RagWing RW11 Rag-A-Bond
   HOME

TheInfoList



OR:

The RagWing RW11 Rag-A-Bond is a two-seat,
high wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes. A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...
,
strut-braced In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
,
conventional landing gear Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Term ...
, single engine
homebuilt aircraft Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.Armstrong, Kenn ...
designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.Downey, Julia: ''1999 Plans Aircraft Directory'', Kitplanes, Volume 16, Number 1, January 1999, page 66. Primedia Publications. ISSN 0891-1851Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook'', page 235. BAI Communications. The RW11 is a replica of the
Piper PA-15 Vagabond The Piper PA-15 Vagabond and PA-17 Vagabond are both two-seat, high-wing, conventional gear light aircraft that were designed for personal use and for flight training and built by Piper Aircraft starting in 1948.Montgomery, MR and Gerald Foster,: ...
.


Design and development

The RW11 was designed for the US experimental homebuilt aircraft category or as a US
FAR 103 Ultralight Vehicles Ultralight aircraft in the United States are much smaller and lighter than ultralight aircraft as defined by all other countries. In the United States, ultralights are described as "ultralight vehicles" and not as aircraft. They are not requ ...
two-seat ultralight trainer and first flown in 1996. The
airframe The mechanical structure of an aircraft is known as the airframe. This structure is typically considered to include the fuselage, undercarriage, empennage and wings, and excludes the propulsion system. Airframe design is a field of aerospa ...
is constructed entirely from wood and covered with
aircraft fabric Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are ...
. The landing gear is of conventional configuration with bungee suspension. The cabin is internally wide and drooped
STOL A short takeoff and landing (STOL) aircraft is a conventional fixed-wing aircraft that has short runway requirements for takeoff and landing. Many STOL-designed aircraft also feature various arrangements for use on airstrips with harsh conditio ...
style wingtips are optional. The aircraft's installed power range is and the standard engine is the
Rotax 503 The Rotax 503 is a , inline 2-cylinder, two-stroke aircraft engine, built by BRP-Rotax GmbH & Co. KG of Austria for use in ultralight aircraft.Raisner, William: ''LEAF catlog'', pages 6-105. Leading Edge Airfoils, 1995. As of 2011 the Ro ...
, although the
2si 690 The 2si 690 is a family of in-line three cylinder, liquid-cooled, two-stroke, dual ignition, aircraft engines that were designed for ultralight aircraft.Cliche, Andre: ''Ultralight Aircraft Shopper's Guide'' 8th Edition, page G-3 Cybair Limited P ...
and
Subaru EA-81 The Subaru EA engine is a series of automobile internal combustion engines manufactured by Subaru, a division of Fuji Heavy Industries. All EA series engines are of a flat-4 design, and have always been water cooled. Design and history Prior ...
engines have also been used. The RW11 is only offered as plans and the designer estimates it will take 500 hours to complete the aircraft.


Specifications (RW11)


References


External links

* {{RagWing Aircraft Designs Homebuilt aircraft High-wing aircraft Aircraft first flown in 1996