Wing & Mahurin on:
[Wikipedia]
[Google]
[Amazon]
A wing is a type of fin that produces Lift (force), lift while moving through air or some other fluid. Accordingly, wings have Streamlines, streaklines, and pathlines, streamlined Cross section (geometry), cross-sections that are subject to aerodynamic forces and act as airfoils. A wing's Aerodynamics, aerodynamic efficiency is expressed as its lift-to-drag ratio. The lift a wing generates at a given speed and angle of attack can be one to two order of magnitude, orders of magnitude greater than the total drag (physics), drag on the wing. A high lift-to-drag ratio requires a significantly smaller thrust to propel the wings through the air at sufficient lift.
Lifting structures used in water include various Foil (fluid mechanics), foils, such as hydrofoils. Hydrodynamics is the governing science, rather than aerodynamics. Applications of underwater foils occur in Hydroplane (boat), hydroplanes, sailboats and submarines.
The design and analysis of the wings of aircraft is one of the principal applications of the science of aerodynamics, which is a branch of fluid mechanics. In principle, the properties of the airflow around any moving object can be found by solving the Navier-Stokes equations of fluid dynamics. However, except for simple geometries these equations are notoriously difficult to solve and simpler equations are used.
For a wing to produce ''lift'', it must be oriented at a suitable angle of attack. When this occurs, the wing deflects the airflow downwards as it passes the wing. Since the wing exerts a force on the air to change its direction, the air must also exert an equal and opposite force on the wing."The cause of the aerodynamic lifting force is the downward acceleration of air by the airfoil..."
PDF
/ref> For flight speeds near the speed of sound (transonic flight), airfoils with complex asymmetrical shapes are used to minimize the drastic increase in drag associated with airflow near the speed of sound. Such airfoils, called supercritical airfoils, are flat on top and curved on the bottom.
Aircraft wings may feature some of the following:
* A rounded leading edge cross-section
* A sharp trailing edge cross-section
* Leading-edge devices such as leading edge slats, slats, leading edge slot, slots, or leading edge extension, extensions
* Trailing-edge devices such as flap (aircraft), flaps or flaperons (combination of flaps and ailerons)
* Winglets to keep wingtip vortices from increasing drag and decreasing lift
* Dihedral (aeronautics), Dihedral, or a positive wing angle to the horizontal, increases ''spiral stability'' around the roll axis, whereas ''anhedral'', or a negative wing angle to the horizontal, decreases spiral stability.
Aircraft wings may have various devices, such as flaps or slats that the pilot uses to modify the shape and surface area of the wing to change its operating characteristics in flight.
* Ailerons (usually near the wingtips) to roll the aircraft clockwise or counterclockwise about its long axis
* Spoiler (aeronautics), Spoilers on the upper surface to disrupt the lift and to provide additional traction to an aircraft that has just landed but is still moving.
* Vortex generators mitigate flow separation at low speeds and high angles of attack, especially over control surfaces.
* Wing fences to keep flow attached to the wing by stopping boundary layer separation from spreading roll direction.
* Folding wings allow more aircraft storage in the confined space of the hangar, hangar deck of an aircraft carrier
* Variable-sweep wing or "swing wings" that allow outstretched wings during low-speed flight (i.e., take-off and landing) and swept wing, swept back wings for high-speed flight (including supersonic flight), such as in the F-111 Aardvark, the F-14 Tomcat, the Panavia Tornado, the MiG-23, the MiG-27, the Tu-160 and the B-1B Lancer warplanes
* Strake (aeronautics), Strakes to improve flight characteristics
* Chine (aeronautics), Chine, which may blend into the wing
* Leading-edge droop flap, a high-lift device
* Aircraft fairing, Fairings, structures whose primary function is to produce a smooth outline and reduce drag. For example, flap track fairings
Wings may have other Wing configuration#Minor independent surfaces, minor independent surfaces.
