Sekaninaite

Sekaninaite ((Fe⁺²,Mg)₂Al₄Si₅O₁₈) is a silicate mineral, the iron-rich analogue of cordierite.

It was first described in 1968 for an occurrence in Dolní Bory, Vysočina Region, Moravia, Czech Republic, and is now known also from Ireland, Japan, and Sweden. It was named after a Czech mineralogist, Josef Sekanina (1901–1986). In Brockley on Rathlin Island, Ireland sekaninaite occurs in bauxitic clay within the contact aureole of a diabase intrusive plug.

Structure and composition

The chemical formula of sekaninaite is: (Fe^2+, Mg^2+)2 l4Si5O18\mathitH2O. Grapes et al. (2010) calculated the percentage weights of the sample from Dolni Bory,
This compound exists in nature in the form of two polymorphs: one having a disordered hexagonal structure and the other arranged in an ordered orthorhombic structure. As an aluminosilicate, the repeated and ordered structure is based on polymerization of one or the other's tetrahedral framework of Si, Al tetrahedra (Yakubovich et al., 2003). Nearly all analyses show excess of Al and deficiency in Si with respect to tetrahedral components. The overall substitution of alkalis causes excess in cations found in (K₂O, Na₂O, CaO), implying that sekaninaite is essentially anhydrous (Grapes et al., 2010).

The atomic structures of cordierites are interpreted as a continuous series of structures that vary based on the content of octahedrally coordinated Mg and Fe cations. The varying content of atoms in the octahedral M position has an effect on the orthorhombic unit cell's parameters. The wide range of isomorphism of Mg and Fe(4-96%) suggest the existence of a continuous isomorphic series cordierite (Mg,Fe)2 l4Si4O18\mathitH2O-sekaninaite (Fe,Mg)2 l4Si4O18\mathitH2O. It is shown via crystallographic data that a shift in the iron content leads to a corresponding variance in a and b unit cell parameters (Yakubovich et al., 2003). As an aluminosilicate/cyclosilicate, the octahedral M-O distances consist of 5 independent tetrahedra form a 3-dimensional anionic framework of ordered and distributed Al³⁺ and Si⁴⁺ cations. One independent AlO₄ and two SiO₄ vortex-sharing tetrahedra share oxygen atoms to form six-member rings along the c axis of the unit cell. Mg, Fe octahedra share edges with SiO₄ to form rings from alternating octahedra and tetrahedra. Thus, the framework can be described as a semi-layered structure formed of layers of tetrahedra linked into rings by sharing vertices and octahedra and tetrahedra sharing edges, alternating along the c axis. The distortion of the orthorhombic unit cell is determined by the chemical composition rather than the degree of ordering in the tetrahedral framework (Yakubovich et al., 2003). The temperature at which the liquidous phases crystallize in a sequence: mullite + tridymite, followed by sekaninaite and finally fayalite + clinoferrosilite (Grapes et al., 2010). Similar trends are observed for amphiboles, clinopyroxenes, olivines, and others. The increase in the Fe mole fraction of minerals was not related with iron input, but was caused by its redistribution during contact metamorphism (Korchak et al., 2010).

Physical properties

Stanek and Miskovsky (1975) first identified and diagnosed sekaninaite as a new mineral in the cordierite series. They sampled the poorly developed crystals of the Dolni Bory region, Czechoslovakia, where specimen did not exceed 70 cm. Dolni Bory samples are very different from samples found in the Kuznetsk paralavas. They are very close analogues with respect to Mg/Fe ratios but vastly different a-, b- and c- parameters (Grapes et al., 2010). Grapes and colleagues calculated cell dimension to be a 17.230(5), b 9.835(3), c 9.314(3) A. The colour of sekaninaite is bright blue and distinctly pleochroic with X = colourless; Y = blue; Z = pale blue; absorption occurs in the sequence Y > Z > X. Sekaninaite has a hardness of 7-7.5; it cleaves imperfectly along and exhibits parting on (Fleischer and Jambor, 1977). Majority of crystals show zonation (Fe increasing from core to rim). It common twinned on and , simulating hexagonal symmetry. Sekaninaite is classified under the space group Cccm; it is an orthorhombic crystal that is found in series with cordierite (Stanek et al., 1975).

Geologic occurrence and location

Sekaninaite was first discovered in the Dolni Bory region of the Czech Republic. Its occurrence is in the albite zone of pegmatite in granulites and gneisses (Fleischer and Jambor, 1977). Sekaninaite is found in pyrometamorphic rocks, extensively rocks formed via process of ancient combustion metamorphism; paralavas, clinkers and buchites. These combustion metamorphic rocks occur in clinker beds and breccias of vitrified sandstone-siltstone clinker fragments cemented by paralava. These partially baked and oxidized psammitic-pelitic sediments are associated with burnt coal seams, belonging to places like the Kuznetsk coal basin, Siberia (Grapes et al., 2010). Sekaninaite-Fe-cordierite exists in series and is largely dependent upon variations in solid solution. These minerals are more prevalent in paralavas found in: Power River, Wyoming, Ravat area, Tajikistan, Kenderlyk Basin, eastern Kazakhstan and the Djhar basin in India; each differ in sedimentary mineral assemblage and results depend on high-temperature fusion of mixtures of sandstone-siltstone and minor ferruginous components (Grapes et al., 2010). These Fe-rich paralavas are composed of Fe-olivine, esseneite, dorite, melilite, Fe-cordierite, anorthite, spinel, tridymite, fayalite, magnetite, quartz etc. (Novikova, 2009).

See also

* List of minerals
* List of minerals named after people

References

{{Reflist

* Anthony, John W., Bideaux, Richard A., Bladh, Kenneth W., and Nichols, Monte C., Eds. (2003). Handbook of mineralogy, Mineralogical Society of America, Chantilly, VA 20151-1110, USA. http://www.handbookofmineralogy.org.
* Fleischer, M., Jambor, J. (1977). American Mineralogist, 62, 195–397.
* Geiger, C.A., Voigtlander, H., (2000). Contributions to mineral petrology. The heat capacity of synthetic anhydrous Mg and Fe cordierite. Springer-Verlag, Kiel, 46–50.
* Grapes, R., Korzhova, S., Sokol, E., Seryotkin, Y. (2010). Paragenesis of unusual Fe-cordierite (sekaninaite)-bearing paralava and clinker from the Kuznetsk coal basin, Siberia, Russia. Contributions of Mineral Petrology, 162, 253–273.
* Korchak, Yu. A., Men’shikov, Yu.P., Pakhomovskii, Ya. A., Yakovenchuk, V.N., Ivanyuk, G.Yu. (2011). Trap formation of the Kola Peninsula. Petrologiya, 19 (1), 89–103.
* Miskovsky, J., Stanek, J. (1975). Sekaninaite, a new mineral of the cordierite series from Dolni Bory, Czechoslovakia. Scr. Fac. Sci. Nat. Ujep. Brun. Geol. 1(5), 21–30.
* Novikova, S. A. (2009). Fayalite from Fe-rich Paralavas of ancient coal fires in the Kuzbass, Russia. Geology of Ore Deposits, 51 (8), 800–811. https://doi.org/10.1134/S1075701509080133
* Yakubovich, O. V., Massa, V., Pekov, I. V., Gavrilenko, P. G., Chukanov, N. V. (2004). Crystallography Reports, 49 (6), 953–963.

Iron(II) minerals
Magnesium minerals
Aluminium minerals
Cyclosilicates
Orthorhombic minerals
Minerals in space group 66