The Saffir–Simpson hurricane wind scale (SSHWS), formerly the Saffir–Simpson hurricane scale (SSHS), classifies hurricanes – Western Hemisphere tropical cyclones that exceed the intensities of tropical depressions and tropical storms – into five categories distinguished by the intensities of their sustained winds. To be classified as a hurricane, a tropical cyclone must have maximum sustained winds of at least 74 mph (33 m/s; 64 kn; 119 km/h) (Category 1). The highest classification in the scale, Category 5, consists of storms with sustained winds exceeding 156 mph (70 m/s; 136 kn; 251 km/h).
Officially, the Saffir–Simpson hurricane wind scale is used only to describe hurricanes forming in the Atlantic Ocean and northern Pacific Ocean east of the International Date Line. Other areas use different scales to label these storms, which are called "cyclones" or "typhoons", depending on the area.
There is some criticism of the SSHS for not taking rain, storm surge, and other important factors into consideration, but SSHS defenders say that part of the goal of SSHS is to be straightforward and simple to understand.
The scale was developed in 1971 by civil engineer Herbert Saffir and Scientist Robert Simpson, who at the time was director of the U.S. National Hurricane Center (NHC). The scale was introduced to the general public in 1973, and saw widespread use after Neil Frank replaced Simpson at the helm of the NHC in 1974.
The initial scale was developed by Saffir, a structural engineer, who in 1969 went on commission for the United Nations to study low-cost housing in hurricane-prone areas. While performing the study, Saffir realized there was no simple scale for describing the likely effects of a hurricane. Mirroring the utility of the Richter magnitude scale in describing earthquakes, he devised a 1–5 scale based on wind speed that showed expected damage to structures. Saffir gave the scale to the NHC, and Simpson added the effects of storm surge and flooding.
In 2009, the NHC made moves to eliminate pressure and storm surge ranges from the categories, transforming it into a pure wind scale, called the Saffir–Simpson Hurricane Wind Scale (Experimental) [SSHWS]. The new scale became operational on May 15, 2010. The scale excludes flood ranges, storm surge estimations, rainfall, and location, which means a Category 2 hurricane which hits a major city will likely do far more cumulative damage than a Category 5 hurricane that hits a rural area. The agency cited various hurricanes as reasons for removing the "scientifically inaccurate" information, including Hurricane Katrina (2005) and Hurricane Ike (2008), which both had stronger than estimated storm surges, and Hurricane Charley (2004), which had weaker than estimated storm surge. Since removed from the Saffir–Simpson hurricane wind scale, storm surge predicting and modeling is now handled with the use of a computerized numerical model developed by the National Weather Service called "Sea, Lake, and Overland Surge from Hurricanes" (SLOSH).
In 2012, the NHC expanded the windspeed range for Category 4 by 1 mph in both directions, to 130–156 mph, with corresponding changes in the other units (113–136 kn, 209–251 km/h), instead of 131–155 mph (114–135 kn, 210–249 km/h). The NHC and the Central Pacific Hurricane Center assign tropical cyclone intensities in 5 knot increments, and then convert to mph and km/h with a similar rounding for other reports. So an intensity of 115 knots is rated Category 4, but the conversion to miles per hour (132.3 mph) would round down to 130 mph, making it appear to be a Category 3 storm. Likewise, an intensity of 135 knots (~155 mph, and thus Category 4) is 250.02 km/h, which according to the definition used before the change would be Category 5. To resolve these issues, the NHC had been obliged to incorrectly report storms with wind speeds of 115 kn as 135 mph, and 135 kn as 245 km/h. The change in definition allows storms of 115 kn to be correctly rounded down to 130 mph, and storms of 135 kn to be correctly reported as 250 km/h, and still qualify as Category 4. Since the NHC had previously rounded incorrectly to keep storms in Category 4 in each unit of measure, the change does not affect the classification of storms from previous years. The new scale became operational on May 15, 2012.
The scale separates hurricanes into five different categories based on wind. The U.S. National Hurricane Center classifies hurricanes of Category 3 and above as major hurricanes, and the Joint Typhoon Warning Center classifies typhoons of 150 mph or greater (strong Category 4 and Category 5) as super typhoons (although all tropical cyclones can be very dangerous). Most weather agencies use the definition for sustained winds recommended by the World Meteorological Organization (WMO), which specifies measuring winds at a height of 33 ft (10.1 m) for 10 minutes, and then taking the average. By contrast, the U.S. National Weather Service, Central Pacific Hurricane Center and the Joint Typhoon Warning Center define sustained winds as average winds over a period of one minute, measured at the same 33 ft (10.1 m) height, and that is the definition used for this scale. Intensity of example hurricanes is from both the time of landfall and the maximum intensity.