File:PSM V19 D181 Various seeds of trees.jpg, Winged tree seeds that cause Autorotation (helicopter), autorotation in descent
File:Seagull wing.jpg, A laughing gull, exhibiting the "gull wing" outline
File:PikiWiki_Israel_11327_Wildlife_and_Plants_of_Israel-Bat-003.jpg, Bat in flight
How Wings Work - Holger Babinsky Physics Education 2003
Demystifying the Science of Flight
– Audio segment on NPR's Talk of the Nation Science Friday
Flight of the StyroHawk wing
{{Authority control Aerodynamics Aerospace technologies Aircraft wing components Bird anatomy Bird flight Insect anatomy Mammal anatomy es:Ala (zoología)
A wing is a type of fin that produces Lift (force), lift while moving through air or some other fluid. Accordingly, wings have Streamlines, streaklines, and pathlines, streamlined Cross section (geometry), cross-sections that are subject to aerodynamic forces and act as airfoils. A wing's Aerodynamics, aerodynamic efficiency is expressed as its lift-to-drag ratio. The lift a wing generates at a given speed and angle of attack can be one to two order of magnitude, orders of magnitude greater than the total drag (physics), drag on the wing. A high lift-to-drag ratio requires a significantly smaller thrust to propel the wings through the air at sufficient lift.
Lifting structures used in water include various Foil (fluid mechanics), foils, such as hydrofoils. Hydrodynamics is the governing science, rather than aerodynamics. Applications of underwater foils occur in Hydroplane (boat), hydroplanes, sailboats and submarines.
Etymology and usage
For many centuries, the word "wing", from the Old Norse ''vængr'', referred mainly to the foremost limb (anatomy), limbs of birds (in addition to the architectural aisle). But in recent centuries the word's meaning has extended to include lift producing appendages of insect wing, insects, bats, pterosaurs, boomerangs, Wingsail, some sail boats and aircraft, or the Glossary_of_motorsport_terms#W, inverted airfoil on a automobile racing, race car that generates a downforce, downward force to increase traction.Aerodynamics
The design and analysis of the wings of aircraft is one of the principal applications of the science of aerodynamics, which is a branch of fluid mechanics. In principle, the properties of the airflow around any moving object can be found by solving the Navier-Stokes equations of fluid dynamics. However, except for simple geometries these equations are notoriously difficult to solve and simpler equations are used.
For a wing to produce ''lift'', it must be oriented at a suitable angle of attack. When this occurs, the wing deflects the airflow downwards as it passes the wing. Since the wing exerts a force on the air to change its direction, the air must also exert an equal and opposite force on the wing."The cause of the aerodynamic lifting force is the downward acceleration of air by the airfoil..."
Cross-sectional shape
An ''airfoil'' (American English) or ''aerofoil'' (British English) is the shape of a wing, blade (of a Propeller (aeronautics), propeller, Helicopter rotor, rotor, or turbine), or sail (as seen in Multiview orthographic projection#Section, cross-section). Wings with an asymmetrical cross section are the norm in subsonic flight. Wings with a symmetrical cross section can also generate lift by using a positive angle of attack to deflect air downward. Symmetrical airfoils have higher Stall (flight), stalling speeds than Camber (aerodynamics), cambered airfoils of the same wing area but are used in aerobatic aircraft as they provide practical performance whether the aircraft is upright or inverted. Another example comes from sailboats, where the sail is a thin membrane with no path-length difference between one side and the other."...consider a sail that is nothing but a vertical wing (generating side-force to propel a yacht). ...it is obvious that the distance between the stagnation point and the trailing edge is more or less the same on both sides. This becomes exactly true in the absence of a mast—and clearly the presence of the mast is of no consequence in the generation of lift. ''Thus, the generation of lift does not require different distances around the upper and lower surfaces.''" Holger Babinsky ''How do Wings Work?'' Physics Education November 2003/ref> For flight speeds near the speed of sound (transonic flight), airfoils with complex asymmetrical shapes are used to minimize the drastic increase in drag associated with airflow near the speed of sound. Such airfoils, called supercritical airfoils, are flat on top and curved on the bottom.
Design features
Aircraft wings may feature some of the following:
* A rounded leading edge cross-section
* A sharp trailing edge cross-section
* Leading-edge devices such as leading edge slats, slats, leading edge slot, slots, or leading edge extension, extensions
* Trailing-edge devices such as flap (aircraft), flaps or flaperons (combination of flaps and ailerons)
* Winglets to keep wingtip vortices from increasing drag and decreasing lift
* Dihedral (aeronautics), Dihedral, or a positive wing angle to the horizontal, increases ''spiral stability'' around the roll axis, whereas ''anhedral'', or a negative wing angle to the horizontal, decreases spiral stability.
Aircraft wings may have various devices, such as flaps or slats that the pilot uses to modify the shape and surface area of the wing to change its operating characteristics in flight.
* Ailerons (usually near the wingtips) to roll the aircraft clockwise or counterclockwise about its long axis
* Spoiler (aeronautics), Spoilers on the upper surface to disrupt the lift and to provide additional traction to an aircraft that has just landed but is still moving.
* Vortex generators mitigate flow separation at low speeds and high angles of attack, especially over control surfaces.
* Wing fences to keep flow attached to the wing by stopping boundary layer separation from spreading roll direction.
* Folding wings allow more aircraft storage in the confined space of the hangar, hangar deck of an aircraft carrier
* Variable-sweep wing or "swing wings" that allow outstretched wings during low-speed flight (i.e., take-off and landing) and swept wing, swept back wings for high-speed flight (including supersonic flight), such as in the F-111 Aardvark, the F-14 Tomcat, the Panavia Tornado, the MiG-23, the MiG-27, the Tu-160 and the B-1B Lancer warplanes
* Strake (aeronautics), Strakes to improve flight characteristics
* Chine (aeronautics), Chine, which may blend into the wing
* Leading-edge droop flap, a high-lift device
* Aircraft fairing, Fairings, structures whose primary function is to produce a smooth outline and reduce drag. For example, flap track fairings
Wings may have other Wing configuration#Minor independent surfaces, minor independent surfaces.
Applications and variants
Besides fixed-wing aircraft, applications for wing shapes include: * Hang gliders, which use wings ranging from fully flexible (paragliders, gliding parachutes), flexible (framed sail wings), to rigid * Kite types, Kites, which use a variety of surfaces to attain lift and maintain stability * Free flight (model aircraft), Flying model airplanes * Helicopters, which use a rotating wing with a variable pitch angle to provide directional forces * Propellers, whose blades generate lift for propulsion. * The NASA Space Shuttle, which uses its wings only to glide during its descent to a runway. These types of aircraft are called spaceplanes. * Some racing cars, especially Formula One cars, which use upside-down wings (or ''airfoils'') to provide greater traction at high speeds. * Sailboats, which use Sailcloth, flexible cloth sails as vertical wings with variable fullness and direction to move across water. * Hydrofoils, which use rigid wing shaped structures to lift a vessel out of the water to reduce drag and increase speed.In nature
In nature, wings have evolution, evolved in insects, pterosaurs, dinosaurs (birds), and mammals (bats) as a means of Animal locomotion, locomotion. Various species of penguins and other flighted or flightless bird, flightless water birds such as auks, cormorants, guillemots, shearwaters, eider duck, eider and scoter ducks and diving petrels are avid swimmers, and use their wings to propel through water.
;Wing forms in nature
Tensile structures
In 1948, Francis Rogallo invented a kite-like Rogallo wing, tensile wing supported by inflated or rigid struts, which ushered in new possibilities for aircraft. Near in time, Domina Jalbert invented flexible un-sparred ram-air airfoiled thick wings. These two new branches of wings have been since extensively studied and applied in new branches of aircraft, especially altering the personal recreational aviation landscape.See also
* Flight Natural world: * Bat flight * Bird flight * Flight feather * Flying and gliding animals * Insect flight * List of soaring birds * Samara (fruit), Samara (winged seeds of trees) Aviation: * Aircraft * Blade solidity * FanWing and Flettner airplane (experimental wing types) * Flight dynamics (fixed-wing aircraft) * Kite types * Ornithopter – Flapping-wing aircraft (research prototypes, simple toys and models) * Otto Lilienthal * Wing configuration * Wing root * Wingsuit flying Sailing: * Sails * Forces on sails * WingsailReferences
External links
How Wings Work - Holger Babinsky Physics Education 2003
– Audio segment on NPR's Talk of the Nation Science Friday
Flight of the StyroHawk wing
{{Authority control Aerodynamics Aerospace technologies Aircraft wing components Bird anatomy Bird flight Insect anatomy Mammal anatomy es:Ala (zoología)