Schreder HP-16
   HOME

TheInfoList



OR:

The Schreder HP-16 is an American
mid-wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes. A monoplane has inherently the highest efficiency and lowest drag of any wing con ...
, single seat, V tailed,
FAI Standard Class Competition classes in gliding, as in other sports, mainly exist to ensure fairness in competition. However the classes have not been targeted at fostering technological development as in other sports. Instead classes have arisen because of: * t ...
glider Glider may refer to: Aircraft and transport Aircraft * Glider (aircraft), heavier-than-air aircraft primarily intended for unpowered flight ** Glider (sailplane), a rigid-winged glider aircraft with an undercarriage, used in the sport of glidin ...
that was designed by
Richard Schreder Richard E. Schreder (25 September 1915 – 2 August 2002) was an American naval aviator and sailplane developer, responsible for design and development of the HP/RS-series kit sailplanes marketed from 1962 until about 1982. Schreder also fou ...
.Said, Bob: ''1983 Sailplane Directory,
Soaring Magazine ''SOARING'' is a magazine published monthly as a membership benefit of the Soaring Society of America. It was first published in 1937. The headquarters is in Hobbs, New Mexico. The magazine's article topics include safety issues and accounts of in ...
'', page 23. Soaring Society of America, November 1983. USPS 499-920


Design and development

After the failure of the HP-15 to perform well in the 1969 US Nationals Schreder started the HP-16 with a new design philosophy. Avoiding the extremely high aspect ratio that the 15 had, he opted for a more modest 21.5:1 aspect ratio and larger wing area to improve performance in weak conditions. The HP-16's wing has 50% more wing area than the HP-15 and uses a Wortmann 67-150 airfoil. Like other Schreder designs the HP-16 is of all-metal construction, but with the wing skins bonded to foam ribs rather than using rivets to provide a smoother surface. The bonded construction also cut building time. The wing features the signature Schreder 90° flaps that allow steep descents and the use of small fields for landing. The HP-16s were all
amateur-built aircraft Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.Armstrong, Kenn ...
and about 20 were completed and flown.


Operational history

In April 2011 there were still eleven HP-16s registered with the US
Federal Aviation Administration The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic ...
and two registered with
Transport Canada Transport Canada (french: Transports Canada) is the department within the Government of Canada responsible for developing regulations, policies and services of road, rail, marine and air transportation in Canada. It is part of the Transporta ...
.


Aircraft on display

*
National Soaring Museum The National Soaring Museum (NSM) is an aviation museum whose stated aim is to preserve the history of motorless flight. It is located on top of Harris Hill near Elmira, New York, United States. The NSM is the Soaring Society of America's officia ...
- 1, listed as "in storage"


Specifications (variant specified)


See also


References


External links


Photo of HP-16 with a T-tail in flight
{{Schreder Sailplanes 1970s United States sailplanes Schreder aircraft Aircraft first flown in 1971