SMPTE 424M is a
standard Standard may refer to:
Symbols
* Colours, standards and guidons, kinds of military signs
* Standard (emblem), a type of a large symbol or emblem used for identification
Norms, conventions or requirements
* Standard (metrology), an object th ...
published by
SMPTE
The Society of Motion Picture and Television Engineers (SMPTE) (, rarely ), founded in 1916 as the Society of Motion Picture Engineers or SMPE, is a global professional association of engineers, technologists, and executives working in the m ...
which expands upon
SMPTE 259M
SMPTE 259M is a standard published by SMPTE which "describes a 10-bit serial digital interface operating at 143/270/360 Mb/s."
The goal of SMPTE 259M is to define a serial digital interface (based on a coaxial cable), called SDI or SD-SDI.
There ...
,
SMPTE 344M, and
SMPTE 292M allowing for bit-rates of 2.970 Gbit/s and 2.970/1.001 Gbit/s over a single-link
coaxial
In geometry, coaxial means that several three-dimensional linear or planar forms share a common axis. The two-dimensional analog is ''concentric''.
Common examples:
A coaxial cable is a three-dimensional linear structure. It has a wire condu ...
cable. These bit-rates are sufficient for
1080p
1080p (1920×1080 progressively displayed pixels; also known as Full HD or FHD, and BT.709) is a set of HDTV high-definition video modes characterized by 1,920 pixels displayed across the screen horizontally and 1,080 pixels down the screen ve ...
video at 50 or 60 frames per second.
[SMPTE 292M] The initial 424M standard was published in 2006, with a revision published in 2012 (SMPTE ST 424:2012). This standard is part of a family of standards that define a
serial digital interface (SDI); it is commonly known as 3G-SDI.
Formats
Within this standard, there are three formats:
*Level A format is the direct mapping of uncompressed 1080p (up to 60 fps) video into a serial digital interface at the nominal 3 Gbit/s. That is, one video signal, one video stream, in one cable.
*Level B-DL format is the mapping of dual-link HD-SDI/
SMPTE 372M (i.e.: 1080p up to 60 fps) in a single serial digital interface at the nominal 3 Gbit/s. That is, one video signal, two streams, in one cable.
*Level B-DS format is the dual-stream carriage of two independent HD-SDI/SMPTE 292M signals (720p up to 60 fps or 1080i/1080p up to 30 fps) in a single serial digital interface at the nominal 3 Gbit/s. That is, two video signals, two video streams, in one cable.
References
Film and video technology
SMPTE standards
{{Tv-tech-stub