History
During the mid-19th century, the Fabyan Windmill was constructed by Germans, German craftsmen, Louis Blackhaus, and his brother-in-law Freidrick Brockmann, on a site at Meyers Road near 16th Street in York Township, DuPage County, Illinois, York Township between Elmhurst, Illinois, Elmhurst and Oak Brook, Illinois (now Lombard, Illinois). By the early 20th century, the windmill had fallen into a state of disrepair. In 1914, George Fabyan purchased the disused windmill for approximately $8,000 from Mrs. Fred Runge. He then had it moved to its present location in Geneva Township, Kane County, Illinois, Geneva Township on the east side of the Fox River (Illinois River tributary), Fox River, close to Illinois Route 25 in July 1915. Fabyan spent an estimated $75,000 to have it moved, reconstructed, and restored. The Edgar E. Belding Company of West Chicago, Illinois, West Chicago was contracted by Fabyan to move the windmill from York Center, Illinois, York Center. It was slowly dismantled piece by piece, with Roman numerals carved into the beam (structure), beams and braces to facilitate correct reconstruction. Some of the largest beams had to be hauled by a team of mules. The windmill was reassembled on its present site by a Danish people, Danish millwright named Rasmussen, with the assistance of John Johnson and six others from the Wilson Bros. Construction Co. After nineteen months, the relocation and reconstruction were completed. The mill was a wonder in its day, because it is thought to be the only fully automatic wind-driven mill of its type. George Fabyan died in 1936, and his wife died two years later. The estate was then sold by the executors of the will to the Kane County Forest Preserve District for $70,500.Structure
The giant cypress wood beams, trimmed with Juglans nigra, black walnut, are all hand Woodworking joints, joined and doweled with wood dowels. In fact, there are no metal nails used inside the structure. Even the original gearing was handmade of hickory and maple, with all five floors containing different mill machinery, mechanisms. The windmill was a functioning mill used by the Fabyans for grinding several types of grain, including maize, corn, wheat, rye, and oats. It also served as a grain mill for Fabyan's herd of prized Jersey cattle. At the mill's top, or cap, is a huge gear, cogged wheel called the brake wheel, which was turned by wind blowing against the Windmill sail, sails. The sails are covered with canvas sailcloths to help catch the wind. The sails had to be entirely reconstructed by Rasmussen and John Johnson, because they were missing when Fabyan bought the mill. The sails span 74 feet 4 inches. The brake wheel, located in the cap, rotates an driveshaft, upright shaft running the height of the mill. This shaft supplied power to all of the mill's operations. There is a set of belt-driven grain elevator, elevators, remarkable for its time, that moved the grains from Chute (gravity), chutes to hopper (particulate collection container), hoppers, and even from floor to floor, making the mill almost fully automatic. Most other mills required workers to hand shovel materials between operations. During its reconstruction, the Colonel had a new foundation (engineering), foundation poured, which created a basement. In the basement, he had ovens installed whose vents and chimney extended underground beneath Route 25 to a structure that once stood on the other side. In addition to the ovens, marble slabs and cooling racks were also installed. It is thought that at one time, the windmill basement was an operating bakery. During the flour Rationing#Civilian rationing, rationing of World War I, the bakery supposedly produced bread for the Fabyan family and even for their two bears, Tom and Jerry. However, the extent of use of the mill's bakery is debatable due to an inadequate oven draft.Significance
The wind-powered mill is a type that was rarely built in the United States, where grist mills are usually powered by water. Its wooden gears and nail-less construction techniques are of interest both technically and architecturally. The mill is also an example of an America folly, a structure built primarily to enhance the landscape or view. In this case, George Fabyan, a wealthy merchant, purchased and moved the by-then inoperative mill to beautify his estate, but maintained it as a private mill with no commercial value.Today
Kane County considered the windmill's demolition as early as 1990 when it became structurally unsafe for public inspection. However, local citizens began fighting to keep the mill intact. In 1997, the Forest Preserve District contracted third-generation Dutch windmill maker Lucas Verbij to fully building restoration, restore the windmill for a cost of over $900,000. It made its public debut in June 2005. The grinding mechanisms to make flour have been restored and are in use today by mill volunteers who do demonstrations to the public. Even now, the varnish from 1915 is in near perfect condition because the climate inside the mill varies little from season to season due to its superior construction, and the Roman numeral markings carved into the beams used in original reconstruction are still visible.References
External links
* * Virtual visit of the Windmill: https://goo.gl/maps/dC2oLDQ59yL2 {{good article Towers completed in 1860 Windmills completed in 1860 Industrial buildings completed in 1860 Buildings and structures in Kane County, Illinois Dutch-American culture in Illinois Geneva, Illinois Grinding mills in Illinois Mill museums in the United States Museums in Kane County, Illinois National Register of Historic Places in Kane County, Illinois Nature reserves in Illinois Smock mills in the United States Grinding mills on the National Register of Historic Places in Illinois Octagonal buildings in the United States Windmills in Illinois Protected areas of Kane County, Illinois Riverbank Laboratories