The Hanson Woodwind is an all-wooden
homebuilt aircraft
Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.Armstrong, Kenn ...
with a
fiberglass
Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cl ...
wing.
Design and development
The Woodwind was a homebuilt copy of the
Wittman Tailwind
The Wittman W-8 Tailwind is a popular two-seat light aircraft for homebuilding. It is a high-wing, braced cabin monoplane of taildragger configuration. It is constructed with a steel tubing fuselage, wood wings, and fabric covering. It offers exc ...
using all-wood construction, rather than welded steel tube and
aircraft fabric covering
Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are ...
for the
fuselage
The fuselage (; from the French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds crew, passengers, or cargo. In single-engine aircraft, it will usually contain an engine as well, although in some amphibious aircraft t ...
. Ironically, the Wittman design uses plywood covering for its wings, while the Woodwind uses fiberglass.
The Woodwind is a two-seat
side-by-side configuration
Tandem, or in tandem, is an arrangement in which a team of machines, animals or people are lined up one behind another, all facing in the same direction.
The original use of the term in English was in ''tandem harness'', which is used for two ...
,
strut-braced
In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
,
high-wing
A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes.
A monoplane has inherently the highest efficiency and lowest drag of any wing conf ...
aircraft with
conventional landing gear
Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Ter ...
and Plexiglas doors. Some construction elements were adapted from the all-wood
Bowers Fly Baby
The Bowers Fly Baby is a homebuilt, single-seat, open-cockpit, wood and fabric low-wing monoplane that was designed by famed United States aircraft designer and Boeing historian, Peter M. Bowers.[fuselage
The fuselage (; from the French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds crew, passengers, or cargo. In single-engine aircraft, it will usually contain an engine as well, although in some amphibious aircraft t ...]
sides and tail surfaces are built flat on a table at the same time and covered with aircraft grade
plywood. The wings are covered in fiberglass with
stainless steel torque tubes for
aileron
An aileron (French for "little wing" or "fin") is a hinged flight control surface usually forming part of the trailing edge of each wing of a fixed-wing aircraft. Ailerons are used in pairs to control the aircraft in roll (or movement arou ...
control. The fuel tanks and cowling are also made from fiberglass. The prototype used a moose-hide interior.
Operational history
The prototype first flew on 20 June 1969. The aircraft was written off in a non-fatal accident on 5 June 1976 after hitting a large rock.
Specifications (Hanson Woodwind)
See also
References
{{reflist
Homebuilt aircraft