String bending

String bending is a guitar technique where fretted strings are displaced by application of a force by the fretting fingers in a direction perpendicular to their vibrating length. This has the net effect of increasing the pitch of a note (or notes as the case may be). String-bending allows exploration of microtonality and can be used to give a distinctive vocal articulation to lead guitar passages.

Technique

String bending is executed by fretting a note on the guitar fretboard, and then applying a force perpendicular to the length of the fretboard with the fretting hand, displacing the string from its resting vibrating position. This yields a continuous increase in pitch, which can be manipulated by a skillful player to give a singing-like quality to a musical passage. The displacement of the string can be pushed "up" or pulled "down". Bending is an important component in the style of several renowned players, such as Eric Clapton, who uses copious amounts of string bending to articulate blues licks. String-bending blues-scale guitar solos were used in 1950s electric blues music where it was most notably popularized by B.B. King, and later rock musicians adopted the string-bending technique in the 1960s.Michael Campbell & James Brody (2007), ''Rock and Roll: An Introduction''
page 201
/ref>

Factors influencing string bending

There are numerous mechanical and acoustic properties which heavily influence the resultant pitch from a string bend. Analysis of the physics of string bending
suggests that the resultant pitch of a string bent at its midpoint is given by

$\nu = \frac \sqrt$

where ''L'' is the length of the vibrating element, ''T'' is the tension of the string prior to bending, $\theta$ is the bend angle, ''E'' is the Young's Modulus of the string material, ''A'' is the string cross sectional area and $\mu_$ is the linear density of the string material.

Thus, the pitch is not only dependent on the bend angle, but on material properties of the string such as Young's modulus; this may be interpreted as a measure of the stiffness of the string. The force required to bend a string at its midpoint to a given angle $\theta$ is given by

$F_ = 2\left(T + EA\left(\frac \right) \right)\sin\theta .$

It is important to note that the resultant pitch from string bending is not linearly correlated with the bending angle, and so a player's experience and intuition is important for accurate pitch modulation.

See also

*Finger vibrato
* Finger vibrato#Axial pitch-shifting

References

{{Reflist

Guitar performance techniques