TheInfoList

In geometry, Thales's theorem states that if A, B, and C are distinct points on a circle where the line is a diameter, the angle ABC is a right angle. Thales's theorem is a special case of the inscribed angle theorem and is mentioned and proved as part of the 31st proposition in the third book of Euclid's ''Elements''. It is generally attributed to Thales of Miletus but it is sometimes attributed to Pythagoras.

History

There is nothing extant of the writing of Thales; work done in ancient Greece tended to be attributed to men of wisdom without respect to all the individuals involved in any particular intellectual constructions — this is true of Pythagoras especially. Attribution did tend to occur at a later time. Reference to Thales was made by Proclus, and by Diogenes Laërtius documenting Pamphila's statement that Thales "was the first to inscribe in a circle a right-angle triangle". Indian and Babylonian mathematicians knew this for special cases before Thales proved it. It is believed that Thales learned that an angle inscribed in a semicircle is a right angle during his travels to Babylon. The theorem is named after Thales because he was said by ancient sources to have been the first to prove the theorem, using his own results that the base angles of an isosceles triangle are equal, and that the sum of angles in a triangle is equal to 180°. Dante's ''Paradiso'' (canto 13, lines 101–102) refers to Thales's theorem in the course of a speech.

Proof

First proof

The following facts are used: the sum of the angles in a triangle is equal to 180° and the base angles of an isosceles triangle are equal. Since = = , ∆OBA and ∆OBC are isosceles triangles, and by the equality of the base angles of an isosceles triangle, ∠OBC = ∠OCB and ∠OBA = ∠OAB. Let ''α'' = ∠BAO and β = ∠OBC. The three internal angles of the ∆ABC triangle are ''α'', (''α'' + ''β''), and ''β''. Since the sum of the angles of a triangle is equal to 180°, we have :$\alpha+\left\left( \alpha + \beta \right\right) + \beta = 180^\circ$ :$2\alpha + 2\beta =180^\circ$ :$2\left( \alpha + \beta \right) =180^\circ$ :$\therefore \alpha + \beta =90^\circ.$ Q.E.D.

Second proof

The theorem may also be proven using trigonometry: Let $O = \left(0, 0\right)$, $A = \left(-1, 0\right)$, and $C = \left(1, 0\right)$. Then B is a point on the unit circle $\left(\cos \theta, \sin \theta\right)$. We will show that ∆ABC forms a right angle by proving that and are perpendicular — that is, the product of their slopes is equal to −1. We calculate the slopes for and : :$m_ = \frac = \frac$ and :$m_ = \frac = \frac$ Then we show that their product equals −1: : $\begin &m_ \cdot m_\\pt= & \frac \cdot \frac\\pt= & \frac\\pt= & \frac\\pt= & \end$ Note the use of the Pythagorean trigonometric identity $\sin^2 \theta + \cos^2 \theta = 1$.

Third proof

Let $ABC$ be a triangle in a circle where $AB$ is a diameter in that circle. Then construct a new triangle $ABD$ by mirroring triangle $ABC$ over the line $AB$ and then mirroring it again over the line perpendicular to $AB$ which goes through the center of the circle. Since lines $AC$ and $BD$ are parallel, likewise for $AD$ and $CB$, the quadrilateral $ACBD$ is a parallelogram. Since lines $AB$ and $CD$ are both diameters of the circle and therefore are equal length, the parallelogram must be a rectangle. All angles in a rectangle are right angles.

Converse

For any triangle, and, in particular, any right triangle, there is exactly one circle containing all three vertices of the triangle. (''Sketch of proof''. The locus of points equidistant from two given points is a straight line that is called the perpendicular bisector of the line segment connecting the points. The perpendicular bisectors of any two sides of a triangle intersect in exactly one point. This point must be equidistant from the vertices of the triangle.) This circle is called the circumcircle of the triangle. One way of formulating Thales's theorem is: if the center of a triangle's circumcircle lies on the triangle then the triangle is right, and the center of its circumcircle lies on its hypotenuse. The converse of Thales's theorem is then: the center of the circumcircle of a right triangle lies on its hypotenuse. (Equivalently, a right triangle's hypotenuse is a diameter of its circumcircle.)

