Residue (complex analysis)

In mathematics, more specifically complex analysis, the residue is a complex number proportional to the contour integral of a meromorphic function along a path enclosing one of its singularities. (More generally, residues can be calculated for any function $f\colon \mathbb \setminus \_k \rightarrow \mathbb$ that is holomorphic except at the discrete points _''k'', even if some of them are essential singularities.) Residues can be computed quite easily and, once known, allow the determination of general contour integrals via the residue theorem.

Definition

The residue of a meromorphic function $f$ at an isolated singularity $a$, often denoted $\operatorname(f,a)$, $\operatorname_a(f)$, $\mathop_f(z)$ or $\mathop_f(z)$, is the unique value $R$ such that $f(z)- R/(z-a)$ has an analytic antiderivative in a punctured disk $0<\vert z-a\vert<\delta$.

Alternatively, residues can be calculated by finding Laurent series expansions, and one can define the residue as the coefficient ''a''₋₁ of a Laurent series.

The definition of a residue can be generalized to arbitrary Riemann surfaces. Suppose $\omega$ is a 1-form on a Riemann surface. Let $\omega$ be meromorphic at some point $x$, so that we may write $\omega$ in local coordinates as $f(z) \; dz$. Then, the residue of $\omega$ at $x$ is defined to be the residue of $f(z)$ at the point corresponding to $x$.

Examples

Residue of a monomial

Computing the residue of a monomial

:$\oint_C z^k \, dz$

makes most residue computations easy to do. Since path integral computations are homotopy invariant, we will let $C$ be the circle with radius $1$. Then, using the change of coordinates $z \to e^$ we find that

: $dz \to d(e^) = ie^ \, d\theta$

hence our integral now reads as

:$\oint_C z^k dz = \int_0^ i e^ \, d\theta = \begin 2\pi i & \text k = -1, \\ 0 & \text. \end$

Application of monomial residue

As an example, consider the contour integral
:$\oint_C \,dz$
where ''C'' is some simple closed curve about 0.

Let us evaluate this integral using a standard convergence result about integration by series. We can substitute the Taylor series for $e^z$ into the integrand. The integral then becomes

:$\oint_C \left(1+z+ + + + + + \cdots\right)\,dz.$

Let us bring the 1/''z''⁵ factor into the series. The contour integral of the series then writes

:
\begin
& \oint_C \left(++ + + + + + \cdots\right)\,dz \\ pt= & \oint_C \left(++ + + + + + \cdots\right)\,dz.
\end

Since the series converges uniformly on the support of the integration path, we are allowed to exchange integration and summation.
The series of the path integrals then collapses to a much simpler form because of the previous computation. So now the integral around ''C'' of every other term not in the form ''cz''⁻¹ is zero, and the integral is reduced to

: $\oint_C \,dz= \oint_C\,dz=(2\pi i) = .$

The value 1/4! is the ''residue'' of ''e''^''z''/''z''⁵ at ''z'' = 0, and is denoted

: $\operatorname_0 , \text \operatorname_ , \text \operatorname(f,0) \text f=.$

Calculating residues

Suppose a punctured disk ''D'' = in the complex plane is given and ''f'' is a holomorphic function defined (at least) on ''D''. The residue Res(''f'', ''c'') of ''f'' at ''c'' is the coefficient ''a''₋₁ of in the Laurent series expansion of ''f'' around ''c''. Various methods exist for calculating this value, and the choice of which method to use depends on the function in question, and on the nature of the singularity.

According to the residue theorem, we have:

: $\operatorname(f,c) = \oint_\gamma f(z)\,dz$

where ''γ'' traces out a circle around ''c'' in a counterclockwise manner. We may choose the path ''γ'' to be a circle of radius ''ε'' around ''c'', where ''ε'' is as small as we desire. This may be used for calculation in cases where the integral can be calculated directly, but it is usually the case that residues are used to simplify calculation of integrals, and not the other way around.

Removable singularities

If the function ''f'' can be continued to a holomorphic function on the whole disk , y-c, , then Res(''f'', ''c'') = 0. The converse is not generally true.

Simple poles

At a simple pole ''c'', the residue of ''f'' is given by:

:$\operatorname(f,c)=\lim_(z-c)f(z).$

If that limit does not exist, there is an essential singularity there. If it is 0 then it is either analytic there or there is a removable singularity. If it is equal to infinity then the order is higher than 1.

It may be that the function ''f'' can be expressed as a quotient of two functions, $f(z)=\frac$, where ''g'' and ''h'' are holomorphic functions in a neighbourhood of ''c'', with ''h''(''c'') = 0 and ''h(''c'') ≠ 0. In such a case, L'Hôpital's rule can be used to simplify the above formula to:

:
\begin
\operatorname(f,c) & =\lim_(z-c)f(z) = \lim_\frac \\ pt& = \lim_\frac = \frac.
\end

Limit formula for higher-order poles

More generally, if ''c'' is a pole of order ''n'', then the residue of ''f'' around ''z'' = ''c'' can be found by the formula:

: $\operatorname(f,c) = \frac \lim_ \frac \left( (z-c)^n f(z) \right).$

This formula can be very useful in determining the residues for low-order poles. For higher-order poles, the calculations can become unmanageable, and series expansion is usually easier. For essential singularities, no such simple formula exists, and residues must usually be taken directly from series expansions.

Residue at infinity

In general, the residue at infinity is defined as:

: $\operatorname(f(z), \infty) = -\operatorname\left(\frac f\left(\frac 1 z \right), 0\right).$

If the following condition is met:

:$\lim_ f(z) = 0,$

then the residue at infinity can be computed using the following formula:

:$\operatorname(f, \infty) = -\lim_ z \cdot f(z).$

If instead

:$\lim_ f(z) = c \neq 0,$

then the residue at infinity is

:$\operatorname(f, \infty) = \lim_ z^2 \cdot f'(z).$

For holomorphic functions the sum of the residues at the isolated singularities plus the residue at infinity is zero.

Series methods

If parts or all of a function can be expanded into a Taylor series or Laurent series, which may be possible if the parts or the whole of the function has a standard series expansion, then calculating the residue is significantly simpler than by other methods.

See also

* The residue theorem relates a contour integral around some of a function's poles to the sum of their residues
* Cauchy's integral formula
* Cauchy's integral theorem
* Mittag-Leffler's theorem
* Methods of contour integration
* Morera's theorem
* Partial fractions in complex analysis

References

*
*

External links

*
* {{MathWorld , urlname= ComplexResidue , title= Complex Residue

Meromorphic functions