{{more citations needed, date=January 2017 Knobs-for-climate-control

A control knob is a rotary device used to provide manual input adjustments to a mechanical/ electrical system when grasped and turned by a human operator, so that differing extent of knob rotation corresponds to different desired input. Control knobs are a simpler type of

input hardware In computing, an input device is a piece of equipment used to provide data and control signals to an information processing system, such as a computer or information appliance. Examples of input devices include keyboards, mouse, scanners, cameras ...

and one of the most common components in

control systems A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial ...

, and are found on all sorts of devices from taps and gas stoves to

optical microscope The optical microscope, also referred to as a light microscope, is a type of microscope that commonly uses visible light and a system of lenses to generate magnified images of small objects. Optical microscopes are the oldest design of micros ...

potentiometer A potentiometer is a three- terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. If only two terminals are used, one end and the wiper, it acts as a variable resistor or rheostat. The measuring instrum ...

radio tuner A tuner is a subsystem that receives radio frequency (RF) transmissions, such as FM broadcasting, and converts the selected carrier frequency and its associated bandwidth into a fixed frequency that is suitable for further processing, usually b ...

s and

digital camera A digital camera is a camera that captures photographs in digital memory. Most cameras produced today are digital, largely replacing those that capture images on photographic film. Digital cameras are now widely incorporated into mobile devic ...

s, as well as in aircraft cockpits.https://www.amazon.com/b?node=16412811

Operation

A control knob works by turning a shaft which connects to the component which produces the actual input. Common control components used include

variable capacitor A variable capacitor is a capacitor whose capacitance may be intentionally and repeatedly changed mechanically or electronically. Variable capacitors are often used in L/C circuits to set the resonance frequency, e.g. to tune a radio (therefo ...

s, and

rotary switch A rotary switch is a switch operated by rotation. These are often chosen when more than 2 positions are needed, such as a three-speed fan or a CB radio with multiple frequencies of reception or "channels". A rotary switch consists of a spin ...

es. An example where the knob does not produce a variation in an electrical signal may be found in many

toaster A toaster is a small electric appliance that uses radiant heat to brown sliced bread into toast. Types Pop-up toaster In pop-up or automatic toasters, a single vertical piece of bread is dropped into a slot on the top of the toaste ...

s, where the darkness knob moves the

thermostat A thermostat is a regulating device component which senses the temperature of a physical system and performs actions so that the system's temperature is maintained near a desired setpoint. Thermostats are used in any device or system tha ...

in such a way as to change the temperature at which it opens and releases the cooked toast. Some similar controls produce similar inputs using different geometry; for example, the knob may be replaced by a lever which is moved through an angle. Another example is the sliding controls which frequently replace knobs as level controls in audio equipment.

Feedback

The use of knobs is an important aspect of the design of user interfaces in these devices. Particular attention needs to be paid to the feedback to the operator from the adjustments being made. The use of a pointer on the knob in conjunction with a scale assists in producing repeatable settings; in other cases there may be a dial or other indicator which is either mechanically linked the knob's rotation (as in many older radio tuners) or which reports the behavior being controlled.

Examples

File:Knobs bakelite.jpg, various knobs, three of which incorporate pointers to indicate setting File:Potentiometer_knob_with_set_screw.jpg, the knob on the left turns the shaft of a potentiometer File:TASCAM_M-520_knobs.jpg, a control panel with knobs color-coded according to function File:Sony DSC-RX10 M4 - 01.jpg, digital camera lens with two control knobs

References

Control devices Human–machine interaction Electrical components