|
Loom
A loom is a device used to weaving, weave cloth and tapestry. The basic purpose of any loom is to hold the Warp (weaving), warp threads under tension (mechanics), tension to facilitate the interweaving of the weft threads. The precise shape of the loom and its mechanics may vary, but the basic function is the same. Etymology and usage The word "loom" derives from the Old English ''geloma'', formed from ''ge-'' (perfective prefix) and ''loma'', a root of unknown origin; the whole word ''geloma'' meant a utensil, tool, or machine of any kind. In 1404 "lome" was used to mean a machine to enable weaving thread into cloth. By 1838 "loom" had gained the additional meaning of a machine for interlacing thread. Components and actions Basic structure File:Simple_treadle_floorloom,_line_drawing.png, upright=1.5, left, A simple treadle floor loom. Mouse over components for pop-up links. The warp runs horizontally. On the left the warp beam, held from turning by with a weighted trough t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pin Loom
Pin weaving is a form of small-scale weaving traditionally done on a frame made of pins; the warp and weft are wrapped around the pins. Pin-woven textiles have a selvage edge all the way around. Pin looms were popular from the 1930s to the 1960s. Quite elaborate patterns were published, especially in the 1930s. 21st-century designs often focus more on the fiber than on elaborate patterning; for instance, yarns with precisely repeating colours can be used to make plaids. Equipment The equipment needed is minimal, consisting of pins, a pinnable board, and a bodkin needle. It can also be done on some types of knitting frame. There are also commercial looms made for pin weaving. Smooth, rounded pin tops are desirable; they don't snag the yarn or fingers. Pins are usually spaced apart. 4-8 pins per inch (3-6 pins every two centimeters), The pins may be numbered (with numbers written beside the pins), and the lower-left corner may be marked, for ease of reference when working pa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Weaving
Weaving is a method of textile production in which two distinct sets of yarns or threads are interlaced at right angles to form a fabric or cloth. Other methods are knitting, crocheting, felting, and braiding or plaiting. The longitudinal threads are called the warp and the lateral threads are the weft, woof, or filling. The method in which these threads are interwoven affects the characteristics of the cloth. Cloth is usually woven on a loom, a device that holds warp threads in place while filling threads are woven through them. A fabric band that meets this definition of cloth (warp threads with a weft thread winding between) can also be made using other methods, including tablet weaving, back strap loom, or other techniques that can be done without looms. The way the warp and filling threads interlace with each other is called the weave. The majority of woven products are created with one of three basic weaves: plain weave, satin weave, or twill weave. Woven cl ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
WEAVING WITH A PIN (cropped)
Weaving is a method of textile production in which two distinct sets of yarns or threads are interlaced at right angles to form a fabric or cloth. Other methods are knitting, crocheting, felting, and braiding or plaiting. The longitudinal threads are called the warp and the lateral threads are the weft, woof, or filling. The method in which these threads are interwoven affects the characteristics of the cloth. Cloth is usually woven on a loom, a device that holds warp threads in place while filling threads are woven through them. A fabric band that meets this definition of cloth (warp threads with a weft thread winding between) can also be made using other methods, including tablet weaving, back strap loom, or other techniques that can be done without looms. The way the warp and filling threads interlace with each other is called the weave. The majority of woven products are created with one of three basic weaves: plain weave, satin weave, or twill weave. Woven cloth c ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tapestry
Tapestry is a form of Textile arts, textile art which was traditionally Weaving, woven by hand on a loom. Normally it is used to create images rather than patterns. Tapestry is relatively fragile, and difficult to make, so most historical pieces are intended to hang vertically on a wall (or sometimes in tents), or sometimes horizontally over a piece of furniture such as a table or bed. Some periods made smaller pieces, often long and narrow and used as borders for other textiles. Most weavers use a natural warp thread, such as wool, linen, or cotton. The warp and weft, weft threads are usually wool or cotton but may include silk, gold, silver, or other alternatives. In Late Middle Ages, late medieval Europe, tapestry was the grandest and most expensive medium for figurative images in two dimensions, and despite the rapid rise in importance of painting it retained this position in the eyes of many Renaissance patrons until at least the end of the 16th century, if not beyond. Th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Peg Loom
A peg loom is a simple weaving loom. Handheld weaving sticks use the same principle. A peg loom is a board, usually wooden, with one or more rows of holes, and a set of wooden or nylon pegs which fit into these holes. Each peg is a dowel with a hole drilled along its diameter near one end. Handheld weaving sticks are similar to the pegs, but tapered at the hole end and pointed at the other end. Plastic looms are also made for the educational market. Double-length warp threads are threaded through the hole in each peg or stick, and the loose ends knotted. The pegs are inserted into the loom, or the sticks are handheld, and the weft thread is woven around the pegs or sticks. As the work progresses, it is slid off the pegs or sticks onto the trailing warp threads. Different yarns can be used to create patterns, and when using sticks a curved piece of work can be created by weaving less often round certain sticks. Looms are made in a range of sizes. As an example, one English compan ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Heddle