Proof of the converse using geometry

This proof consists of 'completing' the right triangle to form a rectangle and noticing that the center of that rectangle is equidistant from the vertices and so is the center of the circumscribing circle of the original triangle, it utilizes two facts: *adjacent angles in a parallelogram are supplementary (add to 180°) and, *the diagonals of a rectangle are equal and cross each other in their median point. Let there be a right angle ∠ABC, r a line parallel to passing by A and s a line parallel to passing by C. Let D be the point of intersection of lines r and s (Note that it has not been proven that D lies on the circle) The quadrilateral ABCD forms a parallelogram by construction (as opposite sides are parallel). Since in a parallelogram adjacent angles are supplementary (add to 180°) and ∠ABC is a right angle (90°) then angles ∠BAD, ∠BCD, and ∠ADC are also right (90°); consequently ABCD is a rectangle. Let O be the point of intersection of the diagonals and . Then the point O, by the second fact above, is equidistant from A, B, and C. And so O is center of the circumscribing circle, and the hypotenuse of the triangle () is a diameter of the circle.

Alternate proof of the converse using geometry

Given a right triangle with hypotenuse , construct a circle Ω whose diameter is . Let be the center of Ω. Let be the intersection of Ω and the ray . By Thales's theorem, ∠ is right. But then must equal . (If lies inside ∆, ∠ would be obtuse, and if lies outside ∆, ∠ would be acute.)

Proof of the converse using linear algebra

This proof utilizes two facts: *two lines form a right angle if and only if the dot product of their directional vectors is zero, and *the square of the length of a vector is given by the dot product of the vector with itself. Let there be a right angle ∠ABC and circle M with as a diameter. Let M's center lie on the origin, for easier calculation. Then we know *A = − C, because the circle centered at the origin has as diameter, and *(A − B) · (B − C) = 0, because ∠ABC is a right angle. It follows :0 = (A − B) · (B − C) = (A − B) · (B + A) = |A|2 − |B|2. Hence: :|A| = |B|. This means that ''A'' and ''B'' are equidistant from the origin, i.e. from the center of ''M''. Since ''A'' lies on ''M'', so does ''B'', and the circle ''M'' is therefore the triangle's circumcircle. The above calculations in fact establish that both directions of Thales's theorem are valid in any inner product space.

Generalizations and related results

Thales's theorem is a special case of the following theorem: :Given three points A, B and C on a circle with center O, the angle ∠AOC is twice as large as the angle ∠ABC. See inscribed angle, the proof of this theorem is quite similar to the proof of Thales's theorem given above. A related result to Thales's theorem is the following: *If is a diameter of a circle, then: :*If B is inside the circle, then ∠ABC > 90° :*If B is on the circle, then ∠ABC = 90° :*If B is outside the circle, then ∠ABC < 90°.

Application

thumb|Constructing a tangent using Thales's theorem. Thales's theorem can be used to construct the tangent to a given circle that passes through a given point. In the figure at right, given circle ''k'' with centre O and the point P outside ''k'', bisect OP at H and draw the circle of radius OH with centre H. OP is a diameter of this circle, so the triangles connecting OP to the points T and T′ where the circles intersect are both right triangles. Thales's theorem can also be used to find the centre of a circle using an object with a right angle, such as a set square or rectangular sheet of paper larger than the circle.Resources for Teaching Mathematics: 14–16
Colin Foster The angle is placed anywhere on its circumference (figure 1). The intersections of the two sides with the circumference define a diameter (figure 2). Repeating this with a different set of intersections yields another diameter (figure 3). The centre is at the intersection of the diameters.

* Synthetic geometry * Inverse Pythagorean theorem

Notes

References

* () *