Trauzl lead block test on:
[Wikipedia]
[Google]
[Amazon]
The Trauzl lead block test, also called the Trauzl test, or just Trauzl, is a test used to measure the strength of explosive materials. It was developed by Isidor Trauzl in 1885.
The test is performed by loading a 10-gram foil-wrapped sample of the explosive into a hole drilled into a
Explosive power of chemical explosives by Trauzl number:
The test is performed by loading a 10-gram foil-wrapped sample of the explosive into a hole drilled into a lead
Lead is a chemical element with the symbol Pb (from the Latin ) and atomic number 82. It is a heavy metal that is denser than most common materials. Lead is soft and malleable, and also has a relatively low melting point. When freshly cu ...
block with specific dimensions and properties (a soft lead cylinder, 200 mm diameter and 200 mm high, with the hole 125 mm deep, and 25 mm diameter). The hole is then topped up with sand, and the sample is detonated electrically. After detonation, the volume increase of the cavity is measured. The result, given in cm3, is called the Trauzl number of the explosive.
The Trauzl test is not useful for some modern higher-powered explosives as their power often cracks or otherwise ruptures the lead block, leaving no hole to measure.
A variant of the test uses an aluminium
Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. I ...
block to avoid exposure of participants to lead-related hazards.
Examples
Explosive power of chemical explosives by Trauzl number:
Notes