Common information
:''Unless otherwise indicated, all images are to scale.''Physical details
Note that a memory card's dimensions are determined while holding the card with contact pins upwards. The length of cards is often greater than their width. Most cards show a directional arrow to aid insertion; such an arrow should be upward.Speed comparison
Technical details
Consumer details
Compatibility
The following chart gives details on availability of adapters to put a given card (horizontal) in a given slot or device (vertical). This table does not take into account protocol issues in communicating with the device. Following labels are used: * + (native) – A slot is native for such card. * D (Directly compatible) – A card may be used in such a slot directly, without any adapters. Best possible compatibility. * M (requires a Mechanical adapter) – Such adapter is only a physical enclosure to fit one card sized into another; all electrical pins are exactly the same. * EM (requires an Electro-Mechanical adapter) – Such adapter features both physical enclosure and pins re-routing as terminals are sufficiently different. No powered elements in such adapter exists, thus they're very cheap and easy to manufacture and may be supplied as a bonus for every such card. * E (requires an Electronic adapter enclosure) – These adapters must have components—potentially requiring external power—that transform signals, as well as physical enclosure and pin routing. * X (requires an eXternal adapter) – Technically the same as E, but such adapter usually consists of 2 parts: a pseudo-card with pin routing and physical enclosure size that perfectly match the target slot and a break-out box (a card reader) that holds a real card. Such adapter is the least comfortable to use. * XM (requires an eXternal electro-mechanical adapter) – Technically the same as EM, but such adapter usually consists of 2 parts: a pseudo-card with pin routing and physical enclosure size that perfectly match the target slot and a break-out box (a card reader) that holds a real card. Such adapter is the least comfortable to use. * ''Empty cell'' – Card cannot be used in such slot, no single adapter is known to exist. Sometimes a chain of adapters can help (for example, miniSD→CF as miniSD→SD→CF).References
External links
* GumstixDocsWiki Frequently Asked Questions