Distributed manufacturing

Distributed manufacturing, also known as distributed production, cloud producing, distributed digital manufacturing, and local manufacturing, is a form of decentralized manufacturing practiced by enterprises using a network of geographically dispersed manufacturing facilities that are coordinated using information technology. It can also refer to local manufacture via the historic cottage industry model, or manufacturing that takes place in the homes of consumers.

Enterprise

In enterprise environments, the primary attribute of distributed manufacturing is the ability to create value at geographically dispersed locations. For example, shipping costs could be minimized when products are built geographically close to their intended markets. Also, products manufactured in a number of small facilities distributed over a wide area can be customized with details adapted to individual or regional tastes. Manufacturing components in different physical locations and then managing the supply chain to bring them together for final assembly of a product is also considered a form of distributed manufacturing. Digital networks combined with additive manufacturing allow companies a decentralized and geographically independent distributed production ( cloud manufacturing).

Consumer

Within the maker movement and DIY culture, small scale production by consumers often using peer-to-peer resources is being referred to as distributed manufacturing. Consumers download digital designs from an open design repository website like Youmagine or Thingiverse and produce a product for low costs through a distributed network of 3D printing services such as 3D Hubs
Geomiq
In the most distributed form of distributed manufacturing the consumer becomes a prosumer and manufacturers products at home with an open-source 3-D printer such as the RepRap. In 2013 a desktop 3-D printer could be economically justified as a personal product fabricator and the number of free and open hardware designs were growing exponentially. Today there are millions of open hardware product designs at hundreds of repositories and there is some evidence consumers are 3-D printing to save money. For example, 2017 case studies probed the quality of: (1) six common complex toys; (2) Lego blocks; and (3) the customizability of open source board games and found that all filaments analyzed saved the prosumer over 75% of the cost of commercially available true alternative toys and over 90% for recyclebot filament. Overall, these results indicate a single 3D printing repository, MyMiniFactory, is saving consumers well over $60 million/year in offset purchases of only toys. These 3-D printers can now be used to make sophisticated high-value products like scientific instruments. Similarly, a study in 2022 found that 81% of open source designs provided economic savings and the total savings for the 3D printing community is more than $35 million from downloading only the top 100 products at YouMagine. In general, the savings are largest when compared to conventional products when prosumers use recycled materials in ' distributed recycling and additive manufacturing' (DRAM).

Social change

SomeKostakis, V.; Bauwens, M. (2014):
Network Society and Future Scenarios for a Collaborative Economy
'. Basingstoke, UK: Palgrave Macmillan.
wiki
call attention to the conjunction of commons-based peer production with distributed manufacturing techniques. The self-reinforced fantasy of a system of eternal growth can be overcome with the development of economies of scope, and here, the civil society can play an important role contributing to the raising of the whole productive structure to a higher plateau of more sustainable and customised productivity. Further, it is true that many issues, problems and threats rise due to the large democratization of the means of production, and especially regarding the physical ones. For instance, the recyclability of advanced nanomaterials is still questioned; weapons manufacturing could become easier; not to mention the implications on counterfeiting and on "intellectual property". It might be maintained that in contrast to the industrial paradigm whose competitive dynamics were about economies of scale, commons-based peer production and distributed manufacturing could develop economies of scope. While the advantages of scale rest on cheap global transportation, the economies of scope share infrastructure costs (intangible and tangible productive resources), taking advantage of the capabilities of the fabrication tools. And following Neil Gershenfeld in that “some of the least developed parts of the world need some of the most advanced technologies”, commons-based peer production and distributed manufacturing may offer the necessary tools for thinking globally but act locally in response to certain problems and needs. As well as supporting individual personal manufacturing social and economic benefits are expected to result from the development of local production economies. In particular, the humanitarian and development sector are becoming increasingly interested in how distributed manufacturing can overcome the supply chain challenges of last mile distribution. Further, distributed manufacturing has been proposed as a key element in the Cosmopolitan localism or cosmolocalism framework to reconfigure production by prioritizing socio-ecological well-being over corporate profits, over-production and excess consumption.

Technology

By localizing manufacturing, distributed manufacturing may enable a balance between two opposite extreme qualities in technology development: Low technology and High tech. This balance is understood as an inclusive middle, a "mid-tech", that may go beyond the two polarities, incorporating them into a higher synthesis. Thus, in such an approach, low-tech and high-tech stop being mutually exclusive. They instead become a dialectic totality. Mid-tech may be abbreviated to “both…and…” instead of “neither…nor…”. Mid-tech combines the efficiency and versatility of digital/automated technology with low-tech's potential for autonomy and resilience.

Contracting in Distributed Manufacturing

Distributed manufacturing (DM) is a production model that decentralizes manufacturing processes, enabling products to be designed, produced, and distributed closer to end-users. This shift from centralized production to localized networks offers advantages such as increased flexibility, cost efficiency, and local empowerment. However, it also introduces significant challenges in contracting due to the decentralized nature of roles and varying stakeholder responsibilities.

Research into contracting and order processing models tailored for distributed manufacturing has highlighted the need for flexible, role-based frameworks and advanced digital tools. Wardeh, M.; Nguema, J. (2024)
"Contracting for Distributed Manufacturing"
DO
10.5281/zenodo.14422458
These tools and frameworks are essential for addressing issues related to quality assurance, payment structures, legal compliance, and coordination among multiple actors. By addressing these challenges, contracting models for distributed manufacturing can unlock its potential for more localized, efficient, and sustainable production systems.
system prototype
has been developed to simplify contracting for distributed manufacturing. This tool allows buyers to manage orders across multiple manufacturers using a single interface, automating workflows to ensure clarity and accountability for everyone involved. This research was led by th
Internet of Production
as part of th
mAkE
project (African European Maker Innovation Ecosystem), funded by the European Horizon 2020 research and innovation programme.

References

{{reflist

Manufactured goods
Digital manufacturing
3D printing
Cloud computing