A heddle or heald is an integral part of a loom. Each thread in the warp passes through a heddle,"Weaving." ''The Encyclopædia Britannica''. 11th ed. 1911. which is used to separate the warp threads for the passage of the weft."Heddle." ''The Oxford English Dictionary''. 2nd ed. 1989. The typical heddle is made of cord or wire and is suspended on a shaft of a loom. Each heddle has an eye in the center where the warp is threaded through. As there is one heddle for each thread of the warp, there can be near a thousand heddles used for fine or wide warps. A handwoven tea-towel will generally have between 300 and 400 warp threads and thus use that many heddles. In weaving, the warp threads are moved up or down by the shaft. This is achieved because each thread of the warp goes through a heddle on a shaft. When the shaft is raised the heddles are too, and thus the warp threads threaded through the heddles are raised. Heddles can be either equally or unequally distributed on the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Beater (weaving)
A beater or batten, is a weaving tool designed to push the weft yarn securely into place. In small hand weaving such as Inkle weaving and tablet weaving the beater may be combined with the shuttle into a single tool. In rigid heddle looms the beater is combined with the heddles. Beaters appear both in a hand-held form, and as an integral part of a loom. Hand beaters must have enough mass to force the weaving into place, so they come in a variety of weights and sizes. Some may have lead inserts to provide additional heft for a smaller beater, and some are made entirely from metal. Loom beaters typically take the form of a bar mounted across the loom. The actual beating is done by a metal insert known as a reed, which contains a number of slots, known as dents, which the warp threads pass through. This is the more common form, as floor looms and mechanized looms both use a beater with a reed. File:Salish Baton.JPG, Coast Salish sword beater, North American west coast File:Gr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Shed (weaving)
In weaving, the shed is the temporary separation between upper and lower warp yarns through which the weft is woven. The shed is created to make it easy to interlace the weft into the warp and thus create woven fabric. Most types of looms have some sort of device which separates some of the warp threads from the others. This separation is called the shed, and allows for a shuttle carrying the weft thread to move through the shed perpendicular to the warp threads. Which threads are raised and which are lowered are changed after each pass of the shuttle. The process of weaving can be simplified to a series of four steps: the shed is raised, the shuttle is passed through, the shed is closed, and the weft thread is beaten into place. These steps are then repeated, with a different set of threads being raised so as to interlace the warp and weft. The term ''shedding'' refers to the action of creating a shed. A ''shedding device'' is the device used to raise or open the shed. Cr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Warp (weaving)
In the manufacture of cloth, warp and weft are the two basic components in weaving to transform thread and yarn into textile fabrics. The vertical ''warp'' yarns are held stationary in tension on a loom (frame) while the horizontal ''weft'' (also called the ''woof'') is drawn through (inserted over and under) the warp thread. In the terminology of weaving, each warp thread is called a ''warp end''; a ''pick'' is a single weft thread that crosses the warp thread (synonymous terms are ''fill yarn'' and ''filling yarn'').Burnham (1980), pp. 170, 179Barber (1991), p. 79. In the 18th century, the Industrial Revolution facilitated the industrialisation of the production of textile fabrics with the "picking stick" and the " flying shuttle", the latter of which was invented by John Kay, in 1733. The mechanised power loom was patented by Edmund Cartwright in 1785, which allowed sixty picks per minute. Etymology The word ''weft'' derives from the Old English word , to weave. ''Wa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Weft
In the manufacture of cloth, warp and weft are the two basic components in weaving to transform thread (yarn), thread and yarn into textile fabrics. The vertical ''warp'' yarns are held stationary in tension on a loom (frame) while the horizontal ''weft'' (also called the ''woof'') is drawn through (inserted over and under) the warp thread. In the terminology of weaving, each warp thread is called a ''warp end''; a ''pick'' is a single weft thread that crosses the warp thread (synonymous terms are ''fill yarn'' and ''filling yarn'').Burnham (1980), pp. 170, 179Barber (1991), p. 79. In the 18th century, the Industrial Revolution facilitated the industrialisation of the production of textile fabrics with the "picking stick" and the "flying shuttle", the latter of which was invented by John Kay (flying shuttle), John Kay, in 1733. The mechanised power loom was patented by Edmund Cartwright in 1785, which allowed sixty picks per minute. Etymology The word ''weft'' derives from ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Ratchet (device)
A ratchet (occasionally spelled rachet) is a mechanical device that allows continuous linear or rotary motion in only one direction while preventing motion in the opposite direction. Ratchets are widely used in machinery and tools. The word ''ratchet'' is also used informally to refer to a ratcheting socket wrench. __TOC__ Theory of operation A ratchet consists of a round gear or a linear rack with teeth, and a pivoting, spring-loaded finger called a '' pawl'' (or ''click'', in clocks and watches) that engages the teeth. The teeth are uniform but are usually asymmetrical, with each tooth having a moderate slope on one edge and a much steeper slope on the other edge. When the teeth are moving in the unrestricted (i.e. forward) direction, the pawl easily slides up and over the gently sloped edges of the teeth, with a spring forcing it (often with an audible 'click') into the depression between the teeth as it passes the tip of each tooth. When the teeth move in the oppo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Museum Het Leids Wevershuis
Museum Het Leids Wevershuis consists of one of the last remaining "weavers' homes" in Leiden, Netherlands. Built around 1560, the exterior, the large antique loom (1830) and the interior, are testimony of the once flourishing textile industry (and trade) around Leiden, in particular during the 16th and 17th century, when many home weavers supplied the draper's guild with high quality woolen cloth. Museum The building and its antique interior are the museum. There is a small collection of modern hand-woven textiles. The museum has a weaver available most days to demonstrate the craft on a large loom A loom is a device used to weaving, weave cloth and tapestry. The basic purpose of any loom is to hold the Warp (weaving), warp threads under tension (mechanics), tension to facilitate the interweaving of the weft threads. The precise shape of .... Products made during demonstrations are for sale. The museum is a short walking distance from the old Draper's guild, part of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
