The bit is the most basic Units of information, unit of information in computing and digital communications. The name is a portmanteau of binary digit. The bit represents a truth value, logical state with one of two possible value (computer science), values. These values are most commonly represented as either , but other representations such as ''true''/''false'', ''yes''/''no'', ''on''/''off'', or ''+''/''−'' are also commonly used. The relation between these values and the physical states of the underlying Data storage device, storage or computing device, device is a matter of convention, and different assignments may be used even within the same device or computer program, program. It may be physically implemented with a two-state device. The symbol for the binary digit is either "bit" per recommendation by the IEC 80000-13:2008 standard, or the lowercase character "b", as recommended by the IEEE 1541-2002 standard. A contiguous group of binary digits is commonly called a ''bit string'', a bit vector, or a single-dimensional (or multi-dimensional) ''bit array''. A group of eight bits is called one ''byte'', but historically the size of the byte is not strictly defined. Frequently, half, full, double and quadruple words consist of a number of bytes which is a low power of two. A string of four bits is a ''nibble''. In information theory, one bit is the information entropy of a random Binary number, binary variable that is 0 or 1 with equal probability, or the information that is gained when the value of such a variable becomes known. As a unit of information, the bit is also known as a ''shannon (unit), shannon'', named after Claude E. Shannon.

History

The encoding of data by discrete bits was used in the punched cards invented by Basile Bouchon and Jean-Baptiste Falcon (1732), developed by Joseph Marie Jacquard (1804), and later adopted by Semyon Korsakov, Charles Babbage, Hermann Hollerith, and early computer manufacturers like IBM. A variant of that idea was the perforated paper tape. In all those systems, the medium (card or tape) conceptually carried an array of hole positions; each position could be either punched through or not, thus carrying one bit of information. The encoding of text by bits was also used in Morse code (1844) and early digital communications machines such as Teleprinter, teletypes and stock ticker machines (1870). Ralph Hartley suggested the use of a logarithmic measure of information in 1928. Claude E. Shannon first used the word "bit" in his seminal 1948 paper "A Mathematical Theory of Communication". He attributed its origin to John W. Tukey, who had written a Bell Labs memo on 9 January 1947 in which he contracted "binary information digit" to simply "bit". Vannevar Bush had written in 1936 of "bits of information" that could be stored on the punched cards used in the mechanical computers of that time. The first programmable computer, built by Konrad Zuse, used binary notation for numbers.

Physical representation

A bit can be stored by a digital device or other physical system that exists in either of two possible distinct state (computer science), states. These may be the two stable states of a flip-flop, two positions of an Switch, electrical switch, two distinct voltage or electric current, current levels allowed by a electrical circuit, circuit, two distinct levels of Irradiance, light intensity, two directions of magnetism, magnetization or electrical polarity, polarization, the orientation of reversible double stranded DNA, etc. Bits can be implemented in several forms. In most modern computing devices, a bit is usually represented by an Electricity, electrical voltage or Electric current, current pulse, or by the electrical state of a flip-flop circuit. For devices using positive logic, a digit value of (or a logical value of true) is represented by a more positive voltage relative to the representation of . The specific voltages are different for different logic families and variations are permitted to allow for component aging and noise immunity. For example, in transistor–transistor logic (TTL) and compatible circuits, digit values and at the output of a device are represented by no higher than 0.4 volts and no lower than 2.6 volts, respectively; while TTL inputs are specified to recognize 0.8 volts or below as and 2.2 volts or above as .

Transmission and processing

Bits are transmitted one at a time in serial transmission, and by a multiple number of bits in parallel transmission. A bitwise operation optionally processes bits one at a time. Data transfer rates are usually measured in decimal SI multiples of the unit bit per second (bit/s), such as kbit/s.

Storage

In the earliest non-electronic information processing devices, such as Jacquard's loom or Babbage's Analytical Engine, a bit was often stored as the position of a mechanical lever or gear, or the presence or absence of a hole at a specific point of a Punched card, paper card or Punched tape, tape. The first electrical devices for discrete logic (such as elevator and traffic light control Electronic circuit, circuits, telephone switches, and Konrad Zuse's computer) represented bits as the states of electrical relays which could be either "open" or "closed". When relays were replaced by vacuum tubes, starting in the 1940s, computer builders experimented with a variety of storage methods, such as pressure pulses traveling down a mercury delay line, charges stored on the inside surface of a cathode-ray tube, or opaque spots printed on optical disc, glass discs by photolithographic techniques. In the 1950s and 1960s, these methods were largely supplanted by magnetic storage devices such as magnetic-core memory, magnetic tapes, magnetic drum, drums, and Disk storage, disks, where a bit was represented by the polarity of magnetism, magnetization of a certain area of a ferromagnetic film, or by a change in polarity from one direction to the other. The same principle was later used in the magnetic bubble memory developed in the 1980s, and is still found in various magnetic strip items such as Rapid transit, metro tickets and some credit cards. In modern semiconductor memory, such as dynamic random-access memory, the two values of a bit may be represented by two levels of electric charge stored in a capacitor. In certain types of programmable logic arrays and read-only memory, a bit may be represented by the presence or absence of a conducting path at a certain point of a circuit. In optical discs, a bit is encoded as the presence or absence of a microscopic pit on a reflective surface. In one-dimensional bar codes, bits are encoded as the thickness of alternating black and white lines.

Unit and symbol

The bit is not defined in the International System of Units (SI). However, the International Electrotechnical Commission issued standard IEC 60027, which specifies that the symbol for binary digit should be 'bit', and this should be used in all multiples, such as 'kbit', for kilobit. However, the lower-case letter 'b' is widely used as well and was recommended by the IEEE 1541-2002, IEEE 1541 Standard (2002). In contrast, the upper case letter 'B' is the standard and customary symbol for byte.

Multiple bits

Multiple bits may be expressed and represented in several ways. For convenience of representing commonly reoccurring groups of bits in information technology, several units of information have traditionally been used. The most common is the unit byte, coined by Werner Buchholz in June 1956, which historically was used to represent the group of bits used to encode a single character (computing), character of text (until UTF-8 multibyte encoding took over) in a computer and for this reason it was used as the basic address space, addressable element in many computer architectures. The trend in hardware design converged on the most common implementation of using eight bits per byte, as it is widely used today. However, because of the ambiguity of relying on the underlying hardware design, the unit Octet (computing), octet was defined to explicitly denote a sequence of eight bits. Computers usually manipulate bits in groups of a fixed size, conventionally named "Word (computer architecture), words". Like the byte, the number of bits in a word also varies with the hardware design, and is typically between 8 and 80 bits, or even more in some specialized computers. In the 21st century, retail personal or server computers have a word size of 32 or 64 bits. The International System of Units defines a series of decimal prefixes for multiples of standardized units which are commonly also used with the bit and the byte. The prefixes kilo-, kilo (10³) through yotta-, yotta (10²⁴) increment by multiples of one thousand, and the corresponding units are the kilobit (kbit) through the yottabit (Ybit).

Information capacity and information compression

When the information capacity of a storage system or a communication channel is presented in ''bits'' or ''bits per second'', this often refers to binary digits, which is a computer hardware capacity to store binary data ( or , up or down, current or not, etc.). Information capacity of a storage system is only an upper bound to the quantity of information stored therein. If the two possible values of one bit of storage are not equally likely, that bit of storage contains less than one bit of information. If the value is completely predictable, then the reading of that value provides no information at all (zero entropic bits, because no resolution of uncertainty occurs and therefore no information is available). If a computer file that uses ''n'' bits of storage contains only ''m'' < ''n'' bits of information, then that information can in principle be encoded in about ''m'' bits, at least on the average. This principle is the basis of lossless data compression, data compression technology. Using an analogy, the hardware binary digits refer to the amount of storage space available (like the number of buckets available to store things), and the information content the filling, which comes in different levels of granularity (fine or coarse, that is, compressed or uncompressed information). When the granularity is finer—when information is more compressed—the same bucket can hold more. For example, it is estimated that the combined technological capacity of the world to store information provides 1,300 exabytes of hardware digits. However, when this storage space is filled and the corresponding content is optimally compressed, this only represents 295 exabytes of information. When optimally compressed, the resulting carrying capacity approaches Shannon information or information entropy.

Bit-based computing

Certain bitwise operation, bitwise computer central processing unit, processor instructions (such as ''bit set'') operate at the level of manipulating bits rather than manipulating data interpreted as an aggregate of bits. In the 1980s, when bitmapped computer displays became popular, some computers provided specialized bitblt, bit block transfer instructions to set or copy the bits that corresponded to a given rectangular area on the screen. In most computers and programming languages, when a bit within a group of bits, such as a byte or word, is referred to, it is usually specified by a number from 0 upwards corresponding to its position within the byte or word. However, 0 can refer to either the most significant bit, most or least significant bit depending on the context.

Other information units

Similar to torque and energy in physics; Information#Information theory, information-theoretic information and data storage size have the same Dimensional analysis, dimensionality of Unit of measurement, units of measurement, but there is in general no meaning to adding, subtracting or otherwise combining the units mathematically, although one may act as a bound on the other. Units of information used in information theory include the ''shannon (unit), shannon'' (Sh), the ''nat (unit), natural unit of information'' (nat) and the ''hartley (unit), hartley'' (Hart). One shannon is the maximum amount of information needed to specify the state of one bit of storage. These are related by 1 Sh ≈ 0.693 nat ≈ 0.301 Hart. Some authors also define a binit as an arbitrary information unit equivalent to some fixed but unspecified number of bits.

References

External links

Bit Calculator
– a tool providing conversions between bit, byte, kilobit, kilobyte, megabit, megabyte, gigabit, gigabyte
BitXByteConverter
– a tool for computing file sizes, storage capacity, and digital information in various units {{Authority control Binary arithmetic Primitive types Data types Units of information