Zakspeed 841

The Zakspeed 841 was the first Formula One car built and raced by the German Zakspeed team for the season. Lead driver was British driver Jonathan Palmer with Formula 3000 driver Christian Danner from Germany joining the team later in the season. The 841 was designed by Paul Brown.

Concept

Zakspeed was already an established racing and tuning company, working in conjunction with Ford. The team decided to enter Formula One in with their own turbo-charged engine; the factory-backed Alfa Romeo, Ferrari, and Renault teams were the only other outfits to build both their chassis and engines at this time. It was the first all-German (engine and chassis) F1 car since the Porsche 804 in . The small size of the team limited it to building just two chassis during the course of the season, which also meant that only one car would be entered for contested events. For financial reasons, the team would not travel out of Europe, limiting itself to a maximum of eleven out of the sixteen Grands Prix. The 841 was designed by Paul Brown, with the 4-in-line engine designed by Norbert Kreyer. Two chassis were built, with the second only being finished in time for the French Grand Prix, the seventh round of the championship. The finished package was generally agreed to be neat and tidy (if conventional), especially in the red-and-white corporate colours of West, the team's title sponsor.

The car's designation of "841" shows that the car itself was already behind the times when it started. The 841 was intended to be used by Zakspeed for their entry into Formula One in the season. However, the project fell behind due to a lack of funds and only began competing in 1985.

Zakspeed's own turbo engine, reportedly based on a Ford block, produced approximately in race trim and for qualifying during the 1985 season.Zakspeed turbo F1 engine at gurneyflap.com
/ref> This generally put them behind the leading engines of BMW, Ferrari, Renault, Honda and the Porsche built TAG which were producing around and sometimes over in qualifying while having around 900+ bhp for races. However the 1500/4 did develop more power than the straight-4 Hart turbo, the Motori Moderni V6 and the Alfa Romeo 890T V8.

Racing history

Zakspeed's plan for 1985 was more a toe in the water exercise. The team only raced in the rounds of the championship which were held in Europe. Zakspeed did not enter for the fly away races in Brazil, Canada, USA, South Africa and Australia.

The Zakspeed team made its début with the 841 in the second race of the season at the 1985 Portuguese Grand Prix, having missed the opening race in Brazil. Former RAM driver Jonathan Palmer drove the car and took 23rd place in qualifying. In the race, however, he collided with Williams' Keke Rosberg at the start, terminally damaging the suspension. At the next race in San Marino, Palmer qualified a highly respectable 17th, but failed to take the start with an engine misfire. The following race at Monaco brought the 841 its first finish in 11th place. However, this would be the team's only finish in 1985, as a series of mechanical problems led to Palmer retiring from the next five consecutive races in which he took part.

The car's performance also failed to improve, with Palmer consistently qualifying outside the top twenty. The team was then forced to miss the Italian GP after Palmer broke his leg in a sports car accident at Spa, but managed to compete in two further races with the 1985 Formula 3000 champion Christian Danner taking his place.

As the final two races of the season were outside Europe, Zakspeed did not take part and turned its attention to designing and building the 861 chassis for the season.

Complete Formula One results

( key)

References

;Books
*
*
;Websites
*
*

{{Zakspeed

1985 Formula One season cars
Zakspeed Formula One cars