2010.Glossary
Nuclear Regulatory Commission, 2 August 2010. Retrieved: 23 September 2010. electric generator, a chemical plant,Plant Performance Data (PPD)
''ICIS''. Retrieved: 23 September 2010. fuel plant, mine,The Future of Tantalum and Niobium
''Mining-Technology'', 14 Jan 2010. Retrieved: 23 September 2010. metal refinery,Refining Capacity
'' Alcoa'', December 31, 2009. and many others. Nameplate capacity is the theoretical output registered with authorities for classifying the unit. For intermittent power sources, such as wind and solar, nameplate power is the source's output under ideal conditions, such as maximum usable wind or high sun on a clear summer day.

Capacity factor measures the ratio of actual output over an extended period to nameplate capacity. Power plants with an output consistently near their nameplate capacity have a high capacity factor.

For electric power stations, the power output is expressed in Megawatt electrical (MWe). For fuel plants, it is the refinery capacity in barrels per day.Refinery Economics
''Natural Resources Canada'', 5 january 2009.Magnificent seven
''Arabian Business'', 17 June 2008.

Power stations

Dispatchable power

For dispatchable power, this capacity depends on the internal technical capability of the plant to maintain output for a reasonable amount of time (for example, a day), neither momentarily nor permanently, and without considering external events such as lack of fuel or internal events such as maintenance. Actual output can be different from nameplate capacity for a number of reasons depending on equipment and circumstances.Kleiser, Thomas
Response to CDM
page 2-4 by '' TÜV'', 4 March 2009. Retrieved: 23 September 2010.Swain, Bibb
Designed to go above Nameplate Capacity
''Ethanol Producer'', November 2006. Retrieved: 23 September 2010.

Non-dispatchable power

For non-dispatchable power, particularly renewable energy, nameplate capacity refers to generation under ideal conditions. Output is generally limited by weather conditions, hydroelectric dam water levels, tidal variations and other outside forces. Equipment failures and maintenance usually contribute less to capacity factor reduction than the innate variation of the power source.
In photovoltaics, capacity is rated under ''Standard Test Conditions'' usually expressed as watt-peak (W_p). In addition, a PV system's nameplate capacity is sometimes denoted by a subindex, for example, MW_DC or MW_AC, to identify the raw DC power or converted AC power output.

Generator capacity

The term is connected with nameplates on electrical generators as these plates describing the model name and manufacturer usually also contain the rated output,Reitze, Arnold W
Air pollution control law: compliance and enforcement
page 260 '' George Washington University Law School'', 2001. , Retrieved: 23 September 2010. but the rated output of a power station to the electrical grid is invariably less than the generator nameplate capacity, because the components connecting the actual generator to the grid also use power. Thus there is a distinction between component capacity and facility capacity.

See also

* Availability factor
* Declared net capacity (power plants)
*Electricity generation
*
* List of energy storage projects

References

{{Electricity generation

Power station technology
Electric power
Electrical generators
Energy conversion