Copper alloys are metal alloys that have

copper Copper is a chemical element; it has symbol Cu (from Latin ) and atomic number 29. It is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. A freshly exposed surface of pure copper has a pinkish-orang ...

as their principal component. They have high resistance against

corrosion Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials (usually a metal) by chemical or electrochemical reaction with their environment. Corrosion engine ...

. Of the large number of different types, the best known traditional types are

bronze Bronze is an alloy consisting primarily of copper, commonly with about 12–12.5% tin and often with the addition of other metals (including aluminium, manganese, nickel, or zinc) and sometimes non-metals (such as phosphorus) or metalloid ...

, where tin is a significant addition, and

brass Brass is an alloy of copper and zinc, in proportions which can be varied to achieve different colours and mechanical, electrical, acoustic and chemical properties, but copper typically has the larger proportion, generally copper and zinc. I ...

, using

zinc Zinc is a chemical element; it has symbol Zn and atomic number 30. It is a slightly brittle metal at room temperature and has a shiny-greyish appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic tabl ...

instead. Both of these are imprecise terms. Latten is a further term, mostly used for coins with a very high copper content. Today the term ''copper alloy'' tends to be substituted for all of these, especially by museums. Copper deposits are abundant in most parts of the world (globally 70 parts per million), and it has therefore always been a relatively cheap metal. By contrast, tin is relatively rare (2 parts per million), and in Europe and the

Mediterranean The Mediterranean Sea ( ) is a sea connected to the Atlantic Ocean, surrounded by the Mediterranean basin and almost completely enclosed by land: on the east by the Levant in West Asia, on the north by Anatolia in West Asia and Southern ...

region, and even in prehistoric times had to be traded considerable distances, and was expensive, sometimes virtually unobtainable. Zinc is even more common at 75 parts per million, but is harder to extract from its ores. Bronze with the ideal percentage of tin was therefore expensive and the proportion of tin was often reduced to save cost. The discovery and exploitation of the Bolivian tin belt in the 19th century made tin far cheaper, although forecasts for future supplies are less positive. There are as many as 400 different copper and copper alloy compositions loosely grouped into the categories: copper, high copper alloy, brasses, bronzes, cupronickel, copper–nickel–zinc (nickel silver), leaded copper, and special alloys.

Composition

The similarity in external appearance of the various alloys, along with the different combinations of elements used when making each alloy, can lead to confusion when categorizing the different compositions. The following table lists the principal alloying element for four of the more common types used in modern industry, along with the name for each type. Historical types, such as those that characterize the

Bronze Age The Bronze Age () was a historical period characterised principally by the use of bronze tools and the development of complex urban societies, as well as the adoption of writing in some areas. The Bronze Age is the middle principal period of ...

, are vaguer as the mixtures were generally variable. The following table outlines the chemical composition of various grades of copper alloys.

Brasses

A brass is an alloy of copper with zinc. Brasses are usually yellow in colour. The zinc content can vary between few % to about 40%; as long as it is kept under 15%, it does not markedly decrease corrosion resistance of copper. Brasses can be sensitive to selective leaching corrosion under certain conditions, when zinc is leached from the alloy (''dezincification''), leaving behind a spongy copper structure. * Nordic Gold

Bronzes

A bronze is an alloy of copper and other metals, most often tin, but also aluminium and silicon. * Aluminium bronzes are alloys of copper and aluminium. The content of aluminium ranges mostly between 5% and 11%. Iron, nickel, manganese and silicon are sometimes added. They have higher strength and corrosion resistance than other bronzes, especially in marine environment, and have low reactivity to sulphur compounds. Aluminium forms a thin passivation layer on the surface of the metal. * Bell metal * BrastilWoldman’s Engineering Alloys, 9th Edition 1936, American Society for Metals, *

Phosphor bronze A phosphor is a substance that exhibits the optical phenomenon, phenomenon of luminescence; it emits light when exposed to some type of radiant energy. The term is used both for fluorescence, fluorescent or phosphorescence, phosphorescent sub ...

* Nickel bronzes, e.g. nickel silver and cupronickel * Speculum metal * UNS C69100

Precious metal alloys

Copper is often alloyed with

precious metal Precious metals are rare, naturally occurring metallic chemical elements of high Value (economics), economic value. Precious metals, particularly the noble metals, are more corrosion resistant and less reactivity (chemistry), chemically reac ...

s like

gold Gold is a chemical element; it has chemical symbol Au (from Latin ) and atomic number 79. In its pure form, it is a brightness, bright, slightly orange-yellow, dense, soft, malleable, and ductile metal. Chemically, gold is a transition metal ...

(Au) and

silver Silver is a chemical element; it has Symbol (chemistry), symbol Ag () and atomic number 47. A soft, whitish-gray, lustrous transition metal, it exhibits the highest electrical conductivity, thermal conductivity, and reflectivity of any metal. ...

(Ag). † amount unspecified

References

Bibliography

* {{cite book , first1=Erik , last1=Oberg , first2=Franklin D. , last2=Jones , first3=Holbrook L. , last3=Horton , year=1992 , title=Machinery's Handbook , edition=24 , page=501 , publisher=Industrial Press Inc , location=New York , isbn=0-8311-2492-X

External links

Corrosion tests and standards: application and interpretationCopper Development Association
*Copper Binary Phase Diagrams generation code (batch file - http://www.gotrawama.eu/copperNIMS/ramefabio.txt ) using open thermodynamic databases available at NIMS https://cpddb.nims.go.jp/cpddb/periodic.htm and a commercial software, Computherm Pandat, available for free at https://computherm.com/ ( help for use https://computherm.com/docs/pandat_manual.pdf. Images of the 34 binary phase diagrams are available at http://www.gotrawama.eu/copperNIMS/PNG/ Copper alloys, Sculpture materials