HOME

TheInfoList



OR:

Anselm Franz (January 21, 1900—November 18, 1994) was a pioneering Austrian
jet engine A jet engine is a type of reaction engine, discharging a fast-moving jet (fluid), jet of heated gas (usually air) that generates thrust by jet propulsion. While this broad definition may include Rocket engine, rocket, Pump-jet, water jet, and ...
engineer Engineers, as practitioners of engineering, are professionals who Invention, invent, design, build, maintain and test machines, complex systems, structures, gadgets and materials. They aim to fulfill functional objectives and requirements while ...
known for the development of the
Jumo 004 The Junkers Jumo 004 was the world's first production turbojet engine in operational use, and the first successful axial compressor turbojet engine. Some 8,000 units were manufactured by Junkers in Germany late in World War II, powering the Mess ...
, the world's first mass-produced turbojet engine by
Nazi Germany Nazi Germany, officially known as the German Reich and later the Greater German Reich, was the German Reich, German state between 1933 and 1945, when Adolf Hitler and the Nazi Party controlled the country, transforming it into a Totalit ...
during
World War II World War II or the Second World War (1 September 1939 – 2 September 1945) was a World war, global conflict between two coalitions: the Allies of World War II, Allies and the Axis powers. World War II by country, Nearly all of the wo ...
, and his work on
turboshaft A turboshaft engine is a form of gas turbine that is optimized to produce shaft horsepower rather than jet thrust. In concept, turboshaft engines are very similar to turbojets, with additional turbine expansion to extract heat energy from the ex ...
designs in the
United States The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 U.S. state, states and a federal capital district, Washington, D.C. The 48 ...
after the war as part of
Operation Paperclip The Operation Paperclip was a secret United States intelligence program in which more than 1,600 German scientists, engineers, and technicians were taken from former Nazi Germany to the US for government employment after the end of World War I ...
, including the
Lycoming T53 The Lycoming T53, (company designation LTC-1) is a turboshaft engine used on helicopters and (as a turboprop) fixed-wing aircraft since the 1950s. It was designed at the Lycoming Turbine Engine Division in Stratford, Connecticut, by a team he ...
, the Honeywell T55, the AGT-1500, and the PLF1A-2, the world's first high-bypass turbofan engine.


Early life

Born in Schladming,
Austria Austria, formally the Republic of Austria, is a landlocked country in Central Europe, lying in the Eastern Alps. It is a federation of nine Federal states of Austria, states, of which the capital Vienna is the List of largest cities in Aust ...
, in 1900, Franz studied mechanical engineering at the Graz University of Technology and earned a doctoral degree from the
University of Berlin The Humboldt University of Berlin (, abbreviated HU Berlin) is a public research university in the central borough of Mitte in Berlin, Germany. The university was established by Frederick William III on the initiative of Wilhelm von Humbol ...
. Franz worked as a design engineer at a company in Berlin, where he developed hydraulic
torque converter A torque converter is a device, usually implemented as a type of fluid coupling, that transfers rotating power from a prime mover, like an internal combustion engine, to a rotating driven load. In a vehicle with an automatic transmission, the ...
s. In 1933 Franz joined the
Sturmabteilung The (; SA; or 'Storm Troopers') was the original paramilitary organisation under Adolf Hitler and the Nazi Party of Germany. It played a significant role in Adolf Hitler's rise to power, Hitler's rise to power in the 1920s and early 1930s. I ...
.


Junkers Aircraft

In 1936, he joined
Junkers Junkers Flugzeug- und Motorenwerke AG (JFM, earlier JCO or JKO in World War I, English language, English: Junkers Aircraft and Motor Works) more commonly Junkers , was a major German aircraft manufacturer, aircraft and aircraft engine manufactu ...
, and during much of the 1930s he was in charge of
supercharger In an internal combustion engine, a supercharger compresses the intake gas, forcing more air into the engine in order to produce more power for a given displacement (engine), displacement. It is a form of forced induction that is mechanically ...
and
turbocharger In an internal combustion engine, a turbocharger (also known as a turbo or a turbosupercharger) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake air, forcing more air into th ...
development. Meanwhile
Hans von Ohain Hans Joachim Pabst von Ohain (14 December 191113 March 1998) was a German physicist, engineer, and the designer of the first aircraft to use a turbojet engine. Together with Frank Whittle and Anselm Franz, he has been described as the co-invent ...
's first engines were being run at
Heinkel Heinkel Flugzeugwerke () was a German aircraft manufacturing company founded by and named after Ernst Heinkel. It is noted for producing bomber aircraft for the Luftwaffe in World War II and for important contributions to high-speed flight, wit ...
, although there was little official interest.
Helmut Schelp Helmut Schelp was the director of advanced engine development at the RLM's T-Amt technical division leading up to and during World War II. He used his office to fund a widespread program in jet engine development, which led to many of the engine ...
and Hans Mauch, at the Reichsluftfahrtministerium (RLM), tried to keep development moving through the "back door", attempting to interest existing engine companies in jet development. On one such visit in early 1939 Otto Mader at Junkers said that even if the idea was worth looking at, he had no one to run such an effort. Schelp suggested that Franz would be perfect for the job, given his experience in turbocompressor work. The program was set up later in 1939, initially consisting of a very small team drawn from the supercharger division. Unlike the Heinkel designs, the Jumo would use an
axial compressor An axial compressor is a gas compressor that can continuously pressurize gases. It is a rotating, airfoil-based compressor in which the gas or working fluid principally flows parallel to the axis of rotation, or axially. This differs from other ...
, as opposed to the
centrifugal compressor Centrifugal compressors, sometimes called impeller compressors or radial compressors, are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. They achieve pressure rise by adding energy to the continuous flow of fluid through th ...
, in order to have a smaller frontal area. With that exception the design was otherwise very conservative, a series of six flame cans were used for combustion instead of a single annular burner, and the
compression ratio The compression ratio is the ratio between the maximum and minimum volume during the compression stage of the power cycle in a piston or Wankel engine. A fundamental specification for such engines, it can be measured in two different ways. Th ...
was kept low at 3.14:1. Franz decided to focus on development time-to-market instead of performance in order to avoid having the program killed off if it didn't produce a working engine quickly. The first testbed run of the experimental 004A took place in the spring of 1940, and had full speed runs in January 1941. The engine flew on an
Messerschmitt Bf 110 The Messerschmitt Bf 110, often known unofficially as the Me 110,Because it was built before ''Bayerische Flugzeugwerke'' became Messerschmitt AG in July 1938, the Bf 110 was never officially given the designation Me 110. is a twin-engined (de ...
on March 15, 1942, and after a number of these A models were delivered, the
Messerschmitt Me 262 The Messerschmitt Me 262, nicknamed (German for "Swallow") in fighter versions, or ("Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the German aircraft manufacturer Messers ...
first took to the air with the 004A on July 18. The RLM was finally interested in the design, and ordered 80 production quality versions. The new 004B version included a number of changes, but ran into difficulty with vibration and fatigue problems that greatly delayed its service entry. It was not until the spring of 1944 that the engine was routinely lasting 50 hours and could enter full production. It nevertheless went on to power the majority of the
Luftwaffe The Luftwaffe () was the aerial warfare, aerial-warfare branch of the before and during World War II. German Empire, Germany's military air arms during World War I, the of the Imperial German Army, Imperial Army and the of the Imperial Ge ...
's jet designs.


Operation Paperclip

After the war Franz moved to the United States as part of
Operation Paperclip The Operation Paperclip was a secret United States intelligence program in which more than 1,600 German scientists, engineers, and technicians were taken from former Nazi Germany to the US for government employment after the end of World War I ...
, and worked for a time with the
USAF The United States Air Force (USAF) is the Air force, air service branch of the United States Department of Defense. It is one of the six United States Armed Forces and one of the eight uniformed services of the United States. Tracing its ori ...
on engine-related issues at
Wright-Patterson Air Force Base Wright-Patterson Air Force Base (WPAFB) is a United States Air Force base and census-designated place just east of Dayton, Ohio, in Greene County, Ohio, Greene and Montgomery County, Ohio, Montgomery counties. It includes both Wright and Patte ...
. He was known to still wear his long leather, military coat from Nazi Germany in the United States, with the Nazi insignia removed. In 1951 he was hired to set up a new turbine division at Lycoming's otherwise unused plant in
Stratford, Connecticut Stratford is a New England town, town in Fairfield County, Connecticut, United States. It is situated on Long Island Sound at the mouth of the Housatonic River. The town is part of the Greater Bridgeport Planning Region, Connecticut, Greater Bri ...
."The jet race and the Second World War"
Sterling Michael Pavelec. Greenwood Publishing Group, 2007. p. 171. , .
Here he decided to focus on engine areas not currently served by the larger companies (
General Electric General Electric Company (GE) was an American Multinational corporation, multinational Conglomerate (company), conglomerate founded in 1892, incorporated in the New York (state), state of New York and headquartered in Boston. Over the year ...
and
Pratt & Whitney Pratt & Whitney is an American aerospace manufacturer with global service operations. It is a subsidiary of RTX Corporation (formerly Raytheon Technologies). Pratt & Whitney's aircraft engines are widely used in both civil aviation (especially ...
), eventually settling on
helicopter A helicopter is a type of rotorcraft in which Lift (force), lift and thrust are supplied by horizontally spinning Helicopter rotor, rotors. This allows the helicopter to VTOL, take off and land vertically, to hover (helicopter), hover, and ...
engines. His first design, the T53, would go on to be one of the most popular
turboshaft A turboshaft engine is a form of gas turbine that is optimized to produce shaft horsepower rather than jet thrust. In concept, turboshaft engines are very similar to turbojets, with additional turbine expansion to extract heat energy from the ex ...
engines in history, powering the
Bell Aircraft The Bell Aircraft Corporation was an American aircraft manufacturer, a builder of several types of fighter aircraft for World War II but most famous for the Bell X-1, the first supersonic aircraft, and for the development and production of many i ...
UH-1 Huey and AH-1 Cobra helicopters, and the OV-1 Mohawk ground attack aircraft. He followed this success with the larger T55, later converting it into a small
turbofan A turbofan or fanjet is a type of airbreathing jet engine that is widely used in aircraft engine, aircraft propulsion. The word "turbofan" is a combination of references to the preceding generation engine technology of the turbojet and the add ...
engine as well. In the 1960s he led development of a new design for
tank A tank is an armoured fighting vehicle intended as a primary offensive weapon in front-line ground combat. Tank designs are a balance of heavy firepower, strong armour, and battlefield mobility provided by tracks and a powerful engine; ...
use, which developed into the AGT-1500, used on the
M1 Abrams The M1 Abrams () is a third-generation American main battle tank designed by Chrysler Defense (now General Dynamics Land Systems) and named for General Creighton Abrams. Conceived for modern armored ground warfare, it is one of the heavies ...
.


Retirement

Franz retired from Lycoming in 1968, having risen to vice president and assistant general manager. He died in 1994, holder of the U.S. Army Outstanding Civilian Service Medal, the R. Tom Sawyer Award from the
American Society of Mechanical Engineers The American Society of Mechanical Engineers (ASME) is an American professional association that, in its own words, "promotes the art, science, and practice of multidisciplinary engineering and allied sciences around the globe" via "continuing edu ...
, the Austrian Decoration of Honour for Science and Art, and the Grand Decoration of Honour in Gold with Star for Services to the Republic of Austria.List of holders of Austrian decorations of honour
/ref>


References

{{DEFAULTSORT:Franz, Anselm 20th-century Austrian engineers Sturmabteilung personnel American engineers 1900 births 1994 deaths