X.28 is an
ITU-T
The ITU Telecommunication Standardization Sector (ITU-T) is one of the three sectors (divisions or units) of the International Telecommunication Union (ITU). It is responsible for coordinating standards for telecommunications and Information Co ...
standard specifying the interface between
asynchronous
Asynchrony is the state of not being in synchronization.
Asynchrony or asynchronous may refer to:
Electronics and computing
* Asynchrony (computer programming), the occurrence of events independent of the main program flow, and ways to deal wit ...
character-mode
data terminal equipment
Data terminal equipment (DTE) is an end instrument that converts user information into signals or reconverts received signals. These can also be called tail circuits. A DTE device communicates with the data circuit-terminating equipment (DCE) ...
(DTE), such as
computer terminal
A computer terminal is an electronic or electromechanical hardware device that can be used for entering data into, and transcribing data from, a computer or a computing system. The teletype was an example of an early-day hard-copy terminal and ...
s, and a
Packet Assembler/Disassembler (PAD) that connects the DTE to a
packet switched network
In telecommunications, packet switching is a method of grouping data into '' packets'' that are transmitted over a digital network. Packets are made of a header and a payload. Data in the header is used by networking hardware to direct the pack ...
such as an
X.25
X.25 is an ITU-T standard protocol suite for packet-switched data communication in wide area networks (WAN). It was originally defined by the International Telegraph and Telephone Consultative Committee (CCITT, now ITU-T) in a series of drafts a ...
network.
External links
X.28 standard at ITU site
ITU-T recommendations
ITU-T X Series Recommendations
{{Telecomm-stub