The scale is roughly logarithmic in wind speed, and the top wind speed for Category "c" (c=1 to 4, as there is no upper limit for category 5) can be expressed as 83x10^(c/15) miles per hour rounded to the nearest multiple of 5 – except that after the change mentioned above, Category 4 is now widened by 1 mph in each direction.
The five categories are, in order of increasing intensity:
|Sustained winds||Most recent|
|Nate shortly before its Louisiana landfall in October 2017.|
Very dangerous winds will produce some damage
Category 1 storms usually cause no significant structural damage to most well-constructed permanent structures; however, they can topple unanchored mobile homes, as well as uproot or snap weak trees. Poorly attached roof shingles or tiles can blow off. Coastal flooding and pier damage are often associated with Category 1 storms. Power outages are typically widespread to extensive, sometimes lasting several days. Even though it is the least intense type of hurricane, the storm can still produce widespread damage and can be a life-threatening storm.
Hurricanes that peaked at Category 1 intensity, and made landfall at that intensity include: Flossy (1956), Gladys (1968), Agnes (1972), Juan (1985), Ismael (1995), Claudette (2003), Gaston (2004), Stan (2005), Humberto (2007), Isaac (2012), Manuel (2013), Earl (2016), Hermine (2016), Newton (2016), Franklin (2017), and Nate (2017).
|Sustained winds||Most recent|
Arthur approaching North Carolina in July 2014.
Extremely dangerous winds will cause extensive damage
Storms of Category 2 intensity often damage roofing material (sometimes exposing the roof) and inflict damage upon poorly constructed doors and windows. Poorly constructed signs and piers can receive considerable damage and many trees are uprooted or snapped. Mobile homes, whether anchored or not, are typically damaged and sometimes destroyed, and many manufactured homes also suffer structural damage. Small craft in unprotected anchorages may break their moorings. Extensive to near-total power outages and scattered loss of potable water are likely, possibly lasting many days.
Hurricanes that peaked at Category 2 intensity, and made landfall at that intensity include: Able (1952), Alice (1954), Fifi (1974), Diana (1990), Calvin (1993), Gert (1993), Rosa (1994), Erin (1995), Alma (1996), Juan (2003), Alex (2010), Richard (2010), Tomas (2010), Carlotta (2012), Ernesto (2012), and Arthur (2014).
|Sustained winds||Most recent|
Otto near its Nicaraguan landfall in November 2016.
Devastating damage will occur
Tropical cyclones of Category 3 and higher are described as major hurricanes in the Atlantic or Eastern Pacific basins. These storms can cause some structural damage to small residences and utility buildings, particularly those of wood frame or manufactured materials with minor curtain wall failures. Buildings that lack a solid foundation, such as mobile homes, are usually destroyed, and gable-end roofs are peeled off. Manufactured homes usually sustain severe and irreparable damage. Flooding near the coast destroys smaller structures, while larger structures are struck by floating debris. A large number of trees are uprooted or snapped, isolating many areas. Additionally, terrain may be flooded well inland. Near-total to total power loss is likely for up to several weeks and water will likely also be lost or contaminated.
Hurricanes that peaked at Category 3 intensity, and made landfall at that intensity include: Easy (1950), Carol (1954), Hilda (1955), Celia (1970), Ella (1970), Eloise (1975), Olivia (1975), Alicia (1983), Elena (1985), Roxanne (1995), Fran (1996), Isidore (2002), Jeanne (2004), Lane (2006), Karl (2010), and Otto (2016).
|Sustained winds||Most recent|
Harvey shortly before its Texas landfall in August 2017.
Catastrophic damage will occur
Category 4 hurricanes tend to produce more extensive curtainwall failures, with some complete structural failure on small residences. Heavy, irreparable damage and near complete destruction of gas station canopies and other wide span overhang type structures are common. Mobile and manufactured homes are often flattened. Most trees, except for the heartiest, are uprooted or snapped, isolating many areas. These storms cause extensive beach erosion, while terrain may be flooded far inland. Total and long-lived electrical and water losses are to be expected, possibly for many weeks.
The 1900 Galveston hurricane, the deadliest natural disaster to hit the United States, peaked at an intensity that corresponds to a modern-day Category 4 storm. Other examples of storms that peaked at Category 4 intensity, and made landfall at that intensity include: Hazel (1954), Gracie (1959), Flora (1963), Cleo (1964), Betsy (1965), Frederic (1979), Joan (1988), Iniki (1992), Luis (1995), Iris (2001), Charley (2004), Dennis (2005), Gustav (2008), Ike (2008), Joaquin (2015), and Harvey (2017).
|Sustained winds||Most recent|
|≥ 70 m/s
≥ 137 kn
≥ 252 km/h
≥ 157 mph
|Maria near peak intensity in September 2017.|
Catastrophic damage will occur
Category 5 is the highest category of the Saffir–Simpson scale. These storms cause complete roof failure on many residences and industrial buildings, and some complete building failures with small utility buildings blown over or away. Collapse of many wide-span roofs and walls, especially those with no interior supports, is common. Very heavy and irreparable damage to many wood frame structures and total destruction to mobile/manufactured homes is prevalent. Only a few types of structures are capable of surviving intact, and only if located at least 3 to 5 miles (5 to 8 km) inland. They include office, condominium and apartment buildings and hotels that are of solid concrete or steel frame construction, public multi-story concrete parking garages, and residences that are made of either reinforced brick or concrete/cement block and have hipped roofs with slopes of no less than 35 degrees from horizontal and no overhangs of any kind, and if the windows are either made of hurricane-resistant safety glass or covered with shutters. Unless all of these requirements are met, the absolute destruction of a structure is certain.
The storm's flooding causes major damage to the lower floors of all structures near the shoreline, and many coastal structures can be completely flattened or washed away by the storm surge. Virtually all trees are uprooted or snapped and some may be debarked, isolating most affected communities. Massive evacuation of residential areas may be required if the hurricane threatens populated areas. Total and extremely long-lived power outages and water losses are to be expected, possibly for up to several months.
Historical examples of storms that made landfall at Category 5 status include: "Cuba" (1924), "Okeechobee" (1928), "Bahamas" (1932), "Cuba–Brownsville" (1933), "Labor Day" (1935), Janet (1955), Camille (1969), Edith (1971), Anita (1977), David (1979), Gilbert (1988), Andrew (1992), Dean (2007), Felix (2007), Irma (2017), and Maria (2017). No Category 5 hurricane is known to have made landfall at that strength in the eastern Pacific basin.
Some scientists, including Kerry Emanuel and Lakshmi Kantha, have criticized the scale as being simplistic, indicating that the scale takes into account neither the physical size of a storm nor the amount of precipitation it produces. Additionally, they and others point out that the Saffir–Simpson scale, unlike the Richter scale used to measure earthquakes, is not continuous, and is quantized into a small number of categories. Proposed replacement classifications include the Hurricane Intensity Index, which is based on the dynamic pressure caused by a storm's winds, and the Hurricane Hazard Index, which is based on surface wind speeds, the radius of maximum winds of the storm, and its translational velocity. Both of these scales are continuous, akin to the Richter scale; however, neither of these scales have been used by officials.
After the series of powerful storm systems of the 2005 Atlantic hurricane season, as well as after Hurricane Patricia, a few newspaper columnists and scientists brought up the suggestion of introducing Category 6, and they have suggested pegging Category 6 to storms with winds greater than 174 or 180 mph (78 or 80 m/s; 151 or 156 kn; 280 or 290 km/h). Only a few storms of this intensity have been recorded. Of the 33 hurricanes currently considered to have attained Category 5 status in the Atlantic, 18 had wind speeds at 175 mph (78 m/s; 152 kn; 282 km/h) or greater and only seven had wind speeds at 180 mph (80 m/s; 160 kn; 290 km/h) or greater (the 1935 Labor Day hurricane, Allen, Gilbert, Mitch, Rita, Wilma, and Irma). Of the 15 hurricanes currently considered to have attained Category 5 status in the eastern Pacific, only five had wind speeds at 175 mph (78 m/s; 152 kn; 282 km/h) or greater (Patsy, John, Linda, Rick, and Patricia), and only three had wind speeds at 180 mph (80 m/s; 160 kn; 290 km/h) or greater (Linda, Rick, and Patricia),and only one with wind speeds at 200 mph (89 m/s; 170 kn; 320 km/h) or greater Patricia) . However, most storms which would be eligible for this category were typhoons in the western Pacific and one hurricane in the eastern Pacific, most notably Typhoon Tip in 1979 with sustained winds of 190 mph (310 km/h) and typhoons Haiyan and Meranti in 2013 and 2016, respectively, with sustained winds of 195 mph (314 km/h) and Hurricane Patricia in 2015 with sustained winds of 215 mph (346 km/h).
According to Robert Simpson, there are no reasons for a Category 6 on the Saffir–Simpson Scale because it is designed to measure the potential damage of a hurricane to human-made structures. Simpson stated that "...when you get up into winds in excess of 155 mph (249 km/h) you have enough damage if that extreme wind sustains itself for as much as six seconds on a building it's going to cause rupturing damages that are serious no matter how well it's engineered." Nonetheless, the counties of Broward and Miami-Dade in Florida have building codes which require critical infrastructure buildings to be able to withstand Category 5 winds.