SER Q class
   HOME

TheInfoList



OR:

The SER Q class was a class of
0-4-4T Under the Whyte notation for the classification of steam locomotives, 0-4-4 represents the wheel arrangement of no leading wheels, four powered and coupled driving wheels on two axles, and four trailing wheels on two axles. This type was only used ...
steam locomotives of the South Eastern Railway. The class was designed by James Stirling and introduced in 1881.


Construction

Prior to the appointment of James Stirling as
Locomotive Superintendent Chief mechanical engineer and locomotive superintendent are titles applied by British, Australian, and New Zealand railway companies to the person ultimately responsible to the board of the company for the building and maintaining of the locomotive ...
of the South Eastern Railway (SER) in 1878, that railway possessed only a small number of tank locomotives suitable for the London suburban passenger services. There were twelve 0-4-2WT of the 205 class (later G class) dating from 1863–64; seven 0-4-4WT of the 235 class (later J class) dating from 1866; six 0-4-2WT of the 73 class (later H class) dating from 1867–69; and nine 0-4-4T of the 58 class (later M class) dating from 1877–78. The SER had opened a connection to the
London, Chatham and Dover Railway The London, Chatham and Dover Railway (LCDR or LC&DR) was a railway company in south-eastern England created on 1 August 1859, when the East Kent Railway was given parliamentary approval to change its name. Its lines ran through London and no ...
in June1878 giving access to Blackfriars station, the
Widened Lines The Widened Lines (also known as the City Widened Lines; formerly known as the Moorgate Line) is a double-track railway line forming part of the Thameslink route between St Pancras and within Central London. For most of their life the Widene ...
and thus the Great Northern Railway. Tender locomotives were not suitable for working this route, and nor were many of the existing tank engines which were not powerful enough. As a stop-gap pending the preparation of a new design, the SER purchased three newly-built Metropolitan Railway B Class 4-4-0T locomotives from that railway in April 1880, which were used on SER services from via Blackfriars and to . They were sold back to the Metropolitan Railway in November 1883. In his previous post with the Glasgow and South Western Railway (G&SWR), Stirling had designed an 0-4-4T for suburban passenger services, the G&SWR 1 class. He kept copies of the drawings and used these as the basis for a new class for the SER, which became the SER Q class. One hundred and eighteen locomotives were built between 1881 and 1897, of which 60 were built by
Neilson and Company Neilson and Company was a locomotive manufacturer in Glasgow, Scotland. The company was started in 1836 at McAlpine Street by Walter Neilson and James Mitchell to manufacture marine and stationary engines. In 1837 the firm moved to Hyde Park ...
; 48 by the SER at
Ashford Works Ashford railway works was in the town of Ashford in the county of Kent in England. History South Eastern Railway Ashford locomotive works was built by the South Eastern Railway on a new site in 1847, replacing an earlier locomotive repair fa ...
; and ten by
Sharp, Stewart and Company Sharp, Stewart and Company was a steam locomotive manufacturer, initially located in Manchester, England. The company was formed in 1843 upon the demise of Sharp, Roberts & Co.. It moved to Glasgow, Scotland, in 1888, eventually amalgamating wit ...
. Most were built with tall chimneys giving an overall height of and two
injector An injector is a system of ducting and nozzles used to direct the flow of a high-pressure fluid in such a way that a lower pressure fluid is entrained in the jet and carried through a duct to a region of higher pressure. It is a fluid-dynamic ...
s for the boiler feed. The 1881–82 Ashford series were built for working through the Snow Hill tunnel and the tunnels of the East London Railway, and so were provided with condensers and short chimneys giving an overall height of , one injector being omitted and a boiler feed pump fitted instead. The first 34, built between 1881 and 1885, had bogies of wheelbase having wheels of diameter. These bogies had a fixed centre pin and were troublesome, and so beginning in 1887 new locomotives had a better bogie design based upon that of the contemporary 4-4-0s of the F class. This had side play, its wheelbase being ; and after four of these had been built using the 3-foot wheel, subsequent locomotives had the bogie wheel diameter increased to to make them fully interchangeable with those of the F class.


Rebuilding

The locomotives passed to the South Eastern and Chatham Railway in 1899 and 55 were rebuilt by
Harry Wainwright Harry Smith Wainwright (16 November 1864 – 19 September 1925) was an English railway engineer, and was the Locomotive, Carriage and Wagon Superintendent of the South Eastern and Chatham Railway from 1899 to 1913. He is best known for a se ...
to class Q1 between 1903 and 1919.


Numbering

Thirty-two unrebuilt locomotives survived into Southern Railway ownership on 1 January 1923 with random numbers between 6 and 424. All had been withdrawn by 1929.


References


Bibliography

* * * * South Eastern Railway (UK) locomotives, Q 0-4-4T locomotives Railway locomotives introduced in 1881 Scrapped locomotives Standard gauge steam locomotives of Great Britain {{England-steam-loco-stub