Embedded DRAM (eDRAM) is
dynamic random-access memory
Dynamic random-access memory (dynamic RAM or DRAM) is a type of random-access semiconductor memory that stores each bit of data in a memory cell, usually consisting of a tiny capacitor and a transistor, both typically based on metal-oxi ...
(DRAM) integrated on the same
die or
multi-chip module
A multi-chip module (MCM) is generically an electronic assembly (such as a package with a number of conductor terminals or "pins") where multiple integrated circuits (ICs or "chips"), semiconductor dies and/or other discrete components are int ...
(MCM) of an application-specific integrated circuit (ASIC) or
microprocessor
A microprocessor is a computer processor where the data processing logic and control is included on a single integrated circuit, or a small number of integrated circuits. The microprocessor contains the arithmetic, logic, and control circu ...
. eDRAM's cost-per-bit is higher when compared to equivalent standalone DRAM chips used as external memory, but the performance advantages of placing eDRAM onto the same chip as the processor outweigh the cost disadvantages in many applications. In performance and size, eDRAM is positioned between
level 3 cache and conventional DRAM on the memory bus, and effectively functions as a level 4 cache, though architectural descriptions may not explicitly refer to it in those terms.
Embedding memory on the ASIC or processor allows for much wider
bus
A bus (contracted from omnibus, with variants multibus, motorbus, autobus, etc.) is a road vehicle that carries significantly more passengers than an average car or van. It is most commonly used in public transport, but is also in use for cha ...
es and higher operation speeds, and due to much higher density of DRAM in comparison to
SRAM, larger amounts of memory can be installed on smaller chips if eDRAM is used instead of
eSRAM
Static random-access memory (static RAM or SRAM) is a type of random-access memory (RAM) that uses latching circuitry (flip-flop) to store each bit. SRAM is volatile memory; data is lost when power is removed.
The term ''static'' differen ...
. eDRAM requires additional fab process steps compared with embedded SRAM, which raises cost, but the 3× area savings of eDRAM memory offsets the process cost when a significant amount of memory is used in the design.
eDRAM memories, like all DRAM memories, require periodic refreshing of the memory cells, which adds complexity. However, if the memory refresh controller is embedded along with the eDRAM memory, the remainder of the ASIC can treat the memory like a simple SRAM type such as in
1T-SRAM.
eDRAM is used in various products, including
IBM