Walking Excavator
   HOME

TheInfoList



OR:

A walking excavator or popularly spider excavator is a special type of all-terrain excavator. Like the regular excavator it consists of a boom, stick,
bucket A bucket is typically a watertight, vertical cylinder or truncated cone or square, with an open top and a flat bottom, attached to a semicircular carrying handle called the ''bail''. A bucket is usually an open-top container. In contrast, a ...
and cab on a rotating platform known as the "house". However, its house sits atop an undercarriage consisting of leg or arm-like extensions with or without wheels. All extensions can move in increments, hence the name ''walking excavator''. This is different from an early 20th century
dragline excavator A dragline excavator is a piece of heavy equipment used in civil engineering and surface mining. Draglines fall into two broad categories: those that are based on standard, lifting cranes, and the heavy units which have to be built on-site. Mo ...
where a set of feet plate are alternately lifted and lowered.


History

Most traditional excavators have tracks or wheels as undercarriage, limiting their usability on steep inclines, uneven terrain or inaccessible positions. In 1966, Edwin Ernst Menzi (1897–1984) and Joseph Kaiser (1928–1993) together invented the walking excavator for work on mountain slopes. Subsequently, Kaiser AG, Schaanwald,
Liechtenstein Liechtenstein (), officially the Principality of Liechtenstein (german: link=no, Fürstentum Liechtenstein), is a German-speaking microstate located in the Alps between Austria and Switzerland. Liechtenstein is a semi-constitutional monarch ...
, and Menzi Muck AG, Kriessern, Switzerland, developed excavators separately.''Walking Excavator and Mobility''
Unusual off-road locomotion website, September 2010
Despite the advantages of the design, it failed to be widely used for a number of reasons, including the relatively small gain in mobility; the fact that most excavation is done in urban areas; and costliness, both of the electro-hydraulic controls and of maintenance. The walking excavator is still not well known to the general public.''Unusual spider excavator, the Swiss-made Menzi Muck excavator, crawls on the hillside at Farm World''
Glenn Mulcaster, Machine The Weekly Times, April 2, 2014
Today, only walking excavators and forest harvesters, such as the Ecolog forest harvester or the TimberPro tilt cab, are designed to move and work in mountains.


Economic success

In 2007, Kaiser AG, Schaanwald, Liechtenstein, realized a turnover of nearly 60 million Swiss francs. In 2013, Menzi Muck AG had a turnover of 56.93 million Swiss francs.''Geschäftsbericht 2013''
annual report, Menzi Muck, 2013
In 2014, Kaiser AG had a turnover of 70 million Swiss francs.'' Unternehmer im Gespräch mit Studierenden''
Julius Rößner, Universität Liechtenstein, March 7, 2014


Design

The walking excavator's main feature is the ability to move in a crab- or spider-like fashion and hence overcome any terrain obstacle. The undercarriage design varies widely from model to model and between specialized roles. The number of legs or wheels can also vary from three (Menzi Muck 5000T2) to four. The leg design can also vary from fixed to telescoping. Most walking excavators now have rotating or powered wheels, allowing them to roll or drive depending on the need. Often the boom is also employed in moving, for example to overcome gaps that are wider than the reach of the excavator's legs.


See also

*
Harvester (forestry) A harvester is a type of heavy forestry vehicle employed in cut-to-length logging operations for felling, delimbing and bucking trees. A forest harvester is typically employed together with a forwarder that hauls the logs to a roadside l ...


References

{{reflist, 2


External links


Kaiser AG website

Menzi Muck AG website
Engineering vehicles Excavators