A frame is a digital

data transmission Data communication, including data transmission and data reception, is the transfer of data, signal transmission, transmitted and received over a Point-to-point (telecommunications), point-to-point or point-to-multipoint communication chann ...

unit in

computer networking A computer network is a collection of communicating computers and other devices, such as printers and smart phones. In order to communicate, the computers and devices must be connected by wired media like copper cables, optical fibers, or b ...

and

telecommunications Telecommunication, often used in its plural form or abbreviated as telecom, is the transmission of information over a distance using electronic means, typically through cables, radio waves, or other communication technologies. These means of ...

. In

packet switched In telecommunications, packet switching is a method of grouping data into short messages in fixed format, i.e. '' packets,'' that are transmitted over a digital network. Packets consist of a header and a payload. Data in the header is used b ...

systems, a frame is a simple container for a single

network packet In telecommunications and computer networking, a network packet is a formatted unit of Data (computing), data carried by a packet-switched network. A packet consists of control information and user data; the latter is also known as the ''Payload ...

. In other telecommunications systems, a frame is a repeating structure supporting time-division multiplexing. A frame typically includes

frame synchronization In telecommunications, frame synchronization or framing is the process by which, while receiving a stream of fixed-length frames, the receiver identifies the frame boundaries, permitting the data bits within the frame to be extracted for decodin ...

features consisting of a sequence of bits or symbols that indicate to the receiver the beginning and end of the payload data within the stream of symbols or bits it receives. If a receiver is connected to the system during frame transmission, it ignores the data until it detects a new frame synchronization sequence.

Packet switching

In the

OSI model The Open Systems Interconnection (OSI) model is a reference model developed by the International Organization for Standardization (ISO) that "provides a common basis for the coordination of standards development for the purpose of systems inter ...

of computer networking, a frame is the

protocol data unit In telecommunications, a protocol data unit (PDU) is a single unit of information transmitted among peer entities of a computer network. It is composed of protocol-specific control information and user data. In the layered architectures of c ...

at the

data link layer The data link layer, or layer 2, is the second layer of the seven-layer OSI model of computer networking. This layer is the protocol layer that transfers data between nodes on a network segment across the physical layer. The data link layer p ...

. Frames are the result of the final layer of encapsulation before the data is transmitted over the physical layer. A frame is "the unit of transmission in a link layer protocol, and consists of a link layer header followed by a packet." Each frame is separated from the next by an interframe gap. A frame is a series of bits generally composed of frame synchronization bits, the packet payload, and a frame check sequence. Examples are

Ethernet frame In computer networking, an Ethernet frame is a data link layer protocol data unit and uses the underlying Ethernet physical layer transport mechanisms. In other words, a data unit on an Ethernet link transports an Ethernet frame as its paylo ...

Point-to-Point Protocol In computer networking, Point-to-Point Protocol (PPP) is a data link layer (layer 2) communication protocol between two routers directly without any host or any other networking in between. It can provide loop detection, authentication, transmissio ...

(PPP) frames,

Fibre Channel frame In computer networking, a Fibre Channel frame is the frame of the Fibre Channel Fibre Channel (FC) is a high-speed data transfer protocol providing in-order, lossless delivery of raw block data. Fibre Channel is primarily used to connect comp ...

s, and V.42 modem frames. Often, frames of several different sizes are nested inside each other. For example, when using

(PPP) over

asynchronous serial communication Asynchronous serial communication is a form of serial communication in which the communicating endpoints' interfaces are not continuously synchronized by a common clock signal. Synchronization ( clock recovery) is done by data-embedded signal ...

, the eight bits of each individual byte are framed by start and stop bits, MATLAB External Interfaces. Sectio
"Serial Data Format"
quote: "... one start bit... parity bit ... stop bit ... called framing bits because they frame the data bits." the payload data bytes in a network packet are framed by the header and footer, and several packets can be framed with frame boundary octets.

Time-division multiplex

In telecommunications, specifically in time-division multiplex (TDM) and time-division multiple access (TDMA) variants, a frame is a cyclically repeated data block that consists of a fixed number of time slots, one for each logical TDM channel or TDMA transmitter. In this context, a frame is typically an entity at the physical layer. TDM application examples are

SONET/SDH Synchronous Optical Networking (SONET) and Synchronous Digital Hierarchy (SDH) are standardized protocols that transfer multiple digital bit streams synchronously over optical fiber using lasers or highly coherent light from light-emitting diod ...

and the

ISDN Integrated Services Digital Network (ISDN) is a set of communication standards for simultaneous digital transmission of voice, video, data, and other network services over the digitalised circuits of the public switched telephone network. ...

circuit-switched B-channel, while TDMA examples are Circuit Switched Data used in early cellular voice services. The frame is also an entity for time-division duplex, where the mobile terminal may transmit during some time slots and receive during others.

References

{{DEFAULTSORT:Frame (Telecommunications) Computer networks Link protocols Packets (information technology) Units of information it:Ethernet#Frame

Packet switching

Time-division multiplex

See also

References