Schreder HP-19
   HOME

TheInfoList



OR:

The Schreder HP-19 is an
American American(s) may refer to: * American, something of, from, or related to the United States of America, commonly known as the "United States" or "America" ** Americans, citizens and nationals of the United States of America ** American ancestry, pe ...
,
high-wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes. A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...
,
T-tail A T-tail is an empennage configuration in which the tailplane is mounted to the top of the fin. The arrangement looks like the capital letter T, hence the name. The T-tail differs from the standard configuration in which the tailplane is ...
, single seat
glider Glider may refer to: Aircraft and transport Aircraft * Glider (aircraft), heavier-than-air aircraft primarily intended for unpowered flight ** Glider (sailplane), a rigid-winged glider aircraft with an undercarriage, used in the sport of glidin ...
designed by Richard Schreder.Said, Bob: ''1983 Sailplane Directory,
Soaring Magazine ''SOARING'' is a magazine published monthly as a membership benefit of the Soaring Society of America. It was first published in 1937. The headquarters is in Hobbs, New Mexico. The magazine's article topics include safety issues and accounts of ind ...
'', page 24. Soaring Society of America, November 1983. USPS 499-920


Design and development

The HP-19 was another Schreder design for the
FAI 15 Metre Class Competition classes in gliding, as in other sports, mainly exist to ensure fairness in competition. However the classes have not been targeted at fostering technological development as in other sports. Instead classes have arisen because of: * t ...
. The HP-19 drawings were just complete when the designer lost interest in development and turned his attention to the HP-21 instead. The sole example of the HP-19 was built by
Henry Preiss Henry Preiss is a sailplane designer. He was a longtime friend and neighbor of Richard Schreder Richard E. Schreder (25 September 1915 – 2 August 2002) was an American naval aviator and sailplane developer, responsible for design and deve ...
in Schreder's workshop in
Bryan, Ohio Bryan is a city in, and the county seat of, Williams County, Ohio, United States. It is located in the state's northwestern corner, southwest of Toledo. The population was 8,729 at the 2020 census. History Bryan was platted in 1840 by John ...
and first flew in 1981. The HP-19 is built from metal and
fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...
and features carbon fiber spar caps, along with foam ribs. The wing is straight, tapered and has winglets, along with the trademark Schreder 90° flaps. The
airfoil An airfoil (American English) or aerofoil (British English) is the cross-sectional shape of an object whose motion through a gas is capable of generating significant lift, such as a wing, a sail, or the blades of propeller, rotor, or turbine. ...
is a Schreder modification of a Wortmann section. of water ballast can be carried. The landing gear is a retractable monowheel.


Variants

;HP-19C :The sole example of the HP-19 is registered as an HP-19C.


Specifications (HP-19)


See also


References

{{Schreder Sailplanes 1980s United States sailplanes Schreder aircraft Aircraft first flown in 